[U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition

Jaehoon Chung jh80.chung at samsung.com
Mon Jan 7 10:23:05 CET 2013


On 01/07/2013 02:54 PM, Amarendra Reddy wrote:
> Hi Jaehoon,
> 
> The sequence to be followed to access(read/write) boot partitions is i)
> open() the boot partition,  ii) Do the job , iii) Then close() boot
> partition.
> 
> I understand that
> 1) You want a single generic function "mmc_boot_part_access(struct mmc
> *mmc, int ack, int part_num, int access)" to be used
> instead of two functions open() and close().
> 2) By doing so user can specify which boot partition to be accessed (opened
> / closed).
It is just my suggestion..I didn't know other.
Well, I want to know Andy's opinion.

Best Regards,
Jaehoon Chung
> 
> Please comment.
> 
> Thanks & Regards
> Amarendra Reddy
> 
> 
> On 7 January 2013 10:04, Jaehoon Chung <jh80.chung at samsung.com> wrote:
> 
>> Hi Amar,
>>
>> If you want to access the boot partition, Need to add open/close()?
>> I think we can use like "mmc_boot_part_access(struct mmc *mmc, int ack,
>> int part_num, int access)"
>> How about this? i think it is more generic...
>>
>> On 01/07/2013 01:19 PM, Amarendra Reddy wrote:
>>> Hi Jaehoon,
>>>
>>> Yes, the functions mmc_boot_partiton_size_change(), mmc_boot_open()
>>> & mmc_boot_close() can be used
>>> by any vendor to open/close/resize-boot-partition of emmc device.
>> How can any vendor use with resize-boot-partition?
>> you used the vendor command.(you added the comment "Only use this command
>> for raw eMMC moviNAND")
>> And i think good that these functions are used with cmd_mmc.
>>
>> Best Regards,
>> Jaehoon Chung
>>  > The above 3 functions call the static function "static int
>>> mmc_send_cmd(...)" located in drivers/mmc/mmc.c.
>>> Any vendor can use the above 3 functions, if placed in drivers/mmc/mmc.c.
>>>
>>> Thanks & Regards
>>> Amarendra Reddy
>>>
>>> On 4 January 2013 15:57, Jaehoon Chung <jh80.chung at samsung.com> wrote:
>>>
>>>> Hi Amar,
>>>>
>>>> I wonder that include the moviNAND specific code in mmc.c?
>>>> mmc_boot_partiton_size_change() looks like every vendor can use this
>>>> function.
>>>>
>>>> Best Regards,
>>>> Jaehoon Chung
>>>>
>>>> On 01/04/2013 06:34 PM, Amar wrote:
>>>>> This patch adds APIs to open, close and to resize boot partiton for
>> EMMC.
>>>>>
>>>>> Changes from V1:
>>>>>       New patch.
>>>>>
>>>>> Changes from V2:
>>>>>       1)Updation of commit message and resubmition of proper patch set.
>>>>>
>>>>> Changes from V3:
>>>>>         No change.
>>>>>
>>>>> Signed-off-by: Amar <amarendra.xt at samsung.com>
>>>>> ---
>>>>>  drivers/mmc/mmc.c | 118
>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>  include/mmc.h     |  16 ++++++++
>>>>>  2 files changed, 134 insertions(+)
>>>>>
>>>>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>>>>> index 72e8ce6..8175b49 100644
>>>>> --- a/drivers/mmc/mmc.c
>>>>> +++ b/drivers/mmc/mmc.c
>>>>> @@ -1327,3 +1327,121 @@ int mmc_initialize(bd_t *bis)
>>>>>
>>>>>       return 0;
>>>>>  }
>>>>> +
>>>>> +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long
>>>> bootsize,
>>>>> +                             unsigned long rpmbsize)
>>>>> +{
>>>>> +     int err;
>>>>> +     struct mmc_cmd cmd;
>>>>> +
>>>>> +     /* Only use this command for raw EMMC moviNAND */
>>>>> +     /* Enter backdoor mode */
>>>>> +     cmd.cmdidx = MMC_CMD_RES_MAN;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +     cmd.cmdarg = MMC_CMD62_ARG1;
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_partition_size_change: Error1 = %d\n",
>>>> err);
>>>>> +             return err;
>>>>> +     }
>>>>> +
>>>>> +     /* Boot partition changing mode */
>>>>> +     cmd.cmdidx = MMC_CMD_RES_MAN;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +     cmd.cmdarg = MMC_CMD62_ARG2;
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_partition_size_change: Error2 = %d\n",
>>>> err);
>>>>> +             return err;
>>>>> +     }
>>>>> +     /* boot partition size is multiple of 128KB */
>>>>> +     bootsize = ((bootsize*1024)/128);
>>>>> +
>>>>> +     /* Arg: boot partition size */
>>>>> +     cmd.cmdidx = MMC_CMD_RES_MAN;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +     cmd.cmdarg = bootsize;
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_partition_size_change: Error3 = %d\n",
>>>> err);
>>>>> +             return err;
>>>>> +     }
>>>>> +     /* RPMB partition size is multiple of 128KB */
>>>>> +     rpmbsize = ((rpmbsize*1024)/128);
>>>>> +     /* Arg: RPMB partition size */
>>>>> +     cmd.cmdidx = MMC_CMD_RES_MAN;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +     cmd.cmdarg = rpmbsize;
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_partition_size_change: Error4 = %d\n",
>>>> err);
>>>>> +             return err;
>>>>> +     }
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +int mmc_boot_open(struct mmc *mmc)
>>>>> +{
>>>>> +     int err;
>>>>> +     struct mmc_cmd cmd;
>>>>> +
>>>>> +     /* Boot ack enable, boot partition enable , boot partition access
>>>> */
>>>>> +     cmd.cmdidx = MMC_CMD_SWITCH;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +
>>>>> +     cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24 |
>>>>> +                     EXT_CSD_PART_CONF << 16 |
>>>>> +                     (EXT_CSD_BOOT_ACK_ENABLE |
>>>>> +                     EXT_CSD_BOOT_PARTITION_ENABLE |
>>>>> +                     EXT_CSD_PARTITION_ACCESS_ENABLE) << 8);
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_open: Error1 = %d\n", err);
>>>>> +             return err;
>>>>> +     }
>>>>> +
>>>>> +     /* 4bit transfer mode at booting time. */
>>>>> +     cmd.cmdidx = MMC_CMD_SWITCH;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +
>>>>> +     cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24|
>>>>> +                     EXT_CSD_BOOT_BUS_WIDTH << 16|
>>>>> +                     ((1<<0) << 8));
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_open: Error2 = %d\n", err);
>>>>> +             return err;
>>>>> +     }
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +int mmc_boot_close(struct mmc *mmc)
>>>>> +{
>>>>> +     int err;
>>>>> +     struct mmc_cmd cmd;
>>>>> +
>>>>> +     /* Boot ack enable, boot partition enable , boot partition access
>>>> */
>>>>> +     cmd.cmdidx = MMC_CMD_SWITCH;
>>>>> +     cmd.resp_type = MMC_RSP_R1b;
>>>>> +
>>>>> +     cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24|
>>>>> +                     EXT_CSD_PART_CONF << 16|
>>>>> +                     (EXT_CSD_BOOT_ACK_ENABLE |
>>>>> +                     EXT_CSD_BOOT_PARTITION_ENABLE |
>>>>> +                     EXT_CSD_PARTITION_ACCESS_DISABLE) << 8);
>>>>> +
>>>>> +     err = mmc_send_cmd(mmc, &cmd, NULL);
>>>>> +     if (err) {
>>>>> +             debug("mmc_boot_close: Error = %d\n", err);
>>>>> +             return err;
>>>>> +     }
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> diff --git a/include/mmc.h b/include/mmc.h
>>>>> index a13e2bd..999f0a3 100644
>>>>> --- a/include/mmc.h
>>>>> +++ b/include/mmc.h
>>>>> @@ -86,6 +86,11 @@
>>>>>  #define MMC_CMD_APP_CMD                      55
>>>>>  #define MMC_CMD_SPI_READ_OCR         58
>>>>>  #define MMC_CMD_SPI_CRC_ON_OFF               59
>>>>> +#define MMC_CMD_RES_MAN                      62
>>>>> +
>>>>> +#define MMC_CMD62_ARG1                       0xefac62ec
>>>>> +#define MMC_CMD62_ARG2                       0xcbaea7
>>>>> +
>>>>>
>>>>>  #define SD_CMD_SEND_RELATIVE_ADDR    3
>>>>>  #define SD_CMD_SWITCH_FUNC           6
>>>>> @@ -153,6 +158,7 @@
>>>>>   */
>>>>>  #define EXT_CSD_PARTITIONING_SUPPORT 160     /* RO */
>>>>>  #define EXT_CSD_ERASE_GROUP_DEF              175     /* R/W */
>>>>> +#define EXT_CSD_BOOT_BUS_WIDTH               177
>>>>>  #define EXT_CSD_PART_CONF            179     /* R/W */
>>>>>  #define EXT_CSD_BUS_WIDTH            183     /* R/W */
>>>>>  #define EXT_CSD_HS_TIMING            185     /* R/W */
>>>>> @@ -177,6 +183,12 @@
>>>>>  #define EXT_CSD_BUS_WIDTH_4  1       /* Card is in 4 bit mode */
>>>>>  #define EXT_CSD_BUS_WIDTH_8  2       /* Card is in 8 bit mode */
>>>>>
>>>>> +#define EXT_CSD_BOOT_ACK_ENABLE                      (1<<6)
>>>>> +#define EXT_CSD_BOOT_PARTITION_ENABLE                (1<<3)
>>>>> +#define EXT_CSD_PARTITION_ACCESS_ENABLE              (1<<0)
>>>>> +#define EXT_CSD_PARTITION_ACCESS_DISABLE     (0<<0)
>>>>> +
>>>>> +
>>>>>  #define R1_ILLEGAL_COMMAND           (1 << 22)
>>>>>  #define R1_APP_CMD                   (1 << 5)
>>>>>
>>>>> @@ -275,6 +287,10 @@ int board_mmc_getcd(struct mmc *mmc);
>>>>>  int mmc_switch_part(int dev_num, unsigned int part_num);
>>>>>  int mmc_getcd(struct mmc *mmc);
>>>>>  void spl_mmc_load(void) __noreturn;
>>>>> +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long
>>>> bootsize,
>>>>> +                                     unsigned long rpmbsize);
>>>>> +int mmc_boot_open(struct mmc *mmc);
>>>>> +int mmc_boot_close(struct mmc *mmc);
>>>>>
>>>>>  #ifdef CONFIG_GENERIC_MMC
>>>>>  #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
>>>>>
>>>>
>>>>  _______________________________________________
>>>> U-Boot mailing list
>>>> U-Boot at lists.denx.de
>>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>
>>
>>
> 
> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 



More information about the U-Boot mailing list