[U-Boot] Please pull u-boot-ti/master

[Albert ARIBAUD]

Hi Tom,

On Fri, 25 Jan 2013 17:13:43 -0500, Tom Rini <trini at ti.com> wrote:

> Hello,
> 
> The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:
> 
>   fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-ti.git master
> 
> for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:
> 
>   AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)
> 
> ----------------------------------------------------------------
> Javier Martinez Canillas (3):
>       OMAP3: use a single board file for IGEP devices
>       OMAP3: igep00x0: add boot status GPIO LED
>       omap4: allow the use of a plain text env file instead boot scripts
> 
> Jeff Lance (1):
>       Add DDR3 support for AM335x-EVM (Version 1.5A)
> 
> Lars Poeschel (3):
>       am33xx: add a pulldown macro to pinmux config
>       pcm051: Add support for Phytec phyCORE-AM335x
>       am335x: display msg when reading MAC from efuse
> 
> hvaibhav at ti.com (1):
>       AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
> 
>  MAINTAINERS                                        |    3 +
>  arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   34 +++
>  arch/arm/include/asm/arch-am33xx/mux.h             |    3 +-
>  board/isee/igep0020/igep0020.h                     |  151 ----------
>  board/isee/igep0030/Makefile                       |   43 ---
>  board/isee/igep0030/igep0030.c                     |  117 --------
>  board/isee/{igep0020 => igep00x0}/Makefile         |    2 +-
>  .../{igep0020/igep0020.c => igep00x0/igep00x0.c}   |   51 +++-
>  .../{igep0030/igep0030.h => igep00x0/igep00x0.h}   |   35 ++-
>  board/phytec/pcm051/Makefile                       |   46 +++
>  board/phytec/pcm051/board.c                        |  266 +++++++++++++++++
>  board/phytec/pcm051/board.h                        |   33 +++
>  board/phytec/pcm051/mux.c                          |  133 +++++++++
>  board/ti/am335x/board.c                            |   43 ++-
>  boards.cfg                                         |    9 +-
>  include/configs/am335x_evm.h                       |    1 +
>  include/configs/igep00x0.h                         |    5 +
>  include/configs/omap4_common.h                     |   17 +-
>  include/configs/pcm051.h                           |  301 ++++++++++++++++++++
>  19 files changed, 951 insertions(+), 342 deletions(-)
>  delete mode 100644 board/isee/igep0020/igep0020.h
>  delete mode 100644 board/isee/igep0030/Makefile
>  delete mode 100644 board/isee/igep0030/igep0030.c
>  rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
>  rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
>  rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
>  create mode 100644 board/phytec/pcm051/Makefile
>  create mode 100644 board/phytec/pcm051/board.c
>  create mode 100644 board/phytec/pcm051/board.h
>  create mode 100644 board/phytec/pcm051/mux.c
>  create mode 100644 include/configs/pcm051.h

Tested with ELDK5.3, this PR introduces warnings in 5 boards.

pcm051 (introduced by 372d1d9367265e2ca698f82197ad657567c405f9):

mux.c:66:30: warning: 'gpio0_7_pin_mux' defined but not used
[-Wunused-variable]

igep0020, igem0020_nand, igep0030, igep0030_nand (introduced by
b689cd584c17b985e15744c24710d5ad34a450b0):

igep00x0.h:168:24: warning: backslash-newline at end of file [enabled
by default]

Commit authors CC:ed.

Amicalement,
-- 
Albert.