[U-Boot] [PATCH 3/3 V2] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Rajeshwari Shinde
rajeshwari.s at samsung.com
Tue Jan 22 14:48:09 CET 2013
This patch enables GPIO Command for EXYNOS5.
Function has been added to asm/gpio.h to decode the
input gpio name to gpio number.
example: gpio set gpa00
GPIO_INPUT in cmd_gpio.c has been modified to
GPIO_DIRECTION_INPUT as GPIO_INPUT is alraedy defined in
exynos5 and leading to a error.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
Chnages in V2:
- New patch
arch/arm/include/asm/arch-exynos/gpio.h | 88 +++++++++++++++++++++++++++++++
common/cmd_gpio.c | 6 +-
include/configs/exynos5250-dt.h | 1 +
3 files changed, 92 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index af882dd..66e4a8e 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -657,6 +657,94 @@ static inline unsigned int s5p_gpio_part_max(int nr)
void gpio_cfg_pin(int gpio, int cfg);
void gpio_set_pull(int gpio, int mode);
void gpio_set_drv(int gpio, int mode);
+
+#include <common.h>
+
+static inline int name_to_gpio(const char *name)
+{
+ int num;
+
+ name++;
+
+ if (*name == 'p') {
+ ++name;
+
+ switch (*name) {
+ case 'a':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_A00 + num;
+ break;
+ case 'b':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_B00 + num;
+ break;
+ case 'c':
+ name++;
+ num = simple_strtoul(name, NULL, 10);
+ if (num >= 40)
+ num = GPIO_C40 + (num - 40);
+ else {
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_C00 + num;
+ }
+ break;
+ case 'd':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_D00 + num;
+ break;
+ case 'y':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_Y00 + num;
+ break;
+ case 'x':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_X00 + num;
+ break;
+ case 'e':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_E00 + num;
+ break;
+ case 'f':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_F00 + num;
+ break;
+ case 'g':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_G00 + num;
+ break;
+ case 'h':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_H00 + num;
+ break;
+ case 'v':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_V00 + num;
+ break;
+ case 'z':
+ name++;
+ num = simple_strtoul(name, NULL, 8);
+ num = GPIO_Z0 + num;
+ break;
+ default:
+ return -1;
+ }
+ } else
+ return -1;
+
+ return num;
+}
+
+#define name_to_gpio(n) name_to_gpio(n)
#endif
/* Pin configurations */
diff --git a/common/cmd_gpio.c b/common/cmd_gpio.c
index 47eee89..450e6d1 100644
--- a/common/cmd_gpio.c
+++ b/common/cmd_gpio.c
@@ -16,7 +16,7 @@
#endif
enum gpio_cmd {
- GPIO_INPUT,
+ GPIO_DIRECTION_INPUT,
GPIO_SET,
GPIO_CLEAR,
GPIO_TOGGLE,
@@ -44,7 +44,7 @@ static int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
/* parse the behavior */
switch (*str_cmd) {
- case 'i': sub_cmd = GPIO_INPUT; break;
+ case 'i': sub_cmd = GPIO_DIRECTION_INPUT; break;
case 's': sub_cmd = GPIO_SET; break;
case 'c': sub_cmd = GPIO_CLEAR; break;
case 't': sub_cmd = GPIO_TOGGLE; break;
@@ -63,7 +63,7 @@ static int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
/* finally, let's do it: set direction and exec command */
- if (sub_cmd == GPIO_INPUT) {
+ if (sub_cmd == GPIO_DIRECTION_INPUT) {
gpio_direction_input(gpio);
value = gpio_get_value(gpio);
} else {
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 7b9c393..b20b8f2 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -113,6 +113,7 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_NET
+#define CONFIG_CMD_GPIO
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
--
1.7.4.4
More information about the U-Boot
mailing list