[U-Boot] [PATCH v2 2/7] tegra: usb: make controller init functions more self contained
Simon Glass
sjg at chromium.org
Sun Jan 27 17:31:01 CET 2013
Hi Lucas,
On Sat, Jan 26, 2013 at 3:41 AM, Lucas Stach <dev at lynxeye.de> wrote:
> There is no need to pass around all those parameters. The init functions
> are able to easily extract all the needed setup info on their own.
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
Acked-by: Simon Glass <sjg at chromium.org>
Minor comment: I think the commit message should include what you have
below the --- since it provides the motivation for the commit.
> ---
> To clarify why this is a good thing an excerpt from the first round of
> review:
> "The intent of this patch is not really to save up on parameters passed,
> but to make it possible to later move out the controller initialization
> into the ehci_hcd_init function without having to save away this global
> state for later use[,thus avoid bloating the file global state]."
> ---
> arch/arm/cpu/armv7/tegra20/usb.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
> index f151fb2..07c1ade 100644
> --- a/arch/arm/cpu/armv7/tegra20/usb.c
> +++ b/arch/arm/cpu/armv7/tegra20/usb.c
> @@ -198,11 +198,12 @@ void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
> }
>
> /* set up the UTMI USB controller with the parameters provided */
> -static int init_utmi_usb_controller(struct fdt_usb *config,
> - struct usb_ctlr *usbctlr, const u32 timing[])
> +static int init_utmi_usb_controller(struct fdt_usb *config)
> {
> u32 val;
> int loop_count;
> + const unsigned *timing;
> + struct usb_ctlr *usbctlr = config->reg;
>
> clock_enable(config->periph_id);
>
> @@ -229,6 +230,8 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
> * PLL Delay CONFIGURATION settings. The following parameters control
> * the bring up of the plls.
> */
> + timing = usb_pll[clock_get_osc_freq()];
> +
> val = readl(&usbctlr->utmip_misc_cfg1);
> clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
> timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
> @@ -331,12 +334,12 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
> #endif
>
> /* set up the ULPI USB controller with the parameters provided */
> -static int init_ulpi_usb_controller(struct fdt_usb *config,
> - struct usb_ctlr *usbctlr)
> +static int init_ulpi_usb_controller(struct fdt_usb *config)
> {
> u32 val;
> int loop_count;
> struct ulpi_viewport ulpi_vp;
> + struct usb_ctlr *usbctlr = config->reg;
>
> /* set up ULPI reference clock on pllp_out4 */
> clock_enable(PERIPH_ID_DEV2_OUT);
> @@ -408,8 +411,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config,
> return 0;
> }
> #else
> -static int init_ulpi_usb_controller(struct fdt_usb *config,
> - struct usb_ctlr *usbctlr)
> +static int init_ulpi_usb_controller(struct fdt_usb *config)
> {
> printf("No code to set up ULPI controller, please enable"
> "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT");
> @@ -430,22 +432,20 @@ static void config_clock(const u32 timing[])
> * @param config USB port configuration
> * @return 0 if ok, -1 if error (too many ports)
> */
> -static int add_port(struct fdt_usb *config, const u32 timing[])
> +static int add_port(struct fdt_usb *config)
> {
> - struct usb_ctlr *usbctlr = config->reg;
> -
> if (port_count == USB_PORTS_MAX) {
> printf("tegrausb: Cannot register more than %d ports\n",
> USB_PORTS_MAX);
> return -1;
> }
>
> - if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) {
> + if (config->utmi && init_utmi_usb_controller(config)) {
> printf("tegrausb: Cannot init port\n");
> return -1;
> }
>
> - if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) {
> + if (config->ulpi && init_ulpi_usb_controller(config)) {
> printf("tegrausb: Cannot init port\n");
> return -1;
> }
> @@ -558,7 +558,7 @@ int board_usb_init(const void *blob)
> return -1;
> }
>
> - if (add_port(&config, usb_pll[freq]))
> + if (add_port(&config))
> return -1;
> set_host_mode(&config);
> }
> --
> 1.8.0.2
>
More information about the U-Boot
mailing list