[U-Boot] [PATCH 5/6] mxs: mmc: Fix the MMC driver for MX23
Marek Vasut
marex at denx.de
Wed Jan 23 02:01:04 CET 2013
The MX23 has different layout of DMA channels. Fix the MMC
driver to support MX23.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
---
drivers/mmc/mxsmmc.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 023dbd5..a72f66c 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -53,6 +53,12 @@ struct mxsmmc_priv {
struct mxs_dma_desc *desc;
};
+#if defined(CONFIG_MX23)
+static const unsigned int mxsmmc_id_offset = 1;
+#elif defined(CONFIG_MX28)
+static const unsigned int mxsmmc_id_offset = 0;
+#endif
+
#define MXSMMC_MAX_TIMEOUT 10000
#define MXSMMC_SMALL_TRANSFER 512
@@ -131,7 +137,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
+ dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset;
mxs_dma_desc_append(dmach, priv->desc);
if (mxs_dma_go(dmach)) {
bounce_buffer_stop(&bbstate);
@@ -222,14 +228,25 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
}
ctrl0 |= SSP_CTRL0_DATA_XFER;
+
+ reg = data->blocksize * data->blocks;
+#if defined(CONFIG_MX23)
+ ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK;
+
+ clrsetbits_le32(&ssp_regs->hw_ssp_cmd0,
+ SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK,
+ ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) |
+ ((ffs(data->blocksize) - 1) <<
+ SSP_CMD0_BLOCK_SIZE_OFFSET));
+#elif defined(CONFIG_MX28)
+ writel(reg, &ssp_regs->hw_ssp_xfer_size);
+
reg = ((data->blocks - 1) <<
SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
((ffs(data->blocksize) - 1) <<
SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
writel(reg, &ssp_regs->hw_ssp_block_size);
-
- reg = data->blocksize * data->blocks;
- writel(reg, &ssp_regs->hw_ssp_xfer_size);
+#endif
}
/* Kick off the command */
@@ -401,7 +418,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
return -ENOMEM;
}
- ret = mxs_dma_init_channel(id);
+ ret = mxs_dma_init_channel(id + mxsmmc_id_offset);
if (ret)
return ret;
--
1.7.10.4
More information about the U-Boot
mailing list