[U-Boot] [PATCH v2 5/7] tegra: usb: various small cleanups
Simon Glass
sjg at chromium.org
Fri Jan 25 22:23:56 CET 2013
On Sat, Jan 26, 2013 at 3:41 AM, Lucas Stach <dev at lynxeye.de> wrote:
> Remove unneeded headers, function prototype and stale comment, that
> doesn't match the actual codebase anymore.
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
Acked-by: Simon Glass <sjg at chromium.org>
> ---
> arch/arm/cpu/armv7/tegra20/usb.c | 13 +------------
> arch/arm/include/asm/arch-tegra20/usb.h | 3 ---
> 2 files changed, 1 insertion(+), 15 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
> index e4165e0..3fdd5df 100644
> --- a/arch/arm/cpu/armv7/tegra20/usb.c
> +++ b/arch/arm/cpu/armv7/tegra20/usb.c
> @@ -25,21 +25,15 @@
> #include <asm/io.h>
> #include <asm-generic/gpio.h>
> #include <asm/arch/clock.h>
> -#include <asm/arch/gpio.h>
> -#include <asm/arch/pinmux.h>
> -#include <asm/arch/tegra.h>
> #include <asm/arch/usb.h>
> #include <usb/ulpi.h>
> -#include <asm/arch-tegra/clk_rst.h>
> -#include <asm/arch-tegra/sys_proto.h>
> -#include <asm/arch-tegra/uart.h>
> #include <libfdt.h>
> #include <fdtdec.h>
>
> #ifdef CONFIG_USB_ULPI
> #ifndef CONFIG_USB_ULPI_VIEWPORT
> #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \
> - define CONFIG_USB_ULPI_VIEWPORT"
> + define CONFIG_USB_ULPI_VIEWPORT"
> #endif
> #endif
>
> @@ -191,11 +185,6 @@ void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
> /* Enable the UTMIP PHY */
> if (config->utmi)
> setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
> -
> - /*
> - * TODO: where do we take the USB1 out of reset? The old code would
> - * take USB3 out of reset, but not USB1. This code doesn't do either.
> - */
> }
>
> /* set up the UTMI USB controller with the parameters provided */
> diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
> index fdbd127..b18c850 100644
> --- a/arch/arm/include/asm/arch-tegra20/usb.h
> +++ b/arch/arm/include/asm/arch-tegra20/usb.h
> @@ -243,9 +243,6 @@ struct usb_ctlr {
> #define VBUS_VLD_STS (1 << 26)
>
>
> -/* Change the USB host port into host mode */
> -void usb_set_host_mode(void);
> -
> /* Setup USB on the board */
> int board_usb_init(const void *blob);
>
> --
> 1.8.0.2
>
More information about the U-Boot
mailing list