[U-Boot] Running vanilla u-boot v2012.10 on Guruplug

Dirk Heinrichs dirk.heinrichs at altum.de
Sun Jan 13 08:44:36 CET 2013


Am Samstag 12 Januar 2013, 15:41:54 schrieb Jason:

> > Interesting that [1] states it's possible, though...
> 
> With the dreamplug, I often load u-boot into RAM via the JTAG (0x0600000
> and 0x0800000), and then 'resume 0x0600000'.  Then use the u-boot
> running from 0x0600000 to burn the image to SPI flash from 0x0800000.
> But that's loaded via the JTAG, not from a running u-boot.

Yes, I do have a JTAG. And I have used openocd in the past to recover the 
plug, so I will try that method.

> I think I posted instructions to this mailinglist a while ago about
> this.  If you have the JTAG (it's only $35US), I would advise trying
> that.

Yes, I've seen that, too. However, I've also seen the instructions for doing 
it from within u-boot in the link I posted. Since they didn't work I thought 
it might be bug. Never thought that it wasn't supported and not supposed to 
work at all :)

Bye...

	Dirk
-- 
Dirk Heinrichs <dirk.heinrichs at altum.de>
Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
GPG Public Key C2E467BB | Jabber: dirk.heinrichs at altum.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 190 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130113/1b7e4832/attachment.pgp>


More information about the U-Boot mailing list