[U-Boot] [PATCH v2] integrator: pass a Device Tree by default
Marek Vasut
marex at denx.de
Fri Jan 25 12:14:21 CET 2013
Dear Linus Walleij,
> This, enabled the FDT library for the Integrators, updates
> the Integrator/CP default command to load and pass a Device
> Tree when booting the kernel from the on-board ethernet,
> define same environment for the Integrator/AP and move the
> load address around to something even.
>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v1->v2:
> - Skip definition of $loadaddr, rely on CONFIG_LOAD_ADDR instead.
> ---
> include/configs/integrator-common.h | 3 ++-
> include/configs/integratorap.h | 7 +++++--
> include/configs/integratorcp.h | 9 ++++++---
> 3 files changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/include/configs/integrator-common.h
> b/include/configs/integrator-common.h index 564b418..f4a182c 100644
> --- a/include/configs/integrator-common.h
> +++ b/include/configs/integrator-common.h
> @@ -30,7 +30,7 @@
> #define CONFIG_SYS_MEMTEST_END 0x10000000
> #define CONFIG_SYS_HZ 1000
> #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
> -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
> +#define CONFIG_SYS_LOAD_ADDR 0x800 /* default load address */
> #define CONFIG_SYS_LONGHELP
> #define CONFIG_SYS_HUSH_PARSER
> #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
> @@ -41,6 +41,7 @@
>
> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> #define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_OF_LIBFDT /* enable passing a Device Tree */
> #define CONFIG_MISC_INIT_R /* call misc_init_r during start up */
>
> /*
> diff --git a/include/configs/integratorap.h
> b/include/configs/integratorap.h index c6907b5..f409f2a 100644
> --- a/include/configs/integratorap.h
> +++ b/include/configs/integratorap.h
> @@ -62,9 +62,12 @@
> */
> #include <config_cmd_default.h>
>
> -#define CONFIG_BOOTDELAY 2
> +#define CONFIG_BOOTDELAY 0
> #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0
console=tty"
> -#define CONFIG_BOOTCOMMAND ""
> +#define CONFIG_BOOTCOMMAND "setenv servip 192.168.1.100 ; " \
> + "setenv fdtaddr 0x00800000 ; " \
> + "echo \"\\\\$loadaddr = $loadaddr, \\\\$fdtaddr=$fdtaddr\" ; " \
> + "echo \"load binaries then: bootm $loadaddr - $fdtaddr\""
>
> /*
> * Miscellaneous configurable options
> diff --git a/include/configs/integratorcp.h
> b/include/configs/integratorcp.h index ca02a6f..9446edb 100644
> --- a/include/configs/integratorcp.h
> +++ b/include/configs/integratorcp.h
> @@ -60,11 +60,14 @@
> #include <config_cmd_default.h>
>
> #define CONFIG_BOOTDELAY 2
> -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty
> ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" -#define
> CONFIG_BOOTCOMMAND "tftpboot ; bootm"
> #define CONFIG_SERVERIP 192.168.1.100
> #define CONFIG_IPADDR 192.168.1.104
> -#define CONFIG_BOOTFILE "uImage"
> +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty
> ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +#define
> CONFIG_BOOTCOMMAND "setenv servip 192.168.1.100 ; " \
> + "setenv fdtaddr 0x00800000 ; " \
> + "bootp $loadaddr $servip:uImage ; " \
> + "bootp $fdtaddr $servip:integratorcp.dtb ; " \
> + "bootm $loadaddr - $fdtaddr"
Do you mean to use "serverip" here? Since "serverip" is the IP of the TFTP
server and it's used across uboot.
More information about the U-Boot
mailing list