[U-Boot] [PATCH v6 2/2] board: add support for amcore board
Angelo Dureghello
sysamfw at gmail.com
Sat Jan 26 13:40:11 CET 2013
Add support for Sysam AMCORE mcf5307 (coldfire) based board.
Signed-off-by: Angelo Dureghello <sysamfw at gmail.com>
Cc: Jason Jin <jason.jin at freescale.com>
---
Changes for v2:
- None
Changes for v3:
- Fix code format issues
Changes for v4:
- Add MAINTAINERS file entry
- Remove all unnecessary blank lines
- Add get_ram_size in sdram init
- Reuse already existing sdram test routine
- Remove custom flash.c, used std mtd/CFI driver
Changes for v5:
- Fix MAINTAINERS bad sorted entry
- Fix incorrect indentation
- Remove #undef where not needed
- Fix CONFIG_SYS_SDRAM_SIZE to be in bytes
Changes for v6:
- Remove still some #undef not needed in amcore.h
- Remove custom sdram test routine
---
MAINTAINERS | 4 +
board/sysam/amcore/Makefile | 43 ++++++
board/sysam/amcore/amcore.c | 123 ++++++++++++++++
board/sysam/amcore/config.mk | 23 +++
board/sysam/amcore/u-boot.lds | 101 ++++++++++++++
boards.cfg | 1 +
include/configs/amcore.h | 206 +++++++++++++++++++++++++++
7 files changed, 501 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 28c052d..f3a6d39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -149,6 +149,10 @@ Wolfgang Denk <wd at denx.de>
PCIPPC2 MPC750
PCIPPC6 MPC750
+Angelo Dureghello <sysamfw at gmail.com>
+
+ amcore mcf5307
+
Phil Edworthy <phil.edworthy at renesas.com>
rsk7264 SH7264
diff --git a/board/sysam/amcore/Makefile b/board/sysam/amcore/Makefile
new file mode 100644
index 0000000..1fd25a8
--- /dev/null
+++ b/board/sysam/amcore/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (c) 2011 Angelo Dureghello <sysamfw at gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c
new file mode 100644
index 0000000..a665570
--- /dev/null
+++ b/board/sysam/amcore/amcore.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2012 Angelo Dureghello <sysamfw at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copy memory testdram() from sandburst/common/sb_common.c
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+
+void init_lcd(void)
+{
+ /*
+ * board can have a K0108 lcd connected on the parallel port,
+ * wired as below:
+ *
+ * fc cpu P0 P1 P2 P3 P4 P5 P6 P7 P10 P11 P12 P13 P14
+ * lcd D0 D1 D2 D3 D4 D5 D6 D7 CS1 CS2 RW DI E
+ *
+ * Starting up setting lines in high impedance
+ */
+ sim_t *sim = (sim_t *)(MMAP_SIM);
+
+ out_be16(&sim->par, 0x300);
+
+ gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
+
+ out_be16(&gpio->paddr, 0xfcff);
+ out_be16(&gpio->padat, 0x0c00);
+}
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("AMCORE v.001(alpha)\n");
+
+ init_lcd();
+
+ return 0;
+}
+
+/*
+ * in initdram we are here executing from flash
+ * case 1:
+ * is with no ACR/flash cache enabled
+ * nop = 40ns (scope measured)
+ */
+void fudelay(int usec)
+{
+ while (usec--)
+ asm volatile ("nop");
+}
+
+phys_size_t initdram(int board_type)
+{
+ u32 dramsize, RC;
+
+ dramctrl_t *dc = (dramctrl_t *)(MMAP_DRAMC);
+
+ /*
+ * SDRAM MT48LC4M32B2 details
+ * Memory block 0: 16 MB of SDRAM at address $00000000
+ * Port size: 32-bit port
+ *
+ * Memory block 0 wired as follows:
+ * CPU : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
+ * SDRAM : A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 BA0 BA1
+ *
+ * Ensure that there is a delay of at least 100 microseconds from
+ * processor reset to the following code so that the SDRAM is ready
+ * for commands.
+ */
+ fudelay(100);
+
+ /*
+ * DCR
+ * set proper RC as per specification
+ */
+ RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
+ RC = (RC * 15) >> 4;
+
+ /* 0x8000 is the faster option */
+ out_be16(&dc->dcr, 0x8200 | RC);
+
+ /*
+ * DACR0, page mode continuous, CMD on A20 0x0300
+ */
+ out_be32(&dc->dacr0, 0x00003304);
+
+ dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
+ out_be32(&dc->dmr0, dramsize|1);
+
+ /* issue a PRECHARGE ALL */
+ out_be32(&dc->dacr0, 0x0000330c);
+ out_be32(0x00000004, 0xbeaddeed);
+ /* issue AUTOREFRESH */
+ out_be32(&dc->dacr0, 0x0000b304);
+ /* let refresh occour */
+ fudelay(1);
+
+ out_be32(&dc->dacr0, 0x0000b344);
+ out_be32(0x00000c00, 0xbeaddeed);
+
+ return get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE);
+}
diff --git a/board/sysam/amcore/config.mk b/board/sysam/amcore/config.mk
new file mode 100644
index 0000000..cb45c2c
--- /dev/null
+++ b/board/sysam/amcore/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2011 Angelo Dureghello <sysamfw at gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_SYS_TEXT_BASE = 0xffc00000
diff --git a/board/sysam/amcore/u-boot.lds b/board/sysam/amcore/u-boot.lds
new file mode 100644
index 0000000..ccb770d
--- /dev/null
+++ b/board/sysam/amcore/u-boot.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2011 Angelo Dureghello <sysamfw at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ .text :
+ {
+ arch/m68k/cpu/mcf530x/start.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.text)
+
+ *(.text)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ KEEP(*(.got))
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.sdata)
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ _sbss = .;
+ *(.sbss*)
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ __bss_end__ = . ;
+ PROVIDE (end = .);
+}
diff --git a/boards.cfg b/boards.cfg
index e4b0d44..6e9b952 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -388,6 +388,7 @@ M5271EVB m68k mcf52x2 m5271evb freesca
M5272C3 m68k mcf52x2 m5272c3 freescale
M5275EVB m68k mcf52x2 m5275evb freescale
M5282EVB m68k mcf52x2 m5282evb freescale
+amcore m68k mcf530x amcore sysam
astro_mcf5373l m68k mcf532x mcf5373l astro
M53017EVB m68k mcf532x m53017evb freescale
M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0
diff --git a/include/configs/amcore.h b/include/configs/amcore.h
new file mode 100644
index 0000000..fe3fe16
--- /dev/null
+++ b/include/configs/amcore.h
@@ -0,0 +1,206 @@
+/*
+ * Configuation settings for the Sysam AMCORE board.
+ *
+ * Copyright (c) 2012 Angelo Dureghello <sysamfw at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _AMCORE_H
+#define _AMCORE_H
+
+/*
+ * AMCORE flash memory map
+ *
+ * As per CONFIG_SYS_SST_SECTSZ, amcore SST39VF3201B flash
+ * is organized into 1024 x 4K small secotrs (total 4MB).
+ *
+ * 0xffc00000 flash start
+ * 0xffc00000 u-boot code (128-4kB)
+ * 0xffc1f000 u-boot env (4kB)
+ * -----------------------------------------
+ * 0xffc20000 to
+ * 0xffffffff reserved for os usage
+ */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF530x /* define processor family */
+#define CONFIG_M5307 /* define processor type */
+
+#define CONFIG_MCFTMR
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT 0
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , \
+ 57600, 115200 }
+
+/* autoboot delay in seconds */
+#define CONFIG_BOOTDELAY 1
+/* autoboot command */
+#define CONFIG_BOOTCOMMAND "bootm ffc20000"
+
+/*
+ * Command line configuration.
+ */
+
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_TIMER
+#define CONFIG_CMD_DIAG
+
+#define CONFIG_SYS_PROMPT "amcore$ "
+#undef CONFIG_SYS_LONGHELP /* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+/* Console I/O buff. size */
+#define CONFIG_SYS_CBSIZE 1024
+#else
+#define CONFIG_SYS_CBSIZE 256
+#endif
+/* Print buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+/* Boot argument buffer size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* no console @ startup */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+
+#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
+
+#define CONFIG_SYS_MEMTEST_START 0x0
+#define CONFIG_SYS_MEMTEST_END 0x1000000
+
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Clock configuration: enable only one of the following options
+ */
+
+/* MCF5307 cpu run at 90MHz, set as bus clock x 2 */
+#define CONFIG_SYS_CLK 45000000
+#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
+
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size of used SRAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 0x1000000 /* in Bytes */
+#define CONFIG_SYS_FLASH_BASE 0xffc00000
+#define CONFIG_SYS_TEXT_BASE 0xffc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+
+/*
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+/* amcore design has flash data bytes wired swapped */
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
+
+/* reserve 128-4KB */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN ((128-4)*1024)
+#define CONFIG_SYS_MALLOC_LEN (1*1024*1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x1000 /* Size of env. data */
+#define CONFIG_ENV_SECT_SIZE 0x1000 /* see README */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_SIZE << 20)
+
+/*
+ * Cache Configuration
+ *
+ * Special 8K version 3 core cache.
+ * This is a single unified instruction/data cache.
+ * sdram - single region - no masks
+ */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \
+ CF_ACR_EN)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \
+ CF_CACR_EC)
+
+/*
+ * Memory bank definitions
+ */
+
+/* CS0 - AMD Flash, address 0xffc00000 */
+#define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16)
+/* 4MB, AA=0,V=1 C/I BIT for errata */
+#define CONFIG_SYS_CS0_MASK 0x003f0001
+/* WS=10, AA=1, PS=16bit (10) */
+#define CONFIG_SYS_CS0_CTRL 0x1980
+
+
+/* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
+#define CONFIG_SYS_CS1_BASE 0x3000
+#define CONFIG_SYS_CS1_MASK 0x00070001
+#define CONFIG_SYS_CS1_CTRL 0x0100
+
+#endif /*_AMCORE_H*/
More information about the U-Boot
mailing list