[U-Boot] [PATCH V3 0/9] separate miiphy from ethernet

[Troy Kisky]

On 10/22/2012 7:40 PM, Troy Kisky wrote:
> This series tries to separate the mii regsisters
> from the ethernet registers as suggested by
> Andy Fleming. Then, mx6qsabrelite is changed
> to find the phy address from the possibles 4-7.
>
> The V3 series is very different from V2.
>
> Troy Kisky (9):
>    doc/README.fec_mxc: add documentation
>    net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
>    net: fec_mxc: change fec_mii_setspeed parameter
>    net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
>    phy: add phy_find_by_mask/phy_connect_dev
>    net: fec_mxc: use fec_set_dev_name to set name
>    net: fec_mxc: only call phy_connect in fec_probe
>    net: fec_mxc: get phydev before fec_probe
>    mx6qsabrelite: search mii phy address 4-7
>
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   24 +++-
>   doc/README.fec_mxc                            |   27 ++++
>   drivers/net/fec_mxc.c                         |  164 ++++++++++++++-----------
>   drivers/net/fec_mxc.h                         |    2 +-
>   drivers/net/phy/phy.c                         |  128 +++++++++++--------
>   include/configs/m28evk.h                      |    1 -
>   include/configs/mx28evk.h                     |    1 -
>   include/configs/sc_sps_1.h                    |    1 -
>   include/netdev.h                              |    7 ++
>   include/phy.h                                 |    3 +
>   10 files changed, 227 insertions(+), 131 deletions(-)
>   create mode 100644 doc/README.fec_mxc
>
Ping on this series....

Is there anything I need to fix?

Thanks
Troy