[U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB

[Benoît Thébaudeau]

Hi Scott,

On Thursday, January 31, 2013 8:47:55 PM, Scott Wood wrote:
> Without this, all OOB reads are from the last page normally read
> (or zero at boot).  This results in bad block scans failing to look
> in the right place, and so no bad blocks are found.
> 
> Signed-off-by: Scott Wood <scottwood at freescale.com>
> ---
> From IRC discussion with a2cypher.  Compile-tested only; testing
> would be appreciated.
> 
>  drivers/mtd/nand/mxc_nand.c |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> index d0ded48..32ba340 100644
> --- a/drivers/mtd/nand/mxc_nand.c
> +++ b/drivers/mtd/nand/mxc_nand.c
> @@ -1021,6 +1021,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned
> command,
>  		break;
>  
>  	case NAND_CMD_READOOB:
> +		host->page_addr = page_addr;
>  		host->col_addr = column;
>  		host->spare_only = true;
>  		if (host->pagesize_2k)

For which NFC version and NAND Flash page size is this?

Do you have a means of duplicating the issue?

I wonder if the appropriate fix would not rather be to replace all occurrences
of "host->page_addr" with "page", except in mxc_nand_correct_data() and
mxc_nand_command(). Otherwise, it looks like there will still be weird things
going on with this variable.

Best regards,
Benoît