[U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
albert.u.boot at aribaud.net
Tue Jul 1 07:51:15 CEST 2014
Hi Stefano,
On Thu, 26 Jun 2014 10:25:19 +0200, Stefano Babic <sbabic at denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
>
> net/designware: Make DMA burst length configurable and reduce by
> default (2014-05-25 17:23:58 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 3f4c01d9f9d38e383f004dcd06c0d5661f2a57e0:
>
> mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD (2014-06-26 10:17:19 +0200)
>
> ----------------------------------------------------------------
> Eric Nelson (1):
> serial_mxc: disable new features of autobaud detection
>
> Fabio Estevam (10):
> mx6sabreauto: Add the mx6dual-lite variant
> mx6sabred: Add PFUZE100 PMIC support
> mx25pdk: Add generic board support
> mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
> embestmx6boards: Fix CONFIG_CONSOLE_DEV
> embestmx6boards: Fix the dtb file name for riotboard
> mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
> mx28evk: Add a target for SPI NOR boot
> mx28evk: Add documentation on how to boot from SPI NOR
> mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD
>
> Marek Vasut (1):
> arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
>
> Masahiro Yamada (1):
> spl: consolidate arch/arm/include/asm/arch-*/spl.h
>
> Shawn Guo (1):
> mx6: drop ARM errata 742230
>
> Stefano Babic (3):
> MX25: fix build due to missing sys_proto.h
> imx: correct HAB status for new chip TO
> vf610: fix build due to missing sys_proto.h
>
> Tim Harvey (12):
> spl: nand: add support for mxs nand
> mx6: add common SPL configuration
> mx6: add boot device support for SPL
> imx: add comments and remove unused struct fields
> mx6: add structs for mmdc and ddr iomux registers
> mx6: add mmdc configuration for MX6Q/MX6DL
> imx: iomux: add macros to setup iomux for multiple SoC types
> imx: ventana: split read_eeprom into standalone file
> imx: ventana: auto-configure for IMX6Q vs IMX6DL
> imx: ventana: switch to SPL
> dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
> imx: sata: return failure if not IMX6Q/IMX6D
>
> arch/arm/cpu/arm720t/tegra-common/spl.c | 2 +-
> arch/arm/cpu/armv7/mx6/Makefile | 1 +
> arch/arm/cpu/armv7/mx6/ddr.c | 490 +++++++++++++++++++++++
> arch/arm/cpu/armv7/mx6/hab.c | 73 +++-
> arch/arm/imx-common/Makefile | 1 +
> arch/arm/imx-common/cpu.c | 16 +-
> arch/arm/imx-common/iomux-v3.c | 18 +-
> arch/arm/imx-common/sata.c | 7 +-
> arch/arm/imx-common/spl.c | 81 ++++
> arch/arm/include/asm/arch-at91/spl.h | 24 --
> arch/arm/include/asm/arch-davinci/spl.h | 16 -
> arch/arm/include/asm/arch-mx35/spl.h | 22 -
> arch/arm/include/asm/arch-mx5/spl.h | 13 -
> arch/arm/include/asm/arch-mx6/hab.h | 17 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx6/iomux.h | 2 +-
> arch/arm/include/asm/arch-mx6/mx6-ddr.h | 231 +++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +-
> arch/arm/include/asm/arch-tegra114/spl.h | 22 -
> arch/arm/include/asm/arch-tegra124/spl.h | 13 -
> arch/arm/include/asm/arch-tegra20/spl.h | 12 -
> arch/arm/include/asm/arch-tegra30/spl.h | 12 -
> arch/arm/include/asm/imx-common/iomux-v3.h | 25 ++
> arch/arm/include/asm/spl.h | 20 +
> board/denx/m53evk/m53evk.c | 2 +-
> board/freescale/mx28evk/README | 22 +-
> board/freescale/mx6qsabreauto/mx6dl.cfg | 130 ++++++
> board/freescale/mx6sabresd/mx6sabresd.c | 84 ++++
> board/gateworks/gw_ventana/Makefile | 3 +-
> board/gateworks/gw_ventana/README | 92 +++--
> board/gateworks/gw_ventana/eeprom.c | 89 +++++
> board/gateworks/gw_ventana/gw_ventana.c | 597
> +++++++++++++++-------------
> board/gateworks/gw_ventana/gw_ventana.cfg | 15 -
> board/gateworks/gw_ventana/gw_ventana_spl.c | 419 +++++++++++++++++++
> board/gateworks/gw_ventana/ventana_eeprom.h | 11 +
> boards.cfg | 8 +-
> doc/README.mxs | 26 ++
> drivers/block/dwc_ahsata.c | 5 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mxs_nand_spl.c | 231 +++++++++++
> drivers/serial/serial_mxc.c | 4 +-
> include/configs/embestmx6boards.h | 4 +-
> include/configs/gw_ventana.h | 11 +
> include/configs/imx6_spl.h | 71 ++++
> include/configs/m53evk.h | 1 +
> include/configs/mx28evk.h | 5 +-
> include/configs/mx6_common.h | 1 -
> include/configs/mx6qsabreauto.h | 4 +
> include/configs/mx6sabresd.h | 12 +
> include/power/pfuze100_pmic.h | 4 +
> 50 files changed, 2473 insertions(+), 503 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
> create mode 100644 arch/arm/imx-common/spl.c
> delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
> delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
> delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
> delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
> delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
> delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
> delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
> delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
> create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
> create mode 100644 board/gateworks/gw_ventana/eeprom.c
> create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
> create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
> create mode 100644 include/configs/imx6_spl.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list