[U-Boot] [PATCH 3/3 V5] PMIC: MAX77686: Add FDT Support

Simon Glass sjg at chromium.org
Fri Jan 11 07:02:02 CET 2013


Hi Rajeshwari,

On Tue, Jan 8, 2013 at 11:03 PM, Rajeshwari Shinde
<rajeshwari.s at samsung.com> wrote:
> This patch adds fdt support to MAX77686.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> ---
> Changes in V2:
>         - Corrected indentation errors.
> Changes in V3:
>         - Rebased on top of the latest implementation
>         of PMIC
> Changes in V4:
>         - Corrected PMIC register address
> Changes in V5:
>         - None.
>  drivers/power/pmic/pmic_max77686.c |   37 +++++++++++++++++++++++++++++++++--
>  1 files changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
> index fce0183..7fcb4c0 100644
> --- a/drivers/power/pmic/pmic_max77686.c
> +++ b/drivers/power/pmic/pmic_max77686.c
> @@ -22,10 +22,14 @@
>   */
>
>  #include <common.h>
> +#include <fdtdec.h>
> +#include <i2c.h>
>  #include <power/pmic.h>
>  #include <power/max77686_pmic.h>
>  #include <errno.h>
>
> +DECLARE_GLOBAL_DATA_PTR;
> +
>  int pmic_init(unsigned char bus)
>  {
>         static const char name[] = "MAX77686_PMIC";
> @@ -36,13 +40,40 @@ int pmic_init(unsigned char bus)
>                 return -ENOMEM;
>         }
>
> -       puts("Board PMIC init\n");
> +#ifdef CONFIG_OF_CONTROL
> +       const void *blob = gd->fdt_blob;
> +       int node, parent;
> +
> +       node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_MAX77686_PMIC);
> +       if (node < 0) {
> +               debug("PMIC: No node for PMIC Chip in device tree\n");
> +               debug("node = %d\n", node);
> +               return -1;
> +       }
> +
> +       parent = fdt_parent_offset(blob, node);
> +       if (parent < 0) {
> +               debug("%s: Cannot find node parent\n", __func__);
> +               return -1;
> +       }
> +
> +       p->bus = i2c_get_bus_num_fdt(parent);
> +       if (p->bus < 0) {
> +               debug("%s: Cannot find I2C bus\n", __func__);
> +               return -1;
> +       }
> +       p->hw.i2c.addr = fdtdec_get_int(blob, node, "reg", 9);
> +#else
> +       p->bus = bus;
> +       p->hw.i2c.addr = MAX77686_I2C_ADDR;
> +#endif
> +
>         p->name = name;
>         p->interface = PMIC_I2C;
>         p->number_of_regs = PMIC_NUM_OF_REGS;
> -       p->hw.i2c.addr = MAX77686_I2C_ADDR;
>         p->hw.i2c.tx_num = 1;
> -       p->bus = bus;
> +
> +       puts("Board PMIC init\n");

Can we remove this message? It doesn't seem very important.

>
>         return 0;
>  }
> --
> 1.7.4.4
>

Regards
Simon


More information about the U-Boot mailing list