[U-Boot] [PATCH V2 2/2] EXYNOS5: Enable console multiplexing in u-boot
Ajay Kumar
ajaykumar.rs at samsung.com
Fri Jan 11 08:06:11 CET 2013
We enable console multiplexing and use both serial and LCD for stdout/stderr.
Initially, u-boot output console is observed via serial port.
If you also have a DP panel connected onto your SMDK5250 board,
you can switch to LCD console by typing "setenv stdout lcd".
You can always switch back to serial using "setenv stdout serial".
You can switch error console(stderr) as well, using similar commands.
Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in V2: We use CONFIG_CONSOLE_MUX always. In V1, CONFIG_CONSOLE_MUX
was enabled only when CONFIG_LCD is selected.
include/configs/exynos5250-dt.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 298bae9..6912936 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -77,6 +77,17 @@
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
#define TZPC_BASE_OFFSET 0x10000
/* SD/MMC configuration */
--
1.8.0
More information about the U-Boot
mailing list