[U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support

[Timur Tabi]

Shaohui Xie wrote:
> Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
> ---

These patches only add one line each, and each depends on the previous
anyway.  They should be merged into one patch.

>  boards.cfg |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/boards.cfg b/boards.cfg
> index e4b0d44..8cf4936 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -855,6 +855,7 @@ P5020DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freesca
>  P5020DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
>  P5020DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
>  P5040DS                      powerpc     mpc85xx     corenet_ds          freescale
> +P5040DS_NAND		     powerpc     mpc85xx     corenet_ds          freescale      -           P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
>  BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
>  stxgp3                       powerpc     mpc85xx     stxgp3              stx
>  stxssa                       powerpc     mpc85xx     stxssa              stx            -           stxssa
> 


-- 
Timur Tabi
Linux kernel developer at Freescale