[U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
Rommel G Custodio
sessyargc at gmail.com
Wed Jan 30 14:06:32 CET 2013
On 2013.01/29, DrEagle wrote:
> Hi all,
>
> > > -----Original Message-----
> > > From: u-boot-bounces at lists.denx.de [mailto:u-boot-
> > > bounces at lists.denx.de] On Behalf Of DrEagle
> > > Sent: 22 September 2012 12:45
> > > To: DrEagle
> > > Cc: Lior Amsalem; u-boot at lists.denx.de; uboot at doukki.net
> > > Subject: [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for
> > > Sheevaplug
> > >
> > >
> > > This serie of patch add SDIO/MMC support to Sheevaplug board
> > >
> > > Change from v1:
> > > - Fix an issue with most SDHC cards because of timeout delay
> > >
> > > drEagle (5):
> > > Add Marvell SDIO/MMC driver for Kirkwood SoC
> > > Add SDIO/MMC support for kirkwood SoC
> > > Add SDIO/MMC support for Sheevaplug board
> > > Fix env address for Sheevaplug board
> > > Fix timeout in Marvell SDIO MMC driver
> >
> > Hi DrEagle
> > I still request you to study mvsdhci.c which is similar framework used for Pantheon family of SoCs,
> > try to use this infrastructure is possible for Kirkwood support.
> >
> > Regards...
> > Prafulla . . .
>
> I have started looking at sdhci component but I find only theses small details :
>
> ...
> 9) mv_sdhci.c
> -------------
> This is a component of the SDHCI support, allowing it to run on Marvell
> Kirkwood chip. It is probable the SDHCI support will have to be modified to
> allow calling functions from this file based on information passed via
> platform_data.
Slow down ...
AFAIK u-boot does not have a platform_data.
You might be confusing the Linux kernel with u-boot code.
> ...
> 16) sdhci.c
> -----------
> Follows the new API and also has a good encapsulation of the whole driver. The
> conversion here will be simple, though it'd be necessary to modify this driver
> to also support the Kirkwood series and probably also Tegra series of CPUs.
> See the respective parts of this section for details.
> ...
>
> Can anybody give me more advice on how to port efficiently a patch for SDIO/MMC for SheevaPlug/Kirkwood SoC while using, as Prafulla asked, the *sdhci* framework.
>
The u-boot SDHCI framework is simple.
mmc.c and sdhci.c implements the basic core functionality for SD/MMC
access.
The developer has to define the controller as Jagan mentioned in another
e-mail. In defining the controller you can provide your register access
functions (XXX_ACCESSORS) for those host controllers that don't follow
the SD Host contoller register layout or for quirks in accessing the
registers.
All the best,
Rommel
> What are the best practices and the technical details which can help me into this ?
>
> Regards,
> drEagle
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list