[U-Boot] Please pull u-boot-ti/master
Javier Martinez Canillas
javier at dowhile0.org
Sat Jan 26 13:22:26 CET 2013
On Sat, Jan 26, 2013 at 11:55 AM, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi Tom,
>
> On Fri, 25 Jan 2013 17:13:43 -0500, Tom Rini <trini at ti.com> wrote:
>
>> Hello,
>>
>> The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:
>>
>> fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-ti.git master
>>
>> for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:
>>
>> AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)
>>
>> ----------------------------------------------------------------
>> Javier Martinez Canillas (3):
>> OMAP3: use a single board file for IGEP devices
>> OMAP3: igep00x0: add boot status GPIO LED
>> omap4: allow the use of a plain text env file instead boot scripts
>>
>> Jeff Lance (1):
>> Add DDR3 support for AM335x-EVM (Version 1.5A)
>>
>> Lars Poeschel (3):
>> am33xx: add a pulldown macro to pinmux config
>> pcm051: Add support for Phytec phyCORE-AM335x
>> am335x: display msg when reading MAC from efuse
>>
>> hvaibhav at ti.com (1):
>> AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
>>
>> MAINTAINERS | 3 +
>> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++
>> arch/arm/include/asm/arch-am33xx/mux.h | 3 +-
>> board/isee/igep0020/igep0020.h | 151 ----------
>> board/isee/igep0030/Makefile | 43 ---
>> board/isee/igep0030/igep0030.c | 117 --------
>> board/isee/{igep0020 => igep00x0}/Makefile | 2 +-
>> .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++-
>> .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++-
>> board/phytec/pcm051/Makefile | 46 +++
>> board/phytec/pcm051/board.c | 266 +++++++++++++++++
>> board/phytec/pcm051/board.h | 33 +++
>> board/phytec/pcm051/mux.c | 133 +++++++++
>> board/ti/am335x/board.c | 43 ++-
>> boards.cfg | 9 +-
>> include/configs/am335x_evm.h | 1 +
>> include/configs/igep00x0.h | 5 +
>> include/configs/omap4_common.h | 17 +-
>> include/configs/pcm051.h | 301 ++++++++++++++++++++
>> 19 files changed, 951 insertions(+), 342 deletions(-)
>> delete mode 100644 board/isee/igep0020/igep0020.h
>> delete mode 100644 board/isee/igep0030/Makefile
>> delete mode 100644 board/isee/igep0030/igep0030.c
>> rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
>> rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
>> rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
>> create mode 100644 board/phytec/pcm051/Makefile
>> create mode 100644 board/phytec/pcm051/board.c
>> create mode 100644 board/phytec/pcm051/board.h
>> create mode 100644 board/phytec/pcm051/mux.c
>> create mode 100644 include/configs/pcm051.h
>
> Tested with ELDK5.3, this PR introduces warnings in 5 boards.
>
> pcm051 (introduced by 372d1d9367265e2ca698f82197ad657567c405f9):
>
> mux.c:66:30: warning: 'gpio0_7_pin_mux' defined but not used
> [-Wunused-variable]
>
> igep0020, igem0020_nand, igep0030, igep0030_nand (introduced by
> b689cd584c17b985e15744c24710d5ad34a450b0):
>
> igep00x0.h:168:24: warning: backslash-newline at end of file [enabled
> by default]
>
> Commit authors CC:ed.
>
> Amicalement,
> --
> Albert.
Hi Albert,
I didn't see the warning until now, sorry for being so carelessly. In
the future I'll always check for warnings before sending patches.
I already sent a patch to fix this which btw is just this one-liner:
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index 3a84335..ea1e9ac 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -167,4 +167,4 @@ static void setup_net_chip(void);
#define MUX_IGEP0030() \
MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */
Thanks a lot and sorry for the inconvenience.
Best regards,
Javier
More information about the U-Boot
mailing list