[U-Boot] [PATCH V2] mxs: Boost the memory power supply

Marek Vasut marex at denx.de
Tue Jan 22 01:57:03 CET 2013


The memory power supply on MX23 didn't pump out enough juice into
the DRAM chip, thus caused occasional memory corruption. Fix this.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c |    4 ++--
 board/olimex/mx23_olinuxino/spl_boot.c    |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

V2: Base this on top of u-boot-imx/master

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index 5944dd2..836e636 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -230,7 +230,7 @@ static void mx23_mem_setup_vddmem(void)
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_ILIMIT |
 		POWER_VDDMEMCTRL_ENABLE_LINREG |
 		POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -238,7 +238,7 @@ static void mx23_mem_setup_vddmem(void)
 
 	early_delay(10000);
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_LINREG,
 		&power_regs->hw_power_vddmemctrl);
 }
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index aaebe6c..6cf669f 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -29,7 +29,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */
-- 
1.7.10.4



More information about the U-Boot mailing list