[U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues

Amar amarendra.xt at samsung.com
Mon Jan 21 12:43:51 CET 2013


This patch enumerates dwmci and set auto stop command during
dwmci initialisation.
EMMC read/write is not happening in current implementation
due to improper fifo size computation. Hence Modified the fifo size
computation to resolve EMMC read write issues.

Signed-off-by: Amar <amarendra.xt at samsung.com>
---
Changes since V1:
        1)Created the macros RX_WMARK_SHIFT and RX_WMARK_MASK in header file.

Changes since V2:
        1)Updation of commit message and resubmition of proper patch set.

Changes since V3:
        1)Updated to use the macro DWMCI_CTRL_SEND_AS_CCSD instead of
        the hard coded value (1 << 10).

Changes since V4:
        1)Updated the function dwmci_send_cmd() to use get_timer() instead
        of using mdelay(1).

 drivers/mmc/dw_mmc.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..391ed93 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	unsigned int timeout = 100000;
 	u32 retry = 10000;
 	u32 mask, ctrl;
+	ulong start = get_timer(0);
 
 	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
-		if (timeout == 0) {
+		if (get_timer(start) > timeout) {
 			printf("Timeout on data busy\n");
 			return TIMEOUT;
 		}
-		timeout--;
 	}
 
 	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	if (data)
 		dwmci_prepare_data(host, data);
 
-
 	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
 
 	if (data)
@@ -314,7 +313,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
 	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-	u32 fifo_size, fifoth_val;
+	u32 fifo_size, fifoth_val, ier;
 
 	dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -323,6 +322,14 @@ static int dwmci_init(struct mmc *mmc)
 		return -1;
 	}
 
+	/* Enumerate at 400KHz */
+	dwmci_setup_bus(host, mmc->f_min);
+
+	/* Set auto stop command */
+	ier = dwmci_readl(host, DWMCI_CTRL);
+	ier |= DWMCI_CTRL_SEND_AS_CCSD;
+	dwmci_writel(host, DWMCI_CTRL, ier);
+
 	dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
 	dwmci_writel(host, DWMCI_INTMASK, 0);
 
@@ -332,11 +339,13 @@ static int dwmci_init(struct mmc *mmc)
 	dwmci_writel(host, DWMCI_BMOD, 1);
 
 	fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+	fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
 	if (host->fifoth_val)
 		fifoth_val = host->fifoth_val;
-	else
-		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
-			TX_WMARK(fifo_size/2);
+	else {
+		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+			TX_WMARK(fifo_size / 2);
+	}
 	dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
 
 	dwmci_writel(host, DWMCI_CLKENA, 0);
-- 
1.8.0



More information about the U-Boot mailing list