[U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet

Stefano Babic sbabic at denx.de
Tue Jan 15 16:23:27 CET 2013


On 15/01/2013 13:07, Fabio Estevam wrote:
> Currently booting from internal mode is not supported in U-boot for mx35, so 
> remove it from the list of supported SoCs.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  doc/README.imximage |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/doc/README.imximage b/doc/README.imximage
> index 073e3fc..5f4d277 100644
> --- a/doc/README.imximage
> +++ b/doc/README.imximage
> @@ -3,7 +3,7 @@ Imximage Boot Image generation using mkimage
>  ---------------------------------------------
>  
>  This document describes how to set up a U-Boot image that can be booted
> -by Freescale MX25, MX35, MX51, MX53 and MX6 processors via internal boot
> +by Freescale MX25, MX51, MX53 and MX6 processors via internal boot
>  mode.
>  


mmmhhh...I know there are not a lot of examples (only one), but I pushed
the woodburn board that boots from SD Card using internal boot mode and SPL.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list