[U-Boot] [PATCH V3 0/9] separate miiphy from ethernet

Troy Kisky troy.kisky at boundarydevices.com
Wed Jan 23 00:48:04 CET 2013


On 11/10/2012 12:28 AM, Stefano Babic wrote:
> On 23/10/2012 04:40, Troy Kisky wrote:
>> This series tries to separate the mii regsisters
>> from the ethernet registers as suggested by
>> Andy Fleming. Then, mx6qsabrelite is changed
>> to find the phy address from the possibles 4-7.
>>
>> The V3 series is very different from V2.
>>
>> Troy Kisky (9):
>>    doc/README.fec_mxc: add documentation
>>    net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
>>    net: fec_mxc: change fec_mii_setspeed parameter
>>    net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
>>    phy: add phy_find_by_mask/phy_connect_dev
>>    net: fec_mxc: use fec_set_dev_name to set name
>>    net: fec_mxc: only call phy_connect in fec_probe
>>    net: fec_mxc: get phydev before fec_probe
>>    mx6qsabrelite: search mii phy address 4-7
>>
> Hi Joe,
>
>>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   24 +++-
>>   doc/README.fec_mxc                            |   27 ++++
>>   drivers/net/fec_mxc.c                         |  164 ++++++++++++++-----------
>>   drivers/net/fec_mxc.h                         |    2 +-
>>   drivers/net/phy/phy.c                         |  128 +++++++++++--------
>>   include/configs/m28evk.h                      |    1 -
>>   include/configs/mx28evk.h                     |    1 -
>>   include/configs/sc_sps_1.h                    |    1 -
>>   include/netdev.h                              |    7 ++
>>   include/phy.h                                 |    3 +
>>   10 files changed, 227 insertions(+), 131 deletions(-)
>>   create mode 100644 doc/README.fec_mxc
> Patches are assigned to me in patchworks. Do you have any issue with
> this patchset ? If it is ok for you, I will apply it to u-boot-imx.
>
> Best regards,
> Stefano
>
>

Who should I pester to see some progress on this ?


Thanks
Troy



More information about the U-Boot mailing list