[U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
Jens Scharsig
esw at bus-elektronik.de
Fri Jan 11 15:45:26 CET 2013
Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> Fix coldfire serial driver bindings no more relocated to ram after last
> changes to drivers/serial/serial.c (regression).
> Serial initialization in ram has to be called after that gd->reloc_off is
> calculated.
>
> Signed-off-by: Angelo Dureghello <sysamfw at gmail.com>
> Cc: Jason Jin <jason.jin at freescale.com>
> ---
> diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
> index 02d73fd..373570c 100644
> --- a/arch/m68k/lib/board.c
> +++ b/arch/m68k/lib/board.c
> @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
>
> gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
>
> - serial_initialize();
> -
> debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
>
> WATCHDOG_RESET ();
>
> gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
>
> + serial_initialize();
> +
> monitor_flash_len = (ulong)&__init_end - dest_addr;
>
> #if defined(CONFIG_NEEDS_MANUAL_RELOC)
>
Acked-by: Jens Scharsig (BuS Elektronik) <esw at bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw at bus-elektronik.de>
More information about the U-Boot
mailing list