[U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
Jeroen Hofstee
jeroen at myspectrum.nl
Sun Jan 20 21:59:18 CET 2013
Hello Nikita,
On 12/23/2012 08:03 AM, Nikita Kiryanov wrote:
> Add support for dvi displays with user selectable dvi presets.
>
> Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
> board/cm_t35/Makefile | 1 +
> board/cm_t35/cm_t35.c | 3 +
> board/cm_t35/display.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/cm_t35.h | 6 ++
> 4 files changed, 223 insertions(+)
> create mode 100644 board/cm_t35/display.c
>
> diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile
> index 894fa09..bde56e6 100644
> --- a/board/cm_t35/Makefile
> +++ b/board/cm_t35/Makefile
> @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
> LIB = $(obj)lib$(BOARD).o
>
> COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
> +COBJS-$(CONFIG_LCD) += display.o
>
> COBJS := cm_t35.o leds.o $(COBJS-y)
>
> diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
> index edbb941..8f3d735 100644
> --- a/board/cm_t35/cm_t35.c
> +++ b/board/cm_t35/cm_t35.c
> @@ -216,6 +216,9 @@ static void cm_t3x_set_common_muxconf(void)
> /* SB-T35 Ethernet */
> MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/
>
> + /* DVI enable */
> + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/
> +
> /* CM-T3x Ethernet */
> MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
> MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/
> diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c
> new file mode 100644
> index 0000000..11b8ed9
> --- /dev/null
> +++ b/board/cm_t35/display.c
> @@ -0,0 +1,213 @@
> +/*
> + * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il>
> + *
> + * Authors: Nikita Kiryanov <nikita at compulab.co.il>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <stdio_dev.h>
> +#include <asm/arch/dss.h>
> +#include <lcd.h>
> +#include <asm/arch-omap3/dss.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +enum display_type {
> + NONE,
> + DVI,
> +};
> +
> +/*
> + * The frame buffer is allocated before we have the chance to parse user input.
> + * To make sure enough memory is allocated for all resolutions, we define
> + * vl_{col | row} to the maximal resolution supported by OMAP3.
> + */
> +vidinfo_t panel_info = {
> + .vl_col = 1400,
> + .vl_row = 1050,
> + .vl_bpix = 4, /* 16-bits pixel data */
There is no need to hardcode the magic 4, just use LCD_BPP
> + .cmap = (ushort *)0x80100000,
> +};
> +
> +static struct panel_config panel_cfg;
> +static enum display_type lcd_def;
> +
> +static const struct panel_config preset_dvi_640X480 = {
> + .lcd_size = PANEL_LCD_SIZE(640, 480),
> + .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
> + .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
> + .divisor = 12 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +static const struct panel_config preset_dvi_800X600 = {
> + .lcd_size = PANEL_LCD_SIZE(800, 600),
> + .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
> + .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
> + .divisor = 8 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +static const struct panel_config preset_dvi_1024X768 = {
> + .lcd_size = PANEL_LCD_SIZE(1024, 768),
> + .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
> + .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
> + .divisor = 5 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +static const struct panel_config preset_dvi_1152X864 = {
> + .lcd_size = PANEL_LCD_SIZE(1152, 864),
> + .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
> + .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
> + .divisor = 3 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +static const struct panel_config preset_dvi_1280X960 = {
> + .lcd_size = PANEL_LCD_SIZE(1280, 960),
> + .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
> + .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
> + .divisor = 3 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +static const struct panel_config preset_dvi_1280X1024 = {
> + .lcd_size = PANEL_LCD_SIZE(1280, 1024),
> + .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
> + .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
> + .divisor = 3 | (1 << 16),
> + .data_lines = LCD_INTERFACE_24_BIT,
> + .panel_type = ACTIVE_DISPLAY,
> + .load_mode = 2,
> +};
> +
> +/*
> + * set_resolution_params()
> + *
> + * Due to usage of multiple display related APIs resolution data is located in
> + * more than one place. This function updates them all.
> + */
> +static void set_resolution_params(int x, int y)
> +{
> + panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y);
> + panel_info.vl_col = x;
> + panel_info.vl_row = y;
> + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
> +}
> +
> +static void set_preset(const struct panel_config preset, int x_res, int y_res)
> +{
> + panel_cfg = preset;
> + set_resolution_params(x_res, y_res);
> +}
> +
> +static enum display_type set_dvi_preset(const struct panel_config preset,
> + int x_res, int y_res)
> +{
> + set_preset(preset, x_res, y_res);
> + return DVI;
> +}
> +
> +/*
> + * env_parse_displaytype() - parse display type.
> + *
> + * Parses the environment variable "displaytype", which contains the
> + * name of the display type or preset, in which case it applies its
> + * configurations.
> + *
> + * Returns the type of display that was specified.
> + */
> +static enum display_type env_parse_displaytype(char *displaytype)
> +{
> + if (!strncmp(displaytype, "dvi640x480", 10))
> + return set_dvi_preset(preset_dvi_640X480, 640, 480);
> + else if (!strncmp(displaytype, "dvi800x600", 10))
> + return set_dvi_preset(preset_dvi_800X600, 800, 600);
> + else if (!strncmp(displaytype, "dvi1024x768", 11))
> + return set_dvi_preset(preset_dvi_1024X768, 1024, 768);
> + else if (!strncmp(displaytype, "dvi1152x864", 11))
> + return set_dvi_preset(preset_dvi_1152X864, 1152, 864);
> + else if (!strncmp(displaytype, "dvi1280x960", 11))
> + return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
> + else if (!strncmp(displaytype, "dvi1280x1024", 12))
> + return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
> +
> + return NONE;
> +}
I think the lcd_line_length is no longer needed. ( but I haven't checked)
Wondering if this should be board specific..
> +
> +int lcd_line_length;
> +int lcd_color_fg;
> +int lcd_color_bg;
> +void *lcd_base;
> +short console_col;
> +short console_row;
> +void *lcd_console_address;
> +
fyi, I try to get rid of those, see
http://patchwork.ozlabs.org/patch/211562/.
Will repost v2 after this... No idea how this gets merged, but you might end
with some unused globals.
> +void lcd_ctrl_init(void *lcdbase)
> +{
> + struct dispc_regs *dispc = (struct dispc_regs *)OMAP3_DISPC_BASE;
> + struct prcm *prcm = (struct prcm *)PRCM_BASE;
> + char *displaytype = getenv("displaytype");
> +
> + if (displaytype == NULL)
> + return;
> +
> + lcd_def = env_parse_displaytype(displaytype);
> + if (lcd_def == NONE)
> + return;
> +
> + panel_cfg.frame_buffer = lcdbase;
> + omap3_dss_panel_config(&panel_cfg);
> + /*
> + * Pixel clock is defined with many divisions and only few
> + * multiplications of the system clock. Since DSS FCLK divisor is set
> + * to 16 by default, we need to set it to a smaller value, like 3
> + * (chosen via trial and error).
> + */
bah, guessing timer values, this might help you
https://github.com/jhofstee/u-boot/blob/bpp3_dev2/board/victron/bpp3/lcd_timing.c
(a bit old, but simply downloading the file should work, and yes it
might warn a bit)
The whole routine should go to the video driver in my opinion.
> + clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
> + /*
> + * Some of what the omap3_dss_panel_config() function did, needs to be
> + * adjusted, otherwise the image will be messed up/not appear at all.
> + */
> + clrsetbits_le32(&dispc->gfx_attributes, 0xF << 1, GFXFORMAT_RGB16 << 1);
> + clrsetbits_le32(&dispc->gfx_attributes, 0x3 << 6, GFXBURSTSIZE16 << 6);
> +}
mmm, do you really need 16 bit support? lcd.c is easily extended
to 32 bit support (I have a patch for it) and then you can drop the driver
adjustment. Anyway, if you want 16 bit support it should go into the driver
and not in your board in my opinion.
> +void lcd_enable(void)
> +{
> + if (lcd_def == DVI) {
> + gpio_direction_output(54, 0); /* Turn on DVI */
> + omap3_dss_enable();
> + }
> +}
> +
> +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
> index fa6eb4e..8544b15 100644
> --- a/include/configs/cm_t35.h
> +++ b/include/configs/cm_t35.h
> @@ -339,4 +339,10 @@
> #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
> #endif
>
> +/* Display Configuration */
> +#define CONFIG_OMAP3_GPIO_2
> +#define CONFIG_VIDEO_OMAP3
> +
> +#define CONFIG_LCD
> +
> #endif /* __CONFIG_H */
Regards,
Jeroen
More information about the U-Boot
mailing list