[U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND

[Nikita Kiryanov]

Hi Wolfgang Denk,

On 01/29/2013 03:50 PM, Wolfgang Denk wrote:
> Dear Nikita Kiryanov,
>
> In message <1359463349-11649-8-git-send-email-nikita at compulab.co.il> you wrote:
>> Add support for loading splash image from NAND
>>
>> Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
>> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
>> ---
>> Changes in V2:
>> 	- Added fix to bmp_load_addr to comply with what happens in lcd.c
>> 	following patch number 3.
>>
>>   board/cm_t35/cm_t35.c    |   65 ++++++++++++++++++++++++++++++++++++++++++++++
>>   include/configs/cm_t35.h |    4 +++
>>   2 files changed, 69 insertions(+)
>
> Why exactly do you need to add code here?
>
> Is it not sufficient to add, for example, a "nand read" command as
> part of your "preboot" settings?

The preboot commands are executed after lcd is turned on; ideally, the
splashimage should be in the frame buffer before that. There is also
the issue of having to fix the bmp load address to the appropriate
alignment (to comply with a similar fix in lcd.c from patch 3), and
checking for problems such as overwriting U-Boot data with the bmp. I
don't think Hush is the right tool for these actions.

>
> Best regards,
>
> Wolfgang Denk
>


-- 
Regards,
Nikita.