[U-Boot] [PATCH v7] qi_lb60: add nand spl support

[Xiangfu Liu]

Hi

Any chance merge this commit to upstream. make it a new year gift for me. :)
Thanks

Xiangfu

On 10/30/2012 08:41 AM, Scott Wood wrote:
> On 10/26/2012 08:07:47 PM, xiangfu at openmobilefree.net wrote:
>> From: Xiangfu <xiangfu at openmobilefree.net>
>>
>>   The JZ4740 CPU can load 8KB from two different addresses:
>>    1. the normal area up to 8KB starting from NAND flash address 0x00000000
>>    2. the backup area up to 8KB starting from NAND flash address 0x00002000
>>
>> Signed-off-by: Xiangfu <xiangfu at openmobilefree.net>
>> ---
>>  Makefile                          |   12 +++
>>  arch/mips/cpu/xburst/Makefile     |    7 +-
>>  arch/mips/cpu/xburst/cpu.c        |    4 +
>>  arch/mips/cpu/xburst/jz4740.c     |   82 +++++++----------
>>  arch/mips/cpu/xburst/spl/Makefile |   47 ++++++++++
>>  arch/mips/cpu/xburst/spl/start.S  |   63 +++++++++++++
>>  board/qi/qi_lb60/Makefile         |    4 +
>>  board/qi/qi_lb60/qi_lb60-spl.c    |   30 +++++++
>>  board/qi/qi_lb60/qi_lb60.c        |    8 +-
>>  board/qi/qi_lb60/u-boot-spl.lds   |   61 +++++++++++++
>>  drivers/mtd/nand/jz4740_nand.c    |   39 ++++++++-
>>  include/configs/qi_lb60.h         |  175 ++++++++++++++++++-------------------
>>  12 files changed, 386 insertions(+), 146 deletions(-)
>>  create mode 100644 arch/mips/cpu/xburst/spl/Makefile
>>  create mode 100644 arch/mips/cpu/xburst/spl/start.S
>>  create mode 100644 board/qi/qi_lb60/qi_lb60-spl.c
>>  create mode 100644 board/qi/qi_lb60/u-boot-spl.lds
> 
> For the drivers/mtd/nand part:
> Acked-by: Scott Wood <scottwood at freescale.com>
> 
> -Scott