[U-Boot] [PATCH v2] mx6qsabreauto: enable USB host interface
Dirk Behme
dirk.behme at de.bosch.com
Tue Jan 22 10:11:21 CET 2013
From: Knut Wohlrab <knut.wohlrab at de.bosch.com>
The USB host interface is routed to plug USB1/J30 on the mother board.
Signed-off-by: Knut Wohlrab <knut.wohlrab at de.bosch.com>
---
Changes in v2:
- Don't add an empty board_ehci_hcd_init() to mx6qsabreauto.c. It's
not needed because board_ehci_hcd_init() is declared as weak.
include/configs/mx6qsabreauto.h | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index f4a082a..f2ff3e1 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -19,6 +19,17 @@
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
#include "mx6qsabre_common.h"
#define CONFIG_SYS_FSL_USDHC_NUM 2
--
1.7.0.4
More information about the U-Boot
mailing list