[U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues

Amarendra Reddy amar.lavanuru at gmail.com
Mon Jan 28 10:25:14 CET 2013


Hi Simon,

Please find the response below.

Thanks & Regards
Amarendra

On 23 January 2013 05:55, Simon Glass <sjg at chromium.org> wrote:

> On Mon, Jan 21, 2013 at 3:43 AM, Amar <amarendra.xt at samsung.com> wrote:
> > This patch enumerates dwmci and set auto stop command during
> > dwmci initialisation.
> > EMMC read/write is not happening in current implementation
> > due to improper fifo size computation. Hence Modified the fifo size
> > computation to resolve EMMC read write issues.
> >
> > Signed-off-by: Amar <amarendra.xt at samsung.com>
>
> Acked-by: Simon Glass <sjg at chromium.org>
>
> (nit below if you resend for other reason)
>
> > ---
> > Changes since V1:
> >         1)Created the macros RX_WMARK_SHIFT and RX_WMARK_MASK in header
> file.
> >
> > Changes since V2:
> >         1)Updation of commit message and resubmition of proper patch set.
> >
> > Changes since V3:
> >         1)Updated to use the macro DWMCI_CTRL_SEND_AS_CCSD instead of
> >         the hard coded value (1 << 10).
> >
> > Changes since V4:
> >         1)Updated the function dwmci_send_cmd() to use get_timer()
> instead
> >         of using mdelay(1).
> >
> >  drivers/mmc/dw_mmc.c | 23 ++++++++++++++++-------
> >  1 file changed, 16 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> > index 4070d4e..391ed93 100644
> > --- a/drivers/mmc/dw_mmc.c
> > +++ b/drivers/mmc/dw_mmc.c
>
> > @@ -323,6 +322,14 @@ static int dwmci_init(struct mmc *mmc)
> >                 return -1;
> >         }
> >
> > +       /* Enumerate at 400KHz */
> > +       dwmci_setup_bus(host, mmc->f_min);
> > +
> > +       /* Set auto stop command */
> > +       ier = dwmci_readl(host, DWMCI_CTRL);
> > +       ier |= DWMCI_CTRL_SEND_AS_CCSD;
> > +       dwmci_writel(host, DWMCI_CTRL, ier);
> > +
> >         dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
> >         dwmci_writel(host, DWMCI_INTMASK, 0);
> >
> > @@ -332,11 +339,13 @@ static int dwmci_init(struct mmc *mmc)
> >         dwmci_writel(host, DWMCI_BMOD, 1);
> >
> >         fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
> > +       fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
> >         if (host->fifoth_val)
> >                 fifoth_val = host->fifoth_val;
>
> should be {} around this I think.
>
Ok will be updated in next version patchset.

>
> > -       else
> > -               fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
> > -                       TX_WMARK(fifo_size/2);
> > +       else {
> > +               fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
> > +                       TX_WMARK(fifo_size / 2);
> > +       }
> >         dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
> >
> >         dwmci_writel(host, DWMCI_CLKENA, 0);
> > --
> > 1.8.0
> >
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>


More information about the U-Boot mailing list