[U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation

[Tom Rini]

On Fri, Jan 11, 2013 at 03:45:26PM +0100, Jens Scharsig wrote:
> Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> > Fix coldfire serial driver bindings no more relocated to ram after last
> > changes to drivers/serial/serial.c (regression).
> > Serial initialization in ram has to be called after that gd->reloc_off is
> > calculated.
> > 
> > Signed-off-by: Angelo Dureghello <sysamfw at gmail.com>
> > Cc: Jason Jin <jason.jin at freescale.com>
> > ---
> > diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
> > index 02d73fd..373570c 100644
> > --- a/arch/m68k/lib/board.c
> > +++ b/arch/m68k/lib/board.c
> > @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
> > 
> >         gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
> > 
> > -       serial_initialize();
> > -
> >         debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
> > 
> >         WATCHDOG_RESET ();
> > 
> >         gd->reloc_off =  dest_addr - CONFIG_SYS_MONITOR_BASE;
> > 
> > +	serial_initialize();
> > +
> >         monitor_flash_len = (ulong)&__init_end - dest_addr;
> > 
> >  #if defined(CONFIG_NEEDS_MANUAL_RELOC)
> > 
> 
> Acked-by: Jens Scharsig (BuS Elektronik) <esw at bus-elektronik.de>
> Tested-by: Jens Scharsig (BuS Elektronik) <esw at bus-elektronik.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130111/4ff958be/attachment.pgp>