July 2014 Archives by author
Starting: Tue Jul 1 00:44:09 CEST 2014
Ending: Thu Jul 31 23:58:00 CEST 2014
Messages: 2233
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] SPL broken on i.mx31 platforms
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw
Albert ARIBAUD
- [U-Boot] SPL broken on i.mx31 platforms
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v5] arm: Add support for semihosting for armv8 fastmodel targets.
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support
Albert ARIBAUD
- [U-Boot] SPL broken on i.mx31 platforms
Albert ARIBAUD
- [U-Boot] SPL broken on i.mx31 platforms
Albert ARIBAUD
- [U-Boot] [Patch v9 1/5] Added 64-bit MMIO accessors for ARMv8
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: cache_v7: use __weak
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: cache_v7: use __weak
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id
Albert ARIBAUD
- [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings
Albert ARIBAUD
- [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)
Albert ARIBAUD
- [U-Boot] [PATCH] arm: Fix armv8 compilation error
Albert ARIBAUD
- [U-Boot] [PATCH v2] gpio: spear_gpio: Fix gpio_set_value() implementation
Albert ARIBAUD
- [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support
Albert ARIBAUD
- [U-Boot] [PATCH v5 1/2] watchdog/denali: Adding DesignWare watchdog driver support
Albert ARIBAUD
- [U-Boot] [PATCH v5 2/2] socfpga: Adding DesignWare watchdog support
Albert ARIBAUD
- [U-Boot] [PATCH v8] socfpga: Adding Scan Manager driver
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2] socfpga: Relocate arch common functions away from board
Albert ARIBAUD
- [U-Boot] [PATCH] arm:board:h2200: Add CONFIG_SYS_GENERIC_BOARD
Albert ARIBAUD
- [U-Boot] [PATCH] arm, calimain: Add CONFIG_SYS_GENERIC_BOARD
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: rpi_b: enable GENERIC_BOARD
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: switch to generic board
Albert ARIBAUD
- [U-Boot] [PATCH v2] socfpga: Relocate arch common functions away from board
Albert ARIBAUD
- [U-Boot] [PATCH] arm: spl: fix include guard
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] arm: Fix armv8 compilation error
Albert ARIBAUD
- [U-Boot] [PATCH] ARM:asm:io.h use static inline
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - please hold on
Albert ARIBAUD
- [U-Boot] [PATCH] ARM:asm:io.h use static inline
Albert ARIBAUD
- [U-Boot] [PATCH] ARM:asm:io.h use static inline
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master - can be applied
Albert ARIBAUD
- [U-Boot] Giving control to standalone app.
Albert ARIBAUD
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Albert ARIBAUD
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Albert ARIBAUD
- [U-Boot] [GIT PULL] Zynq patches
Albert ARIBAUD
- [U-Boot] Please pull u-boot-sunxi.git/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH v5 00/11] ARMv7: add PSCI support to U-Boot
Albert ARIBAUD
- [U-Boot] DM, Kconfig and clang changes
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings
Stefan Agner
- [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support
Stefan Agner
- [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support
Stefan Agner
- [U-Boot] Newbie question: What are uImage and initrd?
David Aldrich
- [U-Boot] Loading nvram with U-Boot via the serial port
Alex
- [U-Boot] Removing an environment variables entries in U-Boot
Alex
- [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support
AlisonWang
- [U-Boot] uboot-env.bin
Naitik Amin
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
Pantelis Antoniou
- [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver
Pantelis Antoniou
- [U-Boot] Antw: [PATCH v11 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme
Steffen Arendt
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Roman B.
- [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Roman B.
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Roman B.
- [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support
Roman B.
- [U-Boot] U-Boot: Enhancement request to get flash device specific information
HEERA NAND BHAGTANI
- [U-Boot] : Enhancement request to get flash device specific information
HEERA NAND BHAGTANI
- [U-Boot] U-Boot: Enhancement request to get flash device specific information
HEERA NAND BHAGTANI
- [U-Boot] [PATCH 1/2] spi: ST33ZP24 SPI TPM driver
Jean-Luc BLANC
- [U-Boot] [PATCH 2/2] i2c: ST33ZP24 I2C TPM driver
Jean-Luc BLANC
- [U-Boot] SPL broken on i.mx31 platforms
Stefano Babic
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Stefano Babic
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Stefano Babic
- [U-Boot] [PATCH v5 4/4] mx6sx: Add initial support for mx6sxsabresd board
Stefano Babic
- [U-Boot] [PATCH v5 3/4] mx6: clock: Do not enable sata and ipu clocks
Stefano Babic
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Stefano Babic
- [U-Boot] [PATCH v5 2/4] mx6sx: Add pin definitions
Stefano Babic
- [U-Boot] [PATCH v4] mx6: add support of multi-processor command
Stefano Babic
- [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options
Stefano Babic
- [U-Boot] [PATCH] MX6: Correct calculation of PLL_SYS
Stefano Babic
- [U-Boot] [PATCH] mx6: soc: Update the comments of set_ldo_voltage()
Stefano Babic
- [U-Boot] [PULL]: small fixes from u-boot-imx
Stefano Babic
- [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support
Stefano Babic
- [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support
Stefano Babic
- [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox
Stefano Babic
- [U-Boot] [PATCH v1 1/4] arm, imx6: add mxc_iomux_set_gpr_register function
Stefano Babic
- [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()
Stefano Babic
- [U-Boot] [PATCH v1 4/4] arm, imx6: add aristainetos board
Stefano Babic
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
Stefano Babic
- [U-Boot] [PATCH v2 2/5] imx6: add gpr2 usb_otg_id iomux select control define
Stefano Babic
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Stefano Babic
- [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()
Stefano Babic
- [U-Boot] [PATCH v2 5/5] arm, imx6: add aristainetos board
Stefano Babic
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Stefano Babic
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Stefano Babic
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
Stefano Babic
- [U-Boot] i.MX tree out of sync
Stefano Babic
- [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6
Stefano Babic
- [U-Boot] [PATCH v3 6/6] arm, imx6: add aristainetos board
Stefano Babic
- [U-Boot] [PATCH] embestmx6boards: convert to generic board
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6: soc: Do not apply the PFD erratum for mx6solox
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6sxsabresd: Add PFUZE100 PMIC support
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox
Stefano Babic
- [U-Boot] [PATCH] arm: mxs: Scrub useless ifdef
Stefano Babic
- [U-Boot] [PATCH v4 0/6] arm, imx6: add aristainetos board support
Stefano Babic
- [U-Boot] [PATCH v4] Add TQ Systems TQMa6 board support
Stefano Babic
- [U-Boot] [PATCH v6] mx6: add support of multi-processor command
Stefano Babic
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Stefano Babic
- [U-Boot] SPL and an LCD splash screen on AM335x
Stefano Babic
- [U-Boot] Implementing spl_start_uboot() for directly booting linux
Stefano Babic
- [U-Boot] [PATCH 1/2] usb: host: xhci: make sure to power up PHY
Felipe Balbi
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Felipe Balbi
- [U-Boot] [PATCH 1/2] usb: host: xhci: make sure to power up PHY
Felipe Balbi
- [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Felipe Balbi
- [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Felipe Balbi
- [U-Boot] [PATCH] doc: README.android-fastboot: Add note about vendor ID
Clifton Barnes
- [U-Boot] SPL and an LCD splash screen on AM335x
Heshsham Abdul Basit
- [U-Boot] Implementing spl_start_uboot() for directly booting linux
Heshsham Abdul Basit
- [U-Boot] Implementing spl_start_uboot() for directly booting linux
Heshsham Abdul Basit
- [U-Boot] [PATCH] tricorder: convert to generic board
Andreas Bießmann
- [U-Boot] Antw: [PATCH v11 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme
Andreas Bießmann
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Andreas Bießmann
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Andreas Bießmann
- [U-Boot] CPU Wachtog for P2041
Boschung, Rainer
- [U-Boot] [PATCH] powerpc/83xx: add support for kmtepr2 board
Holger Brunck
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Roman Byshko
- [U-Boot] [PATCH 1/5] sunxi: add defines to control USB Host clocks/resets
Roman Byshko
- [U-Boot] [PATCH 2/5] sunxi: add USB EHCI driver
Roman Byshko
- [U-Boot] [PATCH 3/5] sunxi: add USB options to configs
Roman Byshko
- [U-Boot] [PATCH 4/5] sun7i: add USB EHCI configuration
Roman Byshko
- [U-Boot] [PATCH 5/5] sun7i: cubietruck: enable USB EHCI
Roman Byshko
- [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Roman Byshko
- [U-Boot] [PATCH v2 1/5] sunxi: add defines to control USB Host clocks/resets
Roman Byshko
- [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver
Roman Byshko
- [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs
Roman Byshko
- [U-Boot] [PATCH v2 4/5] sun7i: add USB EHCI configuration
Roman Byshko
- [U-Boot] [PATCH v2 5/5] sun7i: cubietruck: enable USB EHCI
Roman Byshko
- [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support
Roman Byshko
- [U-Boot] [PATCH v3 1/5] sunxi: add defines to control USB Host clocks/resets
Roman Byshko
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Roman Byshko
- [U-Boot] [PATCH v3 3/5] sunxi: add general USB settings
Roman Byshko
- [U-Boot] [PATCH v3 4/5] sun7i: add USB EHCI settings
Roman Byshko
- [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI
Roman Byshko
- [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver
Roman Byshko
- [U-Boot] [linux-sunxi] Re: [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Julian Calaby
- [U-Boot] [linux-sunxi] Re: [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Julian Calaby
- [U-Boot] Requesting a custodian tree for sunxi (Allwinner) maintenance
Ian Campbell
- [U-Boot] [PATCH] git-mailrc: Add sunxi custodians.
Ian Campbell
- [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too
Ian Campbell
- [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms
Ian Campbell
- [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms
Ian Campbell
- [U-Boot] [PATCH v2 1/5] mvtwsi: convert to CONFIG_SYS_I2C framework
Ian Campbell
- [PATCH] sunxi: Avoid unused variable warning.
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/next
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/next
Ian Campbell
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Ian Campbell
- [U-Boot] [PATCH 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Ian Campbell
- [U-Boot] [PATCH v5 00/11] ARMv7: add PSCI support to U-Boot
Ian Campbell
- [U-Boot] [PATCH v5 01/11] ARM: HYP/non-sec: move switch to non-sec to the last boot phase
Ian Campbell
- [U-Boot] [PATCH v5 02/11] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
Ian Campbell
- [U-Boot] [PATCH v5 03/11] ARM: non-sec: reset CNTVOFF to zero
Ian Campbell
- [U-Boot] [PATCH v5 04/11] ARM: add missing HYP mode constant
Ian Campbell
- [U-Boot] [PATCH v5 05/11] ARM: HYP/non-sec: add separate section for secure code
Ian Campbell
- [U-Boot] [PATCH v5 06/11] ARM: HYP/non-sec: allow relocation to secure RAM
Ian Campbell
- [U-Boot] [PATCH v5 07/11] ARM: HYP/non-sec: add generic ARMv7 PSCI code
Ian Campbell
- [U-Boot] [PATCH v5 08/11] ARM: HYP/non-sec: add the option for a second-stage monitor
Ian Campbell
- [U-Boot] [PATCH v5 09/11] ARM: convert arch_fixup_memory_node to a generic FDT fixup function
Ian Campbell
- [U-Boot] [PATCH v5 10/11] ARM: HYP/non-sec/PSCI: emit DT nodes
Ian Campbell
- [U-Boot] [PATCH v5 11/11] ARM: HYP/non-sec: remove MIDR check to validate CBAR
Ian Campbell
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Ian Campbell
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Ian Campbell
- [U-Boot] [i2c] Pull request
Ian Campbell
- [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [i2c] Pull request
Ian Campbell
- [U-Boot] [PATCH v2 1/5] sunxi: add defines to control USB Host clocks/resets
Ian Campbell
- [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs
Ian Campbell
- [U-Boot] [PATCH v2 4/5] sun7i: add USB EHCI configuration
Ian Campbell
- [U-Boot] [PATCH v2 5/5] sun7i: cubietruck: enable USB EHCI
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/next
Ian Campbell
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Ian Campbell
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Ian Campbell
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Ian Campbell
- [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/master
Ian Campbell
- [U-Boot] [PATCH v3 0/3] sunxi: AHCI support
Ian Campbell
- [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms
Ian Campbell
- [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too
Ian Campbell
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/master
Ian Campbell
- [U-Boot] [PATCH v5 0/2] PSCI backend for sun7i
Ian Campbell
- [U-Boot] [PATCH v5 1/2] sunxi: HYP/non-sec: add sun7i PSCI backend
Ian Campbell
- [U-Boot] [PATCH v5 2/2] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs
Ian Campbell
- [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms
Ian Campbell
- [U-Boot] [PATCH] board_r: Add missing return to initr_doc
Ian Campbell
- [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too
Ian Campbell
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Ian Campbell
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Ian Campbell
- [U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function
Ian Campbell
- [U-Boot] [PATCH 02/14] sunxi: dram: Remove broken super-standby remnants
Ian Campbell
- [U-Boot] [PATCH 03/14] sunxi: dram: Respect the DDR3 reset timing requirements
Ian Campbell
- [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling
Ian Campbell
- [U-Boot] [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration
Ian Campbell
- [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
Ian Campbell
- [U-Boot] [PATCH 07/14] sunxi: dram: Use divisor P=1 for PLL5
Ian Campbell
- [U-Boot] [PATCH 08/14] sunxi: dram: Improve DQS gate data training error handling
Ian Campbell
- [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
Ian Campbell
- [U-Boot] [PATCH 11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13)
Ian Campbell
- [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
Ian Campbell
- [U-Boot] [PATCH 13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed
Ian Campbell
- [U-Boot] [PATCH 14/14] sunxi: dram: Autodetect DDR3 bus width and density
Ian Campbell
- [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes
Ian Campbell
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Ian Campbell
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Ian Campbell
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Ian Campbell
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Ian Campbell
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Ian Campbell
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Ian Campbell
- [U-Boot] [linux-sunxi] Re: [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Ian Campbell
- [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4
Ian Campbell
- [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4
Ian Campbell
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Ian Campbell
- [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller
Ian Campbell
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Ian Campbell
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Ian Campbell
- [U-Boot] [PATCH] board_r: Add missing return to initr_doc
Ian Campbell
- [U-Boot] [PATCH v2] board_r: Add missing return to initr_doc
Ian Campbell
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Ian Campbell
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Ian Campbell
- [U-Boot] u-boot command for standalone application
Ian Campbell
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Ian Campbell
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Ian Campbell
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Ian Campbell
- [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling
Ian Campbell
- [U-Boot] [linux-sunxi] Re: [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration
Ian Campbell
- [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
Ian Campbell
- [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
Ian Campbell
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI
Ian Campbell
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Ian Campbell
- [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller
Ian Campbell
- [U-Boot] [PATCH 1/7] sun4i: add USB EHCI settings
Ian Campbell
- [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings
Ian Campbell
- [U-Boot] [PATCH 3/7] sunxi: Enable EHCI on various sunxi boards
Ian Campbell
- [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Ian Campbell
- [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards
Ian Campbell
- [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Ian Campbell
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Ian Campbell
- [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards
Ian Campbell
- [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds
Ian Campbell
- [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds
Ian Campbell
- [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds
Ian Campbell
- [U-Boot] [PATCH] sun7i: Add bananapi board
Ian Campbell
- [U-Boot] [PATCH] sun7i: Add bananapi board
Ian Campbell
- [U-Boot] Please pull u-boot-sunxi.git/master
Ian Campbell
- [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd
Ian Campbell
- [U-Boot] Quick guide to Kconfig
Ian Campbell
- [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings
Ash Charles
- [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform
Ash Charles
- [U-Boot] [PATCH v4 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
Jaehoon Chung
- [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.
Jaehoon Chung
- [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types
Jaehoon Chung
- [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Jaehoon Chung
- [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.
Jaehoon Chung
- [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Jaehoon Chung
- [U-Boot] socfpga: initialize MMC
Jaehoon Chung
- [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Jaehoon Chung
- [U-Boot] Please fix warning of Exynos
Jaehoon Chung
- [U-Boot] ARM: omap: Looking to dynamically setup ECC and nand settings during boot
Jon Cormier
- [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot
Jon Cormier
- [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot
Jon Cormier
- [U-Boot] [PATCH v3] ARM: tegra: Disable VPR
Alexandre Courbot
- [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.
Diana Craciun
- [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.
Diana Craciun
- [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7
Diana Craciun
- [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region
Diana Craciun
- [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.
Diana Craciun
- [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7
Diana Craciun
- [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.
Diana Craciun
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Wolfgang Denk
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2014.07-rc4 released
Wolfgang Denk
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Wolfgang Denk
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Wolfgang Denk
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Wolfgang Denk
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Wolfgang Denk
- [U-Boot] [PATCH]fix yaffs2 with inband-tags option, mtd_block_markbad & mtd_block_isbad parameter error.
Wolfgang Denk
- [U-Boot] [Question] Is it safe to use 'set verify n' ?
Wolfgang Denk
- [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Wolfgang Denk
- [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Wolfgang Denk
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Wolfgang Denk
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Wolfgang Denk
- [U-Boot] U-Boot: Enhancement request to get flash device specific information
Wolfgang Denk
- [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak
Wolfgang Denk
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Wolfgang Denk
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Wolfgang Denk
- [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak
Wolfgang Denk
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Wolfgang Denk
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2014.07 released
Wolfgang Denk
- [U-Boot] DM, Kconfig and clang changes
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2014.07 released
Wolfgang Denk
- [U-Boot] git pull fails ?!
Wolfgang Denk
- [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6
Wolfgang Denk
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Wolfgang Denk
- [U-Boot] socfpga: initialize MMC
Wolfgang Denk
- [U-Boot] socfpga: initialize MMC
Wolfgang Denk
- [U-Boot] socfpga: initialize MMC
Wolfgang Denk
- [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM
Wolfgang Denk
- [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms
Wolfgang Denk
- [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code
Wolfgang Denk
- [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards
Wolfgang Denk
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Wolfgang Denk
- [U-Boot] socfpga: initialize MMC
Wolfgang Denk
- [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support
Wolfgang Denk
- [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers
Wolfgang Denk
- [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers
Wolfgang Denk
- [U-Boot] [PATCH] boards.cfg: re-claim ownership for TQM8xx boards
Wolfgang Denk
- [U-Boot] dfu download issue with ci_udc
Wolfgang Denk
- [U-Boot] u-boot command for standalone application
Wolfgang Denk
- [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check
Wolfgang Denk
- [U-Boot] u-boot command for standalone application
Wolfgang Denk
- [U-Boot] u-boot command for standalone application
Wolfgang Denk
- [U-Boot] u-boot command for standalone application
Wolfgang Denk
- [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: enable mtdparts for nor flash
Wolfgang Denk
- [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards
Wolfgang Denk
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] uboot/odroid test report
Daniel Drake
- [U-Boot] ODROID dynamic memory initialization
Daniel Drake
- [U-Boot] ODROID dynamic memory initialization
Daniel Drake
- [U-Boot] FSL eSPI driver is a mess, hack attached.
Eliot Dudley
- [U-Boot] About verify uboot
Duxiaoqiang
- [U-Boot] Can not boot Linux with new FIT image on ARMv8
Duxiaoqiang
- [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality
Dirk Eibach
- [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality
Dirk Eibach
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
Dirk Eibach
- [U-Boot] [PATCH v1 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
Dirk Eibach
- [U-Boot] SPL broken on i.mx31 platforms
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Fabio Estevam
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6: soc: Do not apply the PFD erratum for mx6solox
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sxsabresd: Add PFUZE100 PMIC support
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox
Fabio Estevam
- [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()
Fabio Estevam
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Fabio Estevam
- [U-Boot] [PATCH] mmc: sdhci: Fixed timeout for sdhci_send_command()
Andy Fleming
- [U-Boot] [PATCH] Change Andy Fleming's email address
Andy Fleming
- [U-Boot] [PATCH RFC 1/3] spi:fsl_spi:Add compatibility for fsl-qspi and fsl-dspi modules driver
Chao Fu
- [U-Boot] [PATCH RFC 2/3] arm:vf610:Add SPI bus num in SOC level for SPI compatibility
Chao Fu
- [U-Boot] [PATCH RFC 3/3] arm:vf610-twr:Add fsl-spi-interface config and board info
Chao Fu
- [U-Boot] Programming PHY firmware over MDIO
Danny Gale
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
Simon Glass
- [U-Boot] [U-boot] Does u-boot.bin only include a data section?
Simon Glass
- [U-Boot] U-Boot: Enhancement request to get flash device specific information
Simon Glass
- [U-Boot] [Question] Any plan to refactor Generic Board Framework?
Simon Glass
- [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation
Simon Glass
- [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time
Simon Glass
- [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode
Simon Glass
- [U-Boot] [PATCH 4/6] exynos5: Enable data cashe
Simon Glass
- [U-Boot] [PATCH 5/6] cros_ec: power: Add a tunnelled version of the tps65090 driver
Simon Glass
- [U-Boot] [PATCH 6/6] cros_ec: exynos: Use the correct tps65090 driver in each case
Simon Glass
- [U-Boot] [PATCH] buildman: fix toolchain priority_list
Simon Glass
- [U-Boot] [PATCH] buildman: fix to display warning message for missing [toolchain] section
Simon Glass
- [U-Boot] [PATCH] cosmetic: doc: update README.generic-board
Simon Glass
- [U-Boot] [PATCH RFC 1/3] spi:fsl_spi:Add compatibility for fsl-qspi and fsl-dspi modules driver
Simon Glass
- [U-Boot] [PATCH] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists
Simon Glass
- [U-Boot] [PATCH RFC 0/2] usb: host: Add a wrapper layer for mutiple host support
Simon Glass
- [U-Boot] m68k: Fix warnings with gcc 4.6
Simon Glass
- [U-Boot] [PATCH v2 0/9] Add a pre-relocation malloc() implementation
Simon Glass
- [U-Boot] [PATCH v2 1/9] Remove form-feeds from dlmalloc.c
Simon Glass
- [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v2 3/9] sandbox: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v2 4/9] Add a simple malloc() implementation for pre-relocation
Simon Glass
- [U-Boot] [PATCH v2 5/9] arm: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v2 6/9] exynos: Enable pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v2 7/9] sandbox: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v2 8/9] sandbox: config: Enable pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v2 9/9] sandbox: Always enable malloc debug
Simon Glass
- [U-Boot] Please pull u-boot-x86.git branch tom
Simon Glass
- [U-Boot] CONFIG_SYS_GENERIC_BOARD status
Simon Glass
- [U-Boot] [PATCH] common: board_f: cosmetic use __weak for leds
Simon Glass
- [U-Boot] [PATCH] common: main.c: make show_boot_progress __weak
Simon Glass
- [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v2 0/29] Add additional core driver model features
Simon Glass
- [U-Boot] [PATCH v2 01/29] dm: gpio: Don't use the driver model uclass for SPL
Simon Glass
- [U-Boot] [PATCH v2 02/29] dm: Use an explicit expect value in core tests
Simon Glass
- [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls
Simon Glass
- [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods
Simon Glass
- [U-Boot] [PATCH v2 05/29] dm: Make sure that the root device is probed
Simon Glass
- [U-Boot] [PATCH v2 06/29] dm: Provide a way to shut down driver model
Simon Glass
- [U-Boot] [PATCH v2 07/29] sandbox: Remove all drivers before exit
Simon Glass
- [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'
Simon Glass
- [U-Boot] [PATCH v2 09/29] dm: Support driver model prior to relocation
Simon Glass
- [U-Boot] [PATCH v2 10/29] stdio: Provide functions to add/remove devices using stdio_dev
Simon Glass
- [U-Boot] [PATCH v2 11/29] console: Remove vprintf() optimisation for sandbox
Simon Glass
- [U-Boot] [PATCH v2 12/29] Add a flag indicating when the serial console is ready
Simon Glass
- [U-Boot] [PATCH v2 13/29] dm: Move uclass error checking/probing into a function
Simon Glass
- [U-Boot] [PATCH v2 14/29] fdt: Add a function to get the alias sequence of a node
Simon Glass
- [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function
Simon Glass
- [U-Boot] [PATCH v2 16/29] dm: Avoid activating devices in 'dm uclass' command
Simon Glass
- [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering
Simon Glass
- [U-Boot] [PATCH v2 18/29] dm: Display the sequence number for each device
Simon Glass
- [U-Boot] [PATCH v2 19/29] dm: Allow a device to be found by its FDT offset
Simon Glass
- [U-Boot] [PATCH v2 20/29] dm: Avoid accessing uclasses before they are ready
Simon Glass
- [U-Boot] [PATCH v2 21/29] fdt: Add a function to get the node offset of an alias
Simon Glass
- [U-Boot] [PATCH v2 22/29] dm: Tidy up some header file comments
Simon Glass
- [U-Boot] [PATCH v2 23/29] dm: Provide a function to scan child FDT nodes
Simon Glass
- [U-Boot] [PATCH v2 24/29] dm: Add functions to access a device's children
Simon Glass
- [U-Boot] [PATCH v2 25/29] dm: Introduce per-child data for devices
Simon Glass
- [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Simon Glass
- [U-Boot] [PATCH v2 27/29] dm: Improve errors and warnings in lists_bind_fdt()
Simon Glass
- [U-Boot] [PATCH v2 28/29] dm: Add dm_scan_other() to locate board-specific devices
Simon Glass
- [U-Boot] [PATCH v2 29/29] dm: Give the demo uclass a name
Simon Glass
- [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu
Simon Glass
- [U-Boot] [PATCH V3 6/9] ARM: exynos: Add missing declaration for gpio_direction_input
Simon Glass
- [U-Boot] [PATCH V3 9/9] CONFIGS: peach-pit: Enable display for peach_pit board
Simon Glass
- [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Simon Glass
- [U-Boot] [PATCH v3 1/9] Remove form-feeds from dlmalloc.c
Simon Glass
- [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v3 3/9] sandbox: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v3 4/9] Add a simple malloc() implementation for pre-relocation
Simon Glass
- [U-Boot] [PATCH v3 5/9] arm: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 6/9] exynos: Enable pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 7/9] sandbox: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 8/9] sandbox: config: Enable pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 9/9] sandbox: Always enable malloc debug
Simon Glass
- [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function
Simon Glass
- [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods
Simon Glass
- [U-Boot] [RFC PATCH v4 0/11] Enable driver model for GPIOs on Tegra and Exynos
Simon Glass
- [U-Boot] [RFC PATCH v4 01/11] tegra: Convert tegra GPIO driver to use driver model
Simon Glass
- [U-Boot] [RFC PATCH v4 02/11] exynos: Bring in pinctrl dts files from Linux kernel
Simon Glass
- [U-Boot] [RFC PATCH v4 03/11] exynos: dts: Remove unused pinctrl information to save space
Simon Glass
- [U-Boot] [RFC PATCH v4 04/11] exynos: dts: Adjust device tree files for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH v4 05/11] exynos: dts: Convert /include/ to #include
Simon Glass
- [U-Boot] [RFC PATCH v4 06/11] exynos: Tidy up GPIO headers
Simon Glass
- [U-Boot] [RFC PATCH v4 07/11] exynos: Tidy up GPIO defines
Simon Glass
- [U-Boot] [RFC PATCH v4 08/11] exynos: Make sure that GPIOs are requested
Simon Glass
- [U-Boot] [RFC PATCH v4 09/11] dm: gpio: Enhance gpio command to show only active GPIOs
Simon Glass
- [U-Boot] [RFC PATCH v4 10/11] exynos: gpio: Convert to driver model
Simon Glass
- [U-Boot] [RFC PATCH v4 11/11] dm: sandbox: dts: Add a GPIO bank
Simon Glass
- [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls
Simon Glass
- [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass
Simon Glass
- [U-Boot] [PATCH v2 1/9] serial: Set up the 'priv' pointer when creating a serial device
Simon Glass
- [U-Boot] [PATCH v2 2/9] dm: Add a uclass for serial devices
Simon Glass
- [U-Boot] [PATCH v2 3/9] Set up stdio earlier when using driver model
Simon Glass
- [U-Boot] [PATCH v2 4/9] sandbox: Convert serial driver to use driver model
Simon Glass
- [U-Boot] [PATCH v2 5/9] sandbox: serial: Support a coloured console
Simon Glass
- [U-Boot] [PATCH v2 6/9] sandbox: dts: Add a serial console node
Simon Glass
- [U-Boot] [PATCH v2 7/9] dm: exynos: Mark exynos5 console as pre-reloc
Simon Glass
- [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model
Simon Glass
- [U-Boot] [PATCH v2 9/9] dm: Make driver model available before board_init()
Simon Glass
- [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'
Simon Glass
- [U-Boot] [PATCH] buildman: Add -F flag to retry failed builds
Simon Glass
- [U-Boot] DM, Kconfig and clang changes
Simon Glass
- [U-Boot] [PATCH 0/6] Add some missing buildman features and deprecate MAKEALL
Simon Glass
- [U-Boot] [PATCH 1/6] buildman: Add -F flag to retry failed builds
Simon Glass
- [U-Boot] [PATCH 2/6] buildman: Avoid retrying a build if it definitely failed
Simon Glass
- [U-Boot] [PATCH 3/6] buildman: Add -C option to force a reconfigure for each commit
Simon Glass
- [U-Boot] [PATCH 4/6] buildman: Support in-tree builds
Simon Glass
- [U-Boot] [PATCH 5/6] buildman: Add some notes about moving from MAKEALL
Simon Glass
- [U-Boot] [PATCH 6/6] RFC: Deprecate MAKEALL
Simon Glass
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Simon Glass
- [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec
Simon Glass
- [U-Boot] [PATCH 01/25] sandbox: Convert SPI flash emulation to use sf_params
Simon Glass
- [U-Boot] [PATCH 02/25] sandbox: config: Enable all SPI flash chips
Simon Glass
- [U-Boot] [PATCH 03/25] sandbox: dts: Add a SPI device and cros_ec device
Simon Glass
- [U-Boot] [PATCH 04/25] dm: spi: Move cmd device code into its own function
Simon Glass
- [U-Boot] [PATCH 05/25] spi: Add brackets and tidy defines in spi.h
Simon Glass
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
- [U-Boot] [PATCH 07/25] dm: sandbox: Add a SPI emulation uclass
Simon Glass
- [U-Boot] [PATCH 08/25] dm: Remove spi_init() from board_r.c when using driver model
Simon Glass
- [U-Boot] [PATCH 09/25] dm: Add spi.h header to a few files
Simon Glass
- [U-Boot] [PATCH 10/25] dm: spi: Adjust cmd_spi to work with driver model
Simon Glass
- [U-Boot] [PATCH 11/25] dm: sandbox: spi: Move to driver model
Simon Glass
- [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers
Simon Glass
- [U-Boot] [PATCH 13/25] dm: exynos: Convert SPI to driver model
Simon Glass
- [U-Boot] [PATCH 14/25] sf: Add an empty entry to the parameter list
Simon Glass
- [U-Boot] [PATCH 15/25] sf: Tidy up public and private header files
Simon Glass
- [U-Boot] [PATCH 16/25] spi: Use error return value in sf_ops
Simon Glass
- [U-Boot] [PATCH 17/25] dm: sf: Add a uclass for SPI flash
Simon Glass
- [U-Boot] [PATCH 18/25] dm: Convert spi_flash_probe() and 'sf probe' to use driver model
Simon Glass
- [U-Boot] [PATCH 19/25] dm: sf: sandbox: Convert SPI flash driver to driver model
Simon Glass
- [U-Boot] [PATCH 20/25] dm: exynos: config: Use driver model for SPI flash
Simon Glass
- [U-Boot] [PATCH 21/25] dm: spi: Add tests
Simon Glass
- [U-Boot] [PATCH 22/25] dm: sf: Add tests for SPI flash
Simon Glass
- [U-Boot] [PATCH 23/25] dm: cros_ec: Add support for driver model
Simon Glass
- [U-Boot] [PATCH 24/25] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module
Simon Glass
- [U-Boot] [PATCH 25/25] dm: exynos: cros_ec: Move cros_ec_spi to driver model
Simon Glass
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
- [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Simon Glass
- [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Simon Glass
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
- [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too
Simon Glass
- [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering
Simon Glass
- [U-Boot] [PATCH v3] Implement generalised RSA public exponents for verified boot
Simon Glass
- [U-Boot] [PATCH 1/2] spi: ST33ZP24 SPI TPM driver
Simon Glass
- [U-Boot] [PATCH 2/2] i2c: ST33ZP24 I2C TPM driver
Simon Glass
- [U-Boot] WIP for SPI
Simon Glass
- [U-Boot] [PATCH] patman: make "No recipient" checking more tolerant
Simon Glass
- [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make
Simon Glass
- [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make
Simon Glass
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
- [U-Boot] [PATCH] Makefile: replace stat -c %s with wc
Simon Glass
- [U-Boot] Hi, Problem about verify uboot
Simon Glass
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Simon Glass
- [U-Boot] [PATCH] board_r: Add missing return to initr_doc
Simon Glass
- [U-Boot] WIP for SPI
Simon Glass
- [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)
Simon Glass
- [U-Boot] [PATCH 1/8] exynos: Rename -dt config files to -common
Simon Glass
- [U-Boot] [PATCH 2/8] exynos: Move common exynos settings into a common file
Simon Glass
- [U-Boot] [PATCH 3/8] exynos: Move common smdk5420 things to common file
Simon Glass
- [U-Boot] [PATCH 4/8] exynos: config: Move cros_ec and tps65090 out of smdk boards
Simon Glass
- [U-Boot] [PATCH 5/8] config: Move arndale to use common exynos5250 file
Simon Glass
- [U-Boot] [PATCH 6/8] config: Move smdkv310 to use common exynos4 file
Simon Glass
- [U-Boot] [PATCH 7/8] samsung: Move s5p_goni to use exynos-common config
Simon Glass
- [U-Boot] [PATCH 8/8] samsung: Move smdkc100 to use exynos-common config
Simon Glass
- [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v3 5/9] arm: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Simon Glass
- [U-Boot] [PATCH v3 0/29] Add additional core driver model features
Simon Glass
- [U-Boot] [PATCH v3 01/29] dm: gpio: Don't use the driver model uclass for SPL
Simon Glass
- [U-Boot] [PATCH v3 02/29] dm: Use an explicit expect value in core tests
Simon Glass
- [U-Boot] [PATCH v3 03/29] stdio: Remove redundant code around stdio_register() calls
Simon Glass
- [U-Boot] [PATCH v3 04/29] stdio: Pass device pointer to stdio methods
Simon Glass
- [U-Boot] [PATCH v3 05/29] dm: Make sure that the root device is probed
Simon Glass
- [U-Boot] [PATCH v3 06/29] dm: Provide a way to shut down driver model
Simon Glass
- [U-Boot] [PATCH v3 07/29] sandbox: Remove all drivers before exit
Simon Glass
- [U-Boot] [PATCH v3 08/29] dm: Allow drivers to be marked 'before relocation'
Simon Glass
- [U-Boot] [PATCH v3 09/29] dm: Support driver model prior to relocation
Simon Glass
- [U-Boot] [PATCH v3 10/29] stdio: Provide functions to add/remove devices using stdio_dev
Simon Glass
- [U-Boot] [PATCH v3 11/29] console: Remove vprintf() optimisation for sandbox
Simon Glass
- [U-Boot] [PATCH v3 12/29] Add a flag indicating when the serial console is ready
Simon Glass
- [U-Boot] [PATCH v3 13/29] dm: Move uclass error checking/probing into a function
Simon Glass
- [U-Boot] [PATCH v3 14/29] fdt: Add a function to get the alias sequence of a node
Simon Glass
- [U-Boot] [PATCH v3 15/29] dm: Move device display into its own function
Simon Glass
- [U-Boot] [PATCH v3 16/29] dm: Avoid activating devices in 'dm uclass' command
Simon Glass
- [U-Boot] [PATCH v3 17/29] dm: Introduce device sequence numbering
Simon Glass
- [U-Boot] [PATCH v3 18/29] dm: Display the sequence number for each device
Simon Glass
- [U-Boot] [PATCH v3 19/29] dm: Allow a device to be found by its FDT offset
Simon Glass
- [U-Boot] [PATCH v3 20/29] dm: Avoid accessing uclasses before they are ready
Simon Glass
- [U-Boot] [PATCH v3 21/29] fdt: Add a function to get the node offset of an alias
Simon Glass
- [U-Boot] [PATCH v3 22/29] dm: Tidy up some header file comments
Simon Glass
- [U-Boot] [PATCH v3 23/29] dm: Provide a function to scan child FDT nodes
Simon Glass
- [U-Boot] [PATCH v3 24/29] dm: Add functions to access a device's children
Simon Glass
- [U-Boot] [PATCH v3 25/29] dm: Introduce per-child data for devices
Simon Glass
- [U-Boot] [PATCH v3 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Simon Glass
- [U-Boot] [PATCH v3 27/29] dm: Improve errors and warnings in lists_bind_fdt()
Simon Glass
- [U-Boot] [PATCH v3 28/29] dm: Add dm_scan_other() to locate board-specific devices
Simon Glass
- [U-Boot] [PATCH v3 29/29] dm: Give the demo uclass a name
Simon Glass
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Simon Glass
- [U-Boot] [PATCH v2] Makefile: use $(shell ...) for determining file_size
Simon Glass
- [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)
Simon Glass
- [U-Boot] Please pull u-boot-dm.git
Simon Glass
- [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields
Simon Glass
- [U-Boot] [PATCH v2 2/3] MAKEALL: make sure to invoke GNU Make
Simon Glass
- [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig
Simon Glass
- [U-Boot] [PATCH v5 04/15] kconfig: add basic Kconfig files
Simon Glass
- [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig
Simon Glass
- [U-Boot] [PATCH v5 08/15] Add MAINTAINERS files
Simon Glass
- [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: enable DFU too
Simon Glass
- [U-Boot] [PATCH v5 10/15] kconfig: remove mkconfig and boards.cfg
Simon Glass
- [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig
Simon Glass
- [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files
Simon Glass
- [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig
Simon Glass
- [U-Boot] [PATCH v5 14/15] powerpc: remove redundant CPU definition
Simon Glass
- [U-Boot] Please pull u-boot-dm.git
Simon Glass
- [U-Boot] [PATCH v3 01/29] dm: gpio: Don't use the driver model uclass for SPL
Simon Glass
- [U-Boot] [PATCH v3 02/29] dm: Use an explicit expect value in core tests
Simon Glass
- [U-Boot] [PATCH v3 03/29] stdio: Remove redundant code around stdio_register() calls
Simon Glass
- [U-Boot] [PATCH v3 04/29] stdio: Pass device pointer to stdio methods
Simon Glass
- [U-Boot] [PATCH v3 05/29] dm: Make sure that the root device is probed
Simon Glass
- [U-Boot] [PATCH v3 06/29] dm: Provide a way to shut down driver model
Simon Glass
- [U-Boot] [PATCH v3 07/29] sandbox: Remove all drivers before exit
Simon Glass
- [U-Boot] [PATCH v3 08/29] dm: Allow drivers to be marked 'before relocation'
Simon Glass
- [U-Boot] [PATCH v3 09/29] dm: Support driver model prior to relocation
Simon Glass
- [U-Boot] [PATCH v3 10/29] stdio: Provide functions to add/remove devices using stdio_dev
Simon Glass
- [U-Boot] [PATCH v3 11/29] console: Remove vprintf() optimisation for sandbox
Simon Glass
- [U-Boot] [PATCH v3 12/29] Add a flag indicating when the serial console is ready
Simon Glass
- [U-Boot] [PATCH v3 13/29] dm: Move uclass error checking/probing into a function
Simon Glass
- [U-Boot] [PATCH v3 14/29] fdt: Add a function to get the alias sequence of a node
Simon Glass
- [U-Boot] [PATCH v3 15/29] dm: Move device display into its own function
Simon Glass
- [U-Boot] [PATCH v3 16/29] dm: Avoid activating devices in 'dm uclass' command
Simon Glass
- [U-Boot] [PATCH v3 17/29] dm: Introduce device sequence numbering
Simon Glass
- [U-Boot] [PATCH v3 18/29] dm: Display the sequence number for each device
Simon Glass
- [U-Boot] [PATCH v3 19/29] dm: Allow a device to be found by its FDT offset
Simon Glass
- [U-Boot] [PATCH v3 20/29] dm: Avoid accessing uclasses before they are ready
Simon Glass
- [U-Boot] [PATCH v3 21/29] fdt: Add a function to get the node offset of an alias
Simon Glass
- [U-Boot] [PATCH v3 22/29] dm: Tidy up some header file comments
Simon Glass
- [U-Boot] [PATCH v3 23/29] dm: Provide a function to scan child FDT nodes
Simon Glass
- [U-Boot] [PATCH v3 24/29] dm: Add functions to access a device's children
Simon Glass
- [U-Boot] [PATCH v3 25/29] dm: Introduce per-child data for devices
Simon Glass
- [U-Boot] [PATCH v3 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Simon Glass
- [U-Boot] [PATCH v3 27/29] dm: Improve errors and warnings in lists_bind_fdt()
Simon Glass
- [U-Boot] [PATCH v3 28/29] dm: Add dm_scan_other() to locate board-specific devices
Simon Glass
- [U-Boot] [PATCH v3 29/29] dm: Give the demo uclass a name
Simon Glass
- [U-Boot] [PATCH] buildman: Add -F flag to retry failed builds
Simon Glass
- [U-Boot] [PATCH 2/6] buildman: Avoid retrying a build if it definitely failed
Simon Glass
- [U-Boot] [PATCH v3 1/9] Remove form-feeds from dlmalloc.c
Simon Glass
- [U-Boot] [PATCH v3 3/9] sandbox: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v3 4/9] Add a simple malloc() implementation for pre-relocation
Simon Glass
- [U-Boot] [PATCH v3 7/9] sandbox: Support pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 8/9] sandbox: config: Enable pre-relocation malloc()
Simon Glass
- [U-Boot] [PATCH v3 9/9] sandbox: Always enable malloc debug
Simon Glass
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Simon Glass
- [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py
Simon Glass
- [U-Boot] Refactoring of U-Boot directory structure
Simon Glass
- [U-Boot] Refactoring of U-Boot directory structure
Simon Glass
- [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files
Simon Glass
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Simon Glass
- [U-Boot] [PATCH] patman: Only apply patches when we know the original HEAD
Simon Glass
- [U-Boot] Please pull u-boot-x86.git branch patman
Simon Glass
- [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass
Simon Glass
- [U-Boot] [RFC PATCH v4 0/11] Enable driver model for GPIOs on Tegra and Exynos
Simon Glass
- [U-Boot] [PATCH v5 0/11] Enable driver model for GPIOs on Tegra and Exynos
Simon Glass
- [U-Boot] [PATCH v5 01/11] tegra: Convert tegra GPIO driver to use driver model
Simon Glass
- [U-Boot] [PATCH v5 02/11] exynos: dts: Convert /include/ to #include
Simon Glass
- [U-Boot] [PATCH v5 03/11] exynos: Bring in pinctrl dts files from Linux kernel
Simon Glass
- [U-Boot] [PATCH v5 04/11] exynos: dts: Remove unused pinctrl information to save space
Simon Glass
- [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot
Simon Glass
- [U-Boot] [PATCH v5 06/11] exynos: Tidy up GPIO headers
Simon Glass
- [U-Boot] [PATCH v5 07/11] exynos: Tidy up GPIO defines
Simon Glass
- [U-Boot] [PATCH v5 08/11] exynos: Make sure that GPIOs are requested
Simon Glass
- [U-Boot] [PATCH v5 09/11] dm: gpio: Enhance gpio command to show only active GPIOs
Simon Glass
- [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model
Simon Glass
- [U-Boot] [PATCH v5 11/11] dm: sandbox: dts: Add a GPIO bank
Simon Glass
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Simon Glass
- [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()
Simon Glass
- [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model
Simon Glass
- [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model
Simon Glass
- [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass
Simon Glass
- [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL
Simon Glass
- [U-Boot] [PATCH v2 1/3] buildman: Fix a few typos
Simon Glass
- [U-Boot] [PATCH v2 2/3] buildman: Add some notes about moving from MAKEALL
Simon Glass
- [U-Boot] [PATCH v2 3/3] RFC: Deprecate MAKEALL
Simon Glass
- [U-Boot] [PATCH 1/2] git-mailrc: Change fdt maintainer
Simon Glass
- [U-Boot] [PATCH 2/2] git-mailrc: Add myself as dm maintainer
Simon Glass
- [U-Boot] [PATCH v5 0/11] Enable driver model for GPIOs on Tegra and Exynos
Simon Glass
- [U-Boot] [PATCH v5 01/11] tegra: Convert tegra GPIO driver to use driver model
Simon Glass
- [U-Boot] [PATCH v5 02/11] exynos: dts: Convert /include/ to #include
Simon Glass
- [U-Boot] [PATCH v5 03/11] exynos: Bring in pinctrl dts files from Linux kernel
Simon Glass
- [U-Boot] [PATCH v5 04/11] exynos: dts: Remove unused pinctrl information to save space
Simon Glass
- [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot
Simon Glass
- [U-Boot] [PATCH v5 06/11] exynos: Tidy up GPIO headers
Simon Glass
- [U-Boot] [PATCH v5 07/11] exynos: Tidy up GPIO defines
Simon Glass
- [U-Boot] [PATCH v5 08/11] exynos: Make sure that GPIOs are requested
Simon Glass
- [U-Boot] [PATCH v5 09/11] dm: gpio: Enhance gpio command to show only active GPIOs
Simon Glass
- [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model
Simon Glass
- [U-Boot] [PATCH v5 11/11] dm: sandbox: dts: Add a GPIO bank
Simon Glass
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Simon Glass
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Simon Glass
- [U-Boot] [PATCH v3 0/16] Introduce driver model serial uclass
Simon Glass
- [U-Boot] [PATCH v3 01/16] serial: Set up the 'priv' pointer when creating a serial device
Simon Glass
- [U-Boot] [PATCH v3 02/16] dm: Adjust lists_bind_fdt() to return the bound device
Simon Glass
- [U-Boot] [PATCH v3 03/16] dm: Add a uclass for serial devices
Simon Glass
- [U-Boot] [PATCH v3 04/16] Set up stdio earlier when using driver model
Simon Glass
- [U-Boot] [PATCH v3 05/16] sandbox: Convert serial driver to use driver model
Simon Glass
- [U-Boot] [PATCH v3 06/16] sandbox: serial: Support a coloured console
Simon Glass
- [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node
Simon Glass
- [U-Boot] [PATCH v3 08/16] dm: exynos: Mark exynos5 console as pre-reloc
Simon Glass
- [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model
Simon Glass
- [U-Boot] [PATCH v3 10/16] dm: Make driver model available before board_init()
Simon Glass
- [U-Boot] [PATCH v3 11/16] dm: serial: Move baud rate calculation to ns16550.c
Simon Glass
- [U-Boot] [PATCH v3 12/16] dm: serial: Collect common baud rate code in ns16550
Simon Glass
- [U-Boot] [PATCH v3 13/16] dm: serial: Add driver model support for ns16550
Simon Glass
- [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details
Simon Glass
- [U-Boot] [PATCH v3 15/16] RFC: dm: tegra: Enable driver model for serial
Simon Glass
- [U-Boot] [PATCH v3 16/16] dm: tegra: Use V_NS16550_CLK only in SPL builds
Simon Glass
- [U-Boot] [PATCH 1/2] fdt: Rename fdt_resize() to fdt_shrink_to_minimum()
Simon Glass
- [U-Boot] [PATCH 2/2] fdt: Sync up with libfdt
Simon Glass
- [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15
Simon Glass
- [U-Boot] [PATCH v1 3/4] get_maintainer.pl: adapt to U-Boot tree
Simon Glass
- [U-Boot] Can not boot Linux with new FIT image on ARMv8
Simon Glass
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Simon Glass
- [U-Boot] Driver Model and DTS Parsing
Simon Glass
- [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot
Simon Glass
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Simon Glass
- [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model
Simon Glass
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Simon Glass
- [U-Boot] clang sandbox warning
Simon Glass
- [U-Boot] [PATCH] rsa: Fix two errors in the implementation
Simon Glass
- [U-Boot] Driver Model and DTS Parsing
Simon Glass
- [U-Boot] Can not boot Linux with new FIT image on ARMv8
Simon Glass
- [U-Boot] Driver Model and DTS Parsing
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support
Simon Glass
- [U-Boot] Driver Model and DTS Parsing
Simon Glass
- [U-Boot] [patch 0/2] SPL: Lightweight UBI and UBI fastmap support
Thomas Gleixner
- [U-Boot] [patch 1/2] nand_spl_simple: Add a simple flash read function
Thomas Gleixner
- [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support
Thomas Gleixner
- [U-Boot] [PATCH] git-mailrc: Add sunxi custodians.
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Hans de Goede
- [U-Boot] [linux-sunxi] Re: [PATCH v2 2/5] sunxi: add USB EHCI driver
Hans de Goede
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Hans de Goede
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Hans de Goede
- [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes
Hans de Goede
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Hans de Goede
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Hans de Goede
- [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms
Hans de Goede
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Hans de Goede
- [U-Boot] [PATCH v3 03/10] sunxi: Remove mmc DMA support
Hans de Goede
- [U-Boot] [PATCH v3 04/10] sunxi: Implement reset_cpu
Hans de Goede
- [U-Boot] [PATCH v3 06/10] sunxi: Add sun5i support
Hans de Goede
- [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver
Hans de Goede
- [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller
Hans de Goede
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Hans de Goede
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Hans de Goede
- [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI
Hans de Goede
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Hans de Goede
- [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller
Hans de Goede
- [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver
Hans de Goede
- [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller
Hans de Goede
- [U-Boot] [PATCH 1/7] sun4i: add USB EHCI settings
Hans de Goede
- [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings
Hans de Goede
- [U-Boot] [PATCH 3/7] sunxi: Enable EHCI on various sunxi boards
Hans de Goede
- [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Hans de Goede
- [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards
Hans de Goede
- [U-Boot] [PATCH 6/7] sun5i: Add support for a number of new sun5i boards
Hans de Goede
- [U-Boot] [PATCH 7/7] sun7i: Add support for a number of new sun7i boards
Hans de Goede
- [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings
Hans de Goede
- [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Hans de Goede
- [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards
Hans de Goede
- [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Hans de Goede
- [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds
Hans de Goede
- [U-Boot] [PATCH] sun7i: Add bananapi board
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi.git/master
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi.git/master
Hans de Goede
- [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi.git/master
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi.git/master
Hans de Goede
- [U-Boot] Quick guide to Kconfig
Hans de Goede
- [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c
Hans de Goede
- [U-Boot] Fwd: Re: [PATCH 2/3] env_mmc: support env partition setup in runtime
Igor Grinberg
- [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support
Igor Grinberg
- [U-Boot] Fwd: Re: [PATCH 2/3] env_mmc: support env partition setup in runtime
Igor Grinberg
- [U-Boot] [PATCH 0/3] Fix {c,e}tags/cscope build targets
Igor Grinberg
- [U-Boot] [PATCH 1/3] Makefile: fix the {c, e}tags/cscope build targets
Igor Grinberg
- [U-Boot] [PATCH 2/3] Makefile: fix ctags/etags clean targets
Igor Grinberg
- [U-Boot] [PATCH 3/3] Makefile: fix tags target documentation
Igor Grinberg
- [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime
Igor Grinberg
- [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support
Pekon Gupta
- [U-Boot] [PATCH v1 1/7] TI: armv7: move board specific NAND configs out from ti_armv7_common.h and ti_am335x_common.h
Pekon Gupta
- [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape
Pekon Gupta
- [U-Boot] [PATCH v1 3/7] arm: lib: continue board_init_r even if valid flash device is not detected
Pekon Gupta
- [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape
Pekon Gupta
- [U-Boot] [PATCH v1 5/7] board/ti/am335x: update configs for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v1 6/7] board/ti/am43xx: add support for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support
Gupta, Pekon
- [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform
Gupta, Pekon
- [U-Boot] [PATCH 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c
Gupta, Pekon
- [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform
Gupta, Pekon
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Gupta, Pekon
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Gupta, Pekon
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Gupta, Pekon
- [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot
Gupta, Pekon
- [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot
Gupta, Pekon
- [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND
Gupta, Pekon
- [U-Boot] [PATCH v1 0/3] ARM: omap: clean GPMC macros
Pekon Gupta
- [U-Boot] [PATCH v1 1/3] ARM: omap: fix GPMC address-map size for NAND and NOR devices
Pekon Gupta
- [U-Boot] [PATCH v1 2/3] ARM: omap: clean redundant PISMO_xx macros used in OMAP3
Pekon Gupta
- [U-Boot] [PATCH v1 3/3] ARM: omap: move board specific NAND configs out from ti_armv7_common.h
Pekon Gupta
- [U-Boot] [PATCH v1 0/3] ARM: omap: clean GPMC macros
Gupta, Pekon
- [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape
Gupta, Pekon
- [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape
Gupta, Pekon
- [U-Boot] [PATCH v2 0/6] board/ti/xxx: Add NAND and NOR support for new TI boards
Pekon Gupta
- [U-Boot] [PATCH v2 1/6] board/ti/am335x: update configs for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v2 2/6] board/ti/am335x: add support for beaglebone NAND cape
Pekon Gupta
- [U-Boot] [PATCH v2 3/6] board/ti/am335x: add support for beaglebone NOR Cape
Pekon Gupta
- [U-Boot] [PATCH v2 4/6] board/ti/am43xx: add support for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v2 5/6] board/ti/dra7xx: add support for parallel NAND
Pekon Gupta
- [U-Boot] [PATCH v2 6/6] board/ti/dra7xx: add support for parallel NOR
Pekon Gupta
- [U-Boot] [PATCH v2 0/2] OMAP/GPMC: speed up NAND read access
Gupta, Pekon
- [U-Boot] [PATCH] doc: README.android-fastboot: Add note about vendor ID
Rob Herring
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Pavel Herrmann
- [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Pavel Herrmann
- [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods
Pavel Herrmann
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Pavel Herrmann
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Pavel Herrmann
- [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Pavel Herrmann
- [U-Boot] [PATCH v5] net/phy: Add support for CS4315/CS4340 PHY
Joe Hershberger
- [U-Boot] [PATCH 12/12] net: smc911x: Keep MAC programmed
Joe Hershberger
- [U-Boot] [PATCH] pxe: clear Bootfile before returning
Joe Hershberger
- [U-Boot] [PATCH] pxe: clear Bootfile before returning
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: remove dead drivers
Joe Hershberger
- [U-Boot] [PATCH] ARM:asm:io.h use static inline
Jeroen Hofstee
- [U-Boot] [PATCH] ARM:asm:io.h use static inline
Jeroen Hofstee
- [U-Boot] [RFC 06/10] cc-option: make it work with clang
Jeroen Hofstee
- [U-Boot] Giving control to standalone app.
Jeroen Hofstee
- [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()
Jeroen Hofstee
- [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()
Jeroen Hofstee
- [U-Boot] Please pull u-boot-sunxi.git/next
Jeroen Hofstee
- [U-Boot] [PATCH] lib:sha1: remove unused constant
Jeroen Hofstee
- [U-Boot] [PATCH] env_callback.h: spl: mark callback as maybe_unused
Jeroen Hofstee
- [U-Boot] [PATCH] lcd: remove unused lcd_puts_xy
Jeroen Hofstee
- [U-Boot] [PATCH] lib:vsprintf: reduce scope of pack_hex_byte
Jeroen Hofstee
- [U-Boot] [PATCH] dirvers: mmc: use __weak
Jeroen Hofstee
- [U-Boot] [PATCH] common: bootm_os: make arch_preboot_os __weak
Jeroen Hofstee
- [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak
Jeroen Hofstee
- [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak
Jeroen Hofstee
- [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak
Jeroen Hofstee
- [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()
Jeroen Hofstee
- [U-Boot] [RFC 01/10] ARM: crt0.S: clear the global data
Jeroen Hofstee
- [U-Boot] [PATCH 0/2] cmd_ide: compile with clang and some cleanup
Jeroen Hofstee
- [U-Boot] [PATCH 1/2] common: cmd_ide: remove PIO mode
Jeroen Hofstee
- [U-Boot] [PATCH 2/2] common: cmd_ide: use __weak and add prototypes
Jeroen Hofstee
- [U-Boot] [PATCH v2 0/2] yaffs2: fix clang warnings and small cleanup
Jeroen Hofstee
- [U-Boot] [PATCH v2 1/2] yaffs2: cosmetic: remove self assignments
Jeroen Hofstee
- [U-Boot] [PATCH v2 2/2] yaffs2: preprocessor cleanup
Jeroen Hofstee
- [U-Boot] [PATCH v2] common: env_common: make env_get_char_spec __weak
Jeroen Hofstee
- [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings
Jeroen Hofstee
- [U-Boot] [PATCH] mmc: prevent some warnings with make W=1
Jeroen Hofstee
- [U-Boot] [PATCH] board: rpi_b: include mmc header and fix prototype
Jeroen Hofstee
- [U-Boot] [PATCH v2] board: rpi_b: include mmc header and fix prototype
Jeroen Hofstee
- [U-Boot] [PATCH] autoboot: add its own header
Jeroen Hofstee
- [U-Boot] [PATCH] common: cmd_mii: fix printf format warning
Jeroen Hofstee
- [U-Boot] ARM: 743626—An imprecise external abort, received while the processor enters WFI, may cause a processor deadlock
Jeroen Hofstee
- [U-Boot] DM, Kconfig and clang changes
Jeroen Hofstee
- [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command
Jeroen Hofstee
- [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make
Jeroen Hofstee
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Jeroen Hofstee
- [U-Boot] Random number generator - why I need it
Jeroen Hofstee
- [U-Boot] [PATCH] whitespace cleanups
Jeroen Hofstee
- [U-Boot] [PATCH] whitespace cleanups
Jeroen Hofstee
- [U-Boot] [PATCH] Makefile: replace stat -c %s with wc
Jeroen Hofstee
- [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make
Jeroen Hofstee
- [U-Boot] Bug u-boot-tools: /usr/include/image.h gets included instead of <WC>/include/image.h
Jeroen Hofstee
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Jeroen Hofstee
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Jeroen Hofstee
- [U-Boot] [PATCH v2] Makefile: fix binary_size_check target
Jeroen Hofstee
- [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver
Jeroen Hofstee
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Jeroen Hofstee
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Jeroen Hofstee
- [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator
Jeroen Hofstee
- [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds
Jeroen Hofstee
- [U-Boot] [PATCH] SOM: tam3517: convert to generic board
Jeroen Hofstee
- [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime
Jeroen Hofstee
- [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig
Jeroen Hofstee
- [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig
Jeroen Hofstee
- [U-Boot] [PATCH v2 0/8] add clang support for some ARM boards
Jeroen Hofstee
- [U-Boot] [PATCH v2 1/8] board_r: ARM[64] do not set gd again
Jeroen Hofstee
- [U-Boot] [PATCH v2 2/8] ARM: SPL: do not set gd again
Jeroen Hofstee
- [U-Boot] [PATCH v2 3/8] cc-option: also detect unsupported warnings options
Jeroen Hofstee
- [U-Boot] [PATCH v2 4/8] ARM: make gd a function for clang
Jeroen Hofstee
- [U-Boot] [PATCH v2 5/8] eabi_compat: add __aeabi_memcpy __aeabi_memset
Jeroen Hofstee
- [U-Boot] [PATCH v2 6/8] clang: workaround for generated constants
Jeroen Hofstee
- [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler
Jeroen Hofstee
- [U-Boot] [PATCH v2 8/8] README.clang: build command with clang
Jeroen Hofstee
- [U-Boot] [PATCH] rsa: Fix two errors in the implementation
Jeroen Hofstee
- [U-Boot] [PATCH] rsa: Fix two errors in the implementation
Jeroen Hofstee
- [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c
Jeroen Hofstee
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Jeroen Hofstee
- [U-Boot] [PATCH 0/4] Add option -r to env import to allow import of text files with CRLF as line endings
Alexander Holler
- [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings
Alexander Holler
- [U-Boot] [PATCH 2/4] omap3_beagle: handle import of environments in files with CRLF as line endings
Alexander Holler
- [U-Boot] [PATCH 3/4] am335x_evm: handle import of environments in files with CRLF as line endings
Alexander Holler
- [U-Boot] [PATCH 4/4] rpi_b: handle import of environments in files with CRLF as line endings
Alexander Holler
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
Gabriel Huau
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
Gabriel Huau
- [U-Boot] [PATCH v6] mx6: add support of multi-processor command
Gabriel Huau
- [U-Boot] [PATCH] kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabled
Alexey Ignatov
- [U-Boot] [Question] Is it safe to use 'set verify n' ?
Frank Ihle
- [U-Boot] Quick guide to Kconfig
Frank Ihle
- [U-Boot] Quick guide to Kconfig
Frank Ihle
- [U-Boot] [PATCH 0/4] Add support Alt board of Renesas R-Car
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/4] net: sh-eth: Add support R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] serial: sh: Add support R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] arm: rmobile: Add support Alt board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] board_r: Add missing return to initr_doc
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Add register infomation of i2c for rcar
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] serial: sh: Add support DL and CKS register for R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] serial: sh: Add support External Clock mode
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] usb: ehci: rmobile: Remove xHCI address
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb
Priyanka Jain
- [U-Boot] How to find latest stable uboot version currently.
Rohit Jindal
- [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Maxin B. John
- [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Maxin B. John
- [U-Boot] [PATCH v2] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Maxin B. John
- [U-Boot] [PATCH] vitesse: remove duplicated argument to ||
Maxin B. John
- [U-Boot] [PATCH] emif.h: remove duplicated argument to |
Maxin B. John
- [U-Boot] Reading multiple bytes using I2C in U-Boot
Nildo Junior
- [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset
Minkyu Kang
- [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Minkyu Kang
- [U-Boot] [PATCH V3 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Minkyu Kang
- [U-Boot] [PATCH V3 1/9] exynos_fb: Remove usage of static defines
Minkyu Kang
- [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process
Murali Karicheri
- [U-Boot] [U-boot] [Patch v2 3/3] k2hk_evm: add script to automate NAND flash process
Murali Karicheri
- [U-Boot] [PATCH 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v3 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver
Gerald Kerma
- [U-Boot] [PATCH 1/1] ARM: sheevaplug: fix uboot corruption
Gerald Kerma
- [U-Boot] [U-boot] [Patch 0/3] Add support for NAND U-boot image upgrade
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 2/3] keystone: add support for NAND gpheader image
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 0/3] Add support for NAND U-boot image upgrade
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 2/3] keystone: add support for NAND gpheader image
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 3/3] k2hk_evm: add script to automate NAND flash process
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 0/6] Optimize Keystone2 code for other SoC types
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 1/6] ARM: keystone2: psc: use common PSC base
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 5/6] keystone2: move cpu_to_bus() to keystone.c
Ivan Khoronzhuk
- [U-Boot] [[U-boot] [Patch 6/6] keystone2: add possibility to turn off all dsps
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 0/6] Optimize Keystone2 code for other SoC types
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 1/6] ARM: keystone2: psc: use common PSC base
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 5/6] keystone2: move cpu_to_bus() to keystone.c
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch v2 6/6] keystone2: add possibility to turn off all dsps
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 0/6] Add support for k2e SoC and EVM
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 1/6] ARM: keystone2: add K2E SoC hardware definitions
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 2/6] ARM: keystone2: clock: add K2E clock support
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: add MSMC cache coherency support for K2E SOC
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 5/6] ARM: keystone2: spl: add K2E SoC support
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch 6/6] board: k2e-evm: add board support
Ivan Khoronzhuk
- [U-Boot] [U-boot] [Patch] keystone2: use EFUSE_BOOTROM information to configure PLLs
Ivan Khoronzhuk
- [U-Boot] [PATCHv2] pcm051: use ti_am335x_common.h config
Matwey V. Kornilov
- [U-Boot] [PATCH] arm: ep9315: Add .vectors section to lds and remove obsolete lds
Sergey Kostanbaev
- [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Jörg Krause
- [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Jörg Krause
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Jörg Krause
- [U-Boot] [PATCH V3 0/9] peach_pit: Add support for FIMD, DP and parade chip
Ajay Kumar
- [U-Boot] [PATCH V3 1/9] exynos_fb: Remove usage of static defines
Ajay Kumar
- [U-Boot] [PATCH V3 2/9] arm: exynos: Add RPLL for Exynos5420
Ajay Kumar
- [U-Boot] [PATCH V3 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Ajay Kumar
- [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu
Ajay Kumar
- [U-Boot] [PATCH V3 5/9] video: Add driver for Parade PS8625 dP to LVDS bridge
Ajay Kumar
- [U-Boot] [PATCH V3 6/9] ARM: exynos: Add missing declaration for gpio_direction_input
Ajay Kumar
- [U-Boot] [PATCH V3 7/9] exynos5420: add callbacks needed for exynos_fb driver
Ajay Kumar
- [U-Boot] [PATCH V3 8/9] ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge chip
Ajay Kumar
- [U-Boot] [PATCH V3 9/9] CONFIGS: peach-pit: Enable display for peach_pit board
Ajay Kumar
- [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip
Ajay Kumar
- [U-Boot] [PATCH V4 1/9] exynos_fb: Remove usage of static defines
Ajay Kumar
- [U-Boot] [PATCH V4 2/9] arm: exynos: Add RPLL for Exynos5420
Ajay Kumar
- [U-Boot] [PATCH V4 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Ajay Kumar
- [U-Boot] [PATCH V4 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu
Ajay Kumar
- [U-Boot] [PATCH V4 5/9] video: Add driver for Parade PS8625 dP to LVDS bridge
Ajay Kumar
- [U-Boot] [PATCH V4 6/9] ARM: exynos: Add missing declaration for gpio_direction_input
Ajay Kumar
- [U-Boot] [PATCH V4 7/9] exynos5420: add callbacks needed for exynos_fb driver
Ajay Kumar
- [U-Boot] [PATCH V4 8/9] ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge chip
Ajay Kumar
- [U-Boot] [PATCH V4 9/9] CONFIGS: peach-pit: Enable display for peach_pit board
Ajay Kumar
- [U-Boot] [PATCH] board/ls2085a: Update env_addr after NOR flash relocation
Prabhakar Kushwaha
- [U-Boot] [PATCH] driver/mtd: Use generic timer API for FSL IFC, eLBC
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/ls2085a: Add support of NOR and NAND flash for simulator
Prabhakar Kushwaha
- [U-Boot] [linux-sunxi] [PATCH v2 2/5] sunxi: add USB EHCI driver
Priit Laes
- [U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2
Shaveta Leekha
- [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
Shaveta Leekha
- [U-Boot] [PATCH] powerpc/chassis2: Configure and enable L2 cache for PPC clusters only
Shaveta Leekha
- [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.
Xiubo Li
- [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.
Xiubo Li
- [U-Boot] [PATCH 2/4] ARM: add the pen address byte reverting support.
Xiubo Li
- [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7
Xiubo Li
- [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region
Xiubo Li
- [U-Boot] [PATCH] arch/arm: Add individual TLB size support.
Xiubo Li
- [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime
Dmitry Lifshitz
- [U-Boot] [PATCH 1/2] env_mmc: add mmc_get_env_addr() prototype
Dmitry Lifshitz
- [U-Boot] [PATCH v2 2/2] env_mmc: support env partition setup in runtime
Dmitry Lifshitz
- [U-Boot] [PATCH 0/3] cm-t54: misc board fixes, convert to generic board
Dmitry Lifshitz
- [U-Boot] [PATCH 1/3] cm-t54: fix EEPROM read return value check
Dmitry Lifshitz
- [U-Boot] [PATCH 2/3] cm-t54: fix eMMC boot mode check
Dmitry Lifshitz
- [U-Boot] [PATCH 3/3] cm-t54: convert to generic board
Dmitry Lifshitz
- [U-Boot] SPL broken on i.mx31 platforms
Magnus Lilja
- [U-Boot] SPL broken on i.mx31 platforms
Magnus Lilja
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Rostislav Lisovy
- [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb
Shengzhou Liu
- [U-Boot] [PATCH] powerpc/t1040: update i2c for t1040qds and t104xrdb
Shengzhou Liu
- [U-Boot] [PATCH] fsl_i2c: add support for 3rd and 4th I2C
Shengzhou Liu
- [U-Boot] [PATCH] board/freescale: use generic board architecture for t2080qds and t2080rdb
Shengzhou Liu
- [U-Boot] Enabling multiple serial ports for OMAP3 EVM on u-boot 2014.04
Lnijalin
- [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering
Jon Loeliger
- [U-Boot] WIP for SPI
Jon Loeliger
- [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin
Jon Loeliger
- [U-Boot] [PATCH] kmp204x: set the ZL clk chips reset to power up only
Valentin Longchamp
- [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM
Valentin Longchamp
- [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM
Valentin Longchamp
- [U-Boot] Silly question regarding mx28_adjust_mac and MAC OUIs?
Stuart Longland
- [U-Boot] [PATCH] powerpc/85xx: enable mtdparts for nor flash
Yangbo Lu
- [U-Boot] [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash
Yangbo Lu
- [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images
Pavel Machek
- [U-Boot] [PATCH v2] mx6: add support of multi-processor command
Pavel Machek
- [U-Boot] [PATCH] Fix help text of ext2load and fatload.
Pavel Machek
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Pavel Machek
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Pavel Machek
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Pavel Machek
- [U-Boot] [PATCH] Fix help text of ext2load and fatload.
Pavel Machek
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Pavel Machek
- [U-Boot] socfpga: time problems, get ethernet to work in recent versions
Pavel Machek
- [U-Boot] socfpga: time problems, get ethernet to work in recent versions
Pavel Machek
- [U-Boot] socfpga: time problems, get ethernet to work in recent versions
Pavel Machek
- [U-Boot] [PATCH] bootp can use mdelay
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCH] socfpga: initialize designware ethernet
Pavel Machek
- [U-Boot] [PATCH] socfpga: initialize designware ethernet
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCHv2] socfpga: initialize designware ethernet
Pavel Machek
- [U-Boot] [PATCHv2] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCH] socfpga: timer actually counts down
Pavel Machek
- [U-Boot] [PATCH] lib/time.c cleanups
Pavel Machek
- [U-Boot] [PATCH] lib/time.c cleanups
Pavel Machek
- [U-Boot] [PATCHv3] socfpga: initialize designware ethernet
Pavel Machek
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Pavel Machek
- [U-Boot] [PATCHv3] socfpga: initialize designware ethernet
Pavel Machek
- [U-Boot] [PATCH] Fix help text of ext2load and fatload.
Pavel Machek
- [U-Boot] socfpga: initialize MMC
Pavel Machek
- [U-Boot] socfpga: initialize MMC
Pavel Machek
- [U-Boot] [PATCH] whitespace cleanups
Pavel Machek
- [U-Boot] [patch] socfpga: fix clock manager register definition
Pavel Machek
- [U-Boot] [patch] socfpga: fix clock manager register definition
Pavel Machek
- [U-Boot] [PATCH] whitespace cleanups
Pavel Machek
- [U-Boot] socfpga: initialize MMC
Pavel Machek
- [U-Boot] [PATCH] socfpga: cleanup socfpga_dw_mmc
Pavel Machek
- [U-Boot] [PATCHv2] socfpga: cleanup socfpga_dw_mmc
Pavel Machek
- [U-Boot] socfpga: initialize MMC
Pavel Machek
- [U-Boot] socfpga: initialize MMC
Pavel Machek
- [U-Boot] ext4load: fix help text
Pavel Machek
- [U-Boot] [PATCH] usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host mode
Daniel Mack
- [U-Boot] [PATCH 1/3] test: dfu: cleanup before execution
Lukasz Majewski
- [U-Boot] [PATCH 2/3] test: dfu: add some more test cases
Lukasz Majewski
- [U-Boot] [PATCH 3/3] dfu: fix readback buffer overflow test
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation
Lukasz Majewski
- [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation
Lukasz Majewski
- [U-Boot] [PATCH] ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute path
Lukasz Majewski
- [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)
Lukasz Majewski
- [U-Boot] fatload from eMMC general purpose partition
Lukasz Majewski
- [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget
Lukasz Majewski
- [U-Boot] [PATCH 0/3] test: Extending USB gadget tests infrastructure
Lukasz Majewski
- [U-Boot] [PATCH 1/3] test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files
Lukasz Majewski
- [U-Boot] [PATCH 2/3] test: dfu: cosmetic: Add missing license information to DFU test scripts
Lukasz Majewski
- [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation
Lukasz Majewski
- [U-Boot] [PATCH] boards:trats2: New Trats2 board maintainer
Lukasz Majewski
- [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation
Lukasz Majewski
- [U-Boot] ARM: 743626—An imprecise external abort, received while the processor enters WFI, may cause a processor deadlock
Manyam
- [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v4 00/12] Add support to Odroid U3/X2
Przemyslaw Marczak
- [U-Boot] [PATCH v4 01/12] samsung: misc: fix soc revision setting in the set_board_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v4 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
Przemyslaw Marczak
- [U-Boot] [PATCH v4 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Przemyslaw Marczak
- [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.
Przemyslaw Marczak
- [U-Boot] [PATCH v4 05/12] samsung: misc: add function for setting $dfu_alt_info
Przemyslaw Marczak
- [U-Boot] [PATCH v4 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v4 07/12] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types
Przemyslaw Marczak
- [U-Boot] [PATCH v4 09/12] samsung: misc: use board specific functions to set env board info
Przemyslaw Marczak
- [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH v4 11/12] odroid: add odroid U3/X2 device tree description
Przemyslaw Marczak
- [U-Boot] [PATCH v4 12/12] odroid: add odroid_config
Przemyslaw Marczak
- [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.
Przemyslaw Marczak
- [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types
Przemyslaw Marczak
- [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH v5 00/12] Add support to Odroid U3/X2
Przemyslaw Marczak
- [U-Boot] [PATCH v5 01/12] samsung: misc: fix soc revision setting in the set_board_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v5 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
Przemyslaw Marczak
- [U-Boot] [PATCH v5 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Przemyslaw Marczak
- [U-Boot] [PATCH v5 04/12] board:samsung: check the boot device and init the right mmc driver.
Przemyslaw Marczak
- [U-Boot] [PATCH v5 05/12] samsung: misc: add function for setting $dfu_alt_info
Przemyslaw Marczak
- [U-Boot] [PATCH v5 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v5 07/12] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v5 08/12] samsung: board: enable support of multiple board types
Przemyslaw Marczak
- [U-Boot] [PATCH v5 09/12] samsung: misc: use board specific functions to set env board info
Przemyslaw Marczak
- [U-Boot] [PATCH v5 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH v5 11/12] odroid: add odroid U3/X2 device tree description
Przemyslaw Marczak
- [U-Boot] [PATCH v5 12/12] odroid: add odroid_config
Przemyslaw Marczak
- [U-Boot] uboot/odroid test report
Przemyslaw Marczak
- [U-Boot] uboot/odroid test report
Przemyslaw Marczak
- [U-Boot] uboot/odroid test report
Przemyslaw Marczak
- [U-Boot] uboot/odroid test report
Przemyslaw Marczak
- [U-Boot] [PATCH v6 00/12] Add support to Odroid U3/X2
Przemyslaw Marczak
- [U-Boot] [PATCH v6 01/12] samsung: misc: fix soc revision setting in the set_board_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v6 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
Przemyslaw Marczak
- [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Przemyslaw Marczak
- [U-Boot] [PATCH v6 04/12] board:samsung: check the boot device and init the right mmc driver.
Przemyslaw Marczak
- [U-Boot] [PATCH v6 05/12] samsung: misc: add function for setting $dfu_alt_info
Przemyslaw Marczak
- [U-Boot] [PATCH v6 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v6 07/12] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v6 08/12] samsung: board: enable support of multiple board types
Przemyslaw Marczak
- [U-Boot] [PATCH v6 09/12] samsung: misc: use board specific functions to set env board info
Przemyslaw Marczak
- [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH v6 11/12] odroid: add odroid U3/X2 device tree description
Przemyslaw Marczak
- [U-Boot] [PATCH v6 12/12] odroid: add odroid_config
Przemyslaw Marczak
- [U-Boot] ODROID dynamic memory initialization
Przemyslaw Marczak
- [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz
Przemyslaw Marczak
- [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz
Przemyslaw Marczak
- [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Przemyslaw Marczak
- [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH] test email
Przemyslaw Marczak
- [U-Boot] [PATCH] test email
Przemyslaw Marczak
- [U-Boot] [PATCH v7 00/12] Add support to Odroid U3/X2
Przemyslaw Marczak
- [U-Boot] [PATCH v7 01/12] samsung: misc: fix soc revision setting in the set_board_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v7 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc
Przemyslaw Marczak
- [U-Boot] [PATCH v7 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup
Przemyslaw Marczak
- [U-Boot] [PATCH v7 04/12] board:samsung: check the boot device and init the right mmc driver.
Przemyslaw Marczak
- [U-Boot] [PATCH v7 05/12] samsung: misc: add function for setting $dfu_alt_info
Przemyslaw Marczak
- [U-Boot] [PATCH v7 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()
Przemyslaw Marczak
- [U-Boot] [PATCH v7 07/12] arm:reset: call the reset_misc() before the cpu reset
Przemyslaw Marczak
- [U-Boot] [PATCH v7 08/12] samsung: board: enable support of multiple board types
Przemyslaw Marczak
- [U-Boot] [PATCH v7 09/12] samsung: misc: use board specific functions to set env board info
Przemyslaw Marczak
- [U-Boot] [PATCH v7 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412
Przemyslaw Marczak
- [U-Boot] [PATCH v7 11/12] odroid: add odroid U3/X2 device tree description
Przemyslaw Marczak
- [U-Boot] [PATCH v7 12/12] odroid: add odroid_config
Przemyslaw Marczak
- [U-Boot] [PATCH] ARM: tegra: Add support for norrin board
Allen Martin
- [U-Boot] [PATCH] fsl/usb: Add USB XHCI support
Ramneek Mehresh
- [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer
Nishanth Menon
- [U-Boot] Fwd: Debian platform firmware strategy?
Chris Moore
- [U-Boot] fatload from eMMC general purpose partition
Andreas Naumann
- [U-Boot] fatload from eMMC general purpose partition
Andreas Naumann
- [U-Boot] new dev question
David Nelson
- [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
Eric Nelson
- [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
Eric Nelson
- [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support
Markus Niebel
- [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support
Markus Niebel
- [U-Boot] [PATCH v4] Add TQ Systems TQMa6 board support
Markus Niebel
- [U-Boot] [PATCH] RTC: add support for DS1339 (using DS1307 driver)
Markus Niebel
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Henrik Nordström
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Brian Norris
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Brian Norris
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Brian Norris
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Brian Norris
- [U-Boot] arm builds fail with with CONFIG_USE_IRQ
Chris Packham
- [U-Boot] arm builds fail with with CONFIG_USE_IRQ
Chris Packham
- [U-Boot] arm builds fail with with CONFIG_USE_IRQ
Chris Packham
- [U-Boot] [PATCH v1] arm: include config.h in vectors.S
Chris Packham
- [U-Boot] [PATCH v1] arm: include config.h in vectors.S
Chris Packham
- [U-Boot] [PATCH v1] arm: include config.h in vectors.S
Chris Packham
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Chris Packham
- [U-Boot] [PATCH v2] Makefile: use $(shell ...) for determining file_size
Chris Packham
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Chris Packham
- [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check
Chris Packham
- [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check
Chris Packham
- [U-Boot] u-boot elf generation for arm64
S Durga Prasad Paladugu
- [U-Boot] dfu download issue with ci_udc
S Durga Prasad Paladugu
- [U-Boot] dfu download issue with ci_udc
S Durga Prasad Paladugu
- [U-Boot] dfu download issue with ci_udc
S Durga Prasad Paladugu
- [U-Boot] [PATCH v1 20/25] arm: kirkwood: Remove some dead code from cpu.c
Luka Perkov
- [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files
Luka Perkov
- [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id
Luka Perkov
- [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default
Luka Perkov
- [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
Luka Perkov
- [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP
Luka Perkov
- [U-Boot] [PATCH v1 23/25] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported
Luka Perkov
- [U-Boot] [PATCH v1 24/25] tools: kwbimage: Add image version 1 support for Armada XP / 370
Luka Perkov
- [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP
Luka Perkov
- [U-Boot] git pull fails ?!
Hannes Petermaier
- [U-Boot] git pull fails ?!
Hannes Petermaier
- [U-Boot] [PATCH] lcd: support displaying 24bpp BMPs on >= 24bpp LCDs
Hannes Petermaier
- [U-Boot] [PATCH] sun7i: Add bananapi board
Hannes Petermaier
- [U-Boot] [PATCH] sun7i: Add bananapi board
Hannes Petermaier
- [U-Boot] SPL and an LCD splash screen on AM335x
Andy Pont
- [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer
Sricharan R
- [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw
Bastien ROUCARIES
- [U-Boot] [PATCH V5: 5/5] Add documentation for dns-32{0,5}
Bastien ROUCARIES
- [U-Boot] [PATCH v4: DNS320 support 0/4] Add a new kirkwook board
Bastien ROUCARIÈS
- [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw
Bastien ROUCARIÈS
- [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320
Bastien ROUCARIÈS
- [U-Boot] [PATCH 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325
Bastien ROUCARIÈS
- [U-Boot] [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 0/5] Add a new kirkwook board
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 1/5] kirkwood: Rename dns325 to dnskw
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 2/5] kirkwood: Add support for the D-Link DNS-320
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 3/5] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 4/5] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320
Bastien ROUCARIÈS
- [U-Boot] [PATCH V5: 5/5] Add documentation for dns-32{0,5}
Bastien ROUCARIÈS
- [U-Boot] [PATCH] mmc: sdhci: Fixed timeout for sdhci_send_command()
Steve Rae
- [U-Boot] [PATCH] arm: Fix armv8 compilation error
Steve Rae
- [U-Boot] [PATCH 0/4] Introducing the Broadcom Cygnus and NSP boards.
Steve Rae
- [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code
Steve Rae
- [U-Boot] [PATCH 2/4] arm: bcmcygnus: Add bcmcygnus u-architecture
Steve Rae
- [U-Boot] [PATCH 3/4] arm: bcmnsp: Add bcmnsp u-architecture
Steve Rae
- [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards
Steve Rae
- [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards
Steve Rae
- [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code
Steve Rae
- [U-Boot] [PATCH v2 0/4] Introducing the Broadcom Cygnus and NSP boards.
Steve Rae
- [U-Boot] [PATCH v2 1/4] arm: iproc: Initial commit of iproc architecture code
Steve Rae
- [U-Boot] [PATCH v2 2/4] arm: bcmcygnus: Add bcmcygnus u-architecture
Steve Rae
- [U-Boot] [PATCH v2 3/4] arm: bcmnsp: Add bcmnsp u-architecture
Steve Rae
- [U-Boot] [PATCH v2 4/4] arm: add Cygnus and NSP boards
Steve Rae
- [U-Boot] [PATCH] arm: bcm281xx: Add Ethernet Clock support
Steve Rae
- [U-Boot] [PATCH v2 0/4] Introducing the Broadcom Cygnus and NSP boards.
Steve Rae
- [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC
Steve Rae
- [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC
Steve Rae
- [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions
Steve Rae
- [U-Boot] [PATCH] powerpc/t104xrdb: Add T1042RDB board support
Vijay Rai
- [U-Boot] [PATCH v2] powerpc/t104xrdb: Add T1042RDB board support
Vijay Rai
- [U-Boot] [PATCH] powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-boot
Vijay Rai
- [U-Boot] [PATCH v2] powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-boot
Vijay Rai
- [U-Boot] [PATCH] driver/qe: update status of QE microcode
Vijay Rai
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms, FIX?
Helmut Raiger
- [U-Boot] SPL broken on i.mx31 platforms
Helmut Raiger
- [U-Boot] Tegra T30 support, bootcounting and watchdog
Gabriele Randelli
- [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)
Christian Riesch
- [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)
Christian Riesch
- [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)
Christian Riesch
- [U-Boot] [PATCH] arm: include config.h in arch/arm/lib/vectors.S
Christian Riesch
- [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin
Christian Riesch
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [ANN] U-Boot v2014.07-rc4 released
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Tom Rini
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Tom Rini
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Tom Rini
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Tom Rini
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Tom Rini
- [U-Boot] [i2c] Pull request
Tom Rini
- [U-Boot] Avoid using gawk-specific strtonum()
Tom Rini
- [U-Boot] ARM: emif4: wait for CM_DLL_READYST to be set
Tom Rini
- [U-Boot] vcma9/lowlevel_init.S: trivial: terminate comment
Tom Rini
- [U-Boot] tpm: don't use unneeded double brackets
Tom Rini
- [U-Boot] [U-Boot, 1/7] mpc8xx: remove qs850, qs860t board support
Tom Rini
- [U-Boot] [U-Boot, 2/7] mpc8xx: remove RPXlite_dw, quantum board support
Tom Rini
- [U-Boot] [U-Boot, 4/7] mpc8xx: remove netta, netta2, netphone board support
Tom Rini
- [U-Boot] [U-Boot,5/7] mpc8xx: remove fads board support
Tom Rini
- [U-Boot] [U-Boot,6/7] mpc8xx: remove v37 board support
Tom Rini
- [U-Boot] [U-Boot,7/7] mpc8xx: remove spc1920 board support
Tom Rini
- [U-Boot] TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagle
Tom Rini
- [U-Boot] Makefile: drop arch/*/include/asm/proc from make mrproper pattern
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] env_fat: use get_device_and_partition() during env save and load
Tom Rini
- [U-Boot] [U-Boot, v3, 2/2] README: document the CONFIG_ENV_IS_IN_FAT option
Tom Rini
- [U-Boot] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists
Tom Rini
- [U-Boot] board: ti: dra7xx: add mux data for UART3
Tom Rini
- [U-Boot] doc/README.falcon: Clarify steps slightly.
Tom Rini
- [U-Boot] [U-Boot, 1/2] am43xx: Update EMIF DDR3 Configuration for AM43x GP
Tom Rini
- [U-Boot] [U-Boot, 2/2] am43xx: Tune the system to avoid DSS underflows
Tom Rini
- [U-Boot] m68k: Fix bug, "address of" operator was forgotten
Tom Rini
- [U-Boot] m68k: Fix incorrect memory access on M5235
Tom Rini
- [U-Boot] blackfin: Fix warning about undefined function
Tom Rini
- [U-Boot] blackfin: Add more dcache functions
Tom Rini
- [U-Boot] README: document CONFIG_ENV_IS_IN_SPI_FLASH
Tom Rini
- [U-Boot] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE
Tom Rini
- [U-Boot] [U-Boot, v4, 01/13] board: controlcenterd: Fix pci access
Tom Rini
- [U-Boot] [U-Boot, v4, 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change
Tom Rini
- [U-Boot] [U-Boot, v4, 03/13] board: controlcenterd: Use new API for setting i2c bus
Tom Rini
- [U-Boot] [U-Boot, v4, 04/13] board: iocon: Support DisplayPort hardware
Tom Rini
- [U-Boot] [U-Boot,v4,05/13] i2c: IHS I2C master driver
Tom Rini
- [U-Boot] [U-Boot, v4, 06/13] board: gdsys: Fix dlvision-10g I2C configuration
Tom Rini
- [U-Boot] [U-Boot, v4, 07/13] board: gdsys: Increase iocon and dlv10g version string
Tom Rini
- [U-Boot] [U-Boot, v4, 08/13] board: gdsys: Configure bridge on DP501 to support DDC only
Tom Rini
- [U-Boot] [U-Boot, v4, 09/13] board: gdsys: Make gdsys osd hardware detection more robust
Tom Rini
- [U-Boot] [U-Boot, v4, 10/13] board: gdsys: Enable scrambling on DP501
Tom Rini
- [U-Boot] [U-Boot, v4, 11/13] board: iocon: Modify iocon hardware startup
Tom Rini
- [U-Boot] [U-Boot, v4, 12/13] board: gdsys: Remove commands to reduce footprint
Tom Rini
- [U-Boot] [U-Boot,v4,13/13] fit: make sha256 support optional
Tom Rini
- [U-Boot] git-mailrc: Add sunxi custodians.
Tom Rini
- [U-Boot] kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabled
Tom Rini
- [U-Boot] cosmetic: doc: update README.generic-board
Tom Rini
- [U-Boot] Please pull u-boot-x86.git branch tom
Tom Rini
- [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings
Tom Rini
- [U-Boot] [PATCH] doc/README.falcon: Clarify steps slightly.
Tom Rini
- [U-Boot] cosmetic: doc: update README.generic-board
Tom Rini
- [U-Boot] [PATCH 3/7] mpc8xx: remove rbc823 board support
Tom Rini
- [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements
Tom Rini
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Tom Rini
- [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options
Tom Rini
- [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field
Tom Rini
- [U-Boot] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer
Tom Rini
- [U-Boot] [PULL]: small fixes from u-boot-imx
Tom Rini
- [U-Boot] [PATCH] doc: Add zynq fragment to git-mailrc file
Tom Rini
- [U-Boot] [PULL] u-boot/master
Tom Rini
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PATCH 1/3] sf: ops: Add spi_flash_copy_mmap function
Tom Rini
- [U-Boot] [PATCH 2/3] dma: Add TI EDMA driver
Tom Rini
- [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL
Tom Rini
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Tom Rini
- [U-Boot] [PATCH v1 0/25] Add Marvell Armada XP MV78460 SoC support
Tom Rini
- [U-Boot] [PATCH] ARM: DRA7xx: Update the board_name env variable
Tom Rini
- [U-Boot] [PATCH] socfpga: timer actually counts down
Tom Rini
- [U-Boot] [PATCH v2 1/2] boards.cfg: keep it sorted filling the board field
Tom Rini
- [U-Boot] [PATCH v2 2/2] boards.cfg: change "<none>" in the board field to "-"
Tom Rini
- [U-Boot] [PATCH] Fix help text of ext2load and fatload.
Tom Rini
- [U-Boot] [ANN] U-Boot v2014.07 released
Tom Rini
- [U-Boot] DM, Kconfig and clang changes
Tom Rini
- [U-Boot] DM, Kconfig and clang changes
Tom Rini
- [U-Boot] [ANN] U-Boot v2014.07 released
Tom Rini
- [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL
Tom Rini
- [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default
Tom Rini
- [U-Boot] [PATCH v1 1/7] TI: armv7: move board specific NAND configs out from ti_armv7_common.h and ti_am335x_common.h
Tom Rini
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Tom Rini
- [U-Boot] DM, Kconfig and clang changes
Tom Rini
- [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape
Tom Rini
- [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape
Tom Rini
- [U-Boot] [PATCH v1 3/7] arm: lib: continue board_init_r even if valid flash device is not detected
Tom Rini
- [U-Boot] [PATCH v1 6/7] board/ti/am43xx: add support for parallel NAND
Tom Rini
- [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND
Tom Rini
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Tom Rini
- [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot
Tom Rini
- [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND
Tom Rini
- [U-Boot] [PATCH 1/5] am335x_evm: Move SPL network defines
Tom Rini
- [U-Boot] [PATCH v3 2/5] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR
Tom Rini
- [U-Boot] [PATCH 3/5] tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND
Tom Rini
- [U-Boot] [PATCH 4/5] common/Makefile: Consolidate SPL ENV options, correct inclusion
Tom Rini
- [U-Boot] [PATCH 5/5] am335x_evm: Enable CONFIG_SPL_ENV_SUPPORT on EMMC_BOOT
Tom Rini
- [U-Boot] [PATCH] esd:cmd_loadpci.c: Switch from "do_source" to "source"
Tom Rini
- [U-Boot] mtd: cfi_flash: fix clang warning
Tom Rini
- [U-Boot] lib: div64: add missing include
Tom Rini
- [U-Boot] common: commands: make commands static
Tom Rini
- [U-Boot] common: board_f: cosmetic use __weak for leds
Tom Rini
- [U-Boot] dm: add missing includes
Tom Rini
- [U-Boot] common:splash: use __weak
Tom Rini
- [U-Boot] lib:lmb: use __weak
Tom Rini
- [U-Boot] common: main.c: make show_boot_progress __weak
Tom Rini
- [U-Boot] lib:sha1: remove unused constant
Tom Rini
- [U-Boot] env_callback.h: spl: mark callback as maybe_unused
Tom Rini
- [U-Boot] lib:vsprintf: reduce scope of pack_hex_byte
Tom Rini
- [U-Boot] dirvers: mmc: use __weak
Tom Rini
- [U-Boot] common: bootm_os: make arch_preboot_os __weak
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] yaffs2: cosmetic: remove self assignments
Tom Rini
- [U-Boot] [U-Boot,v2,2/2] yaffs2: preprocessor cleanup
Tom Rini
- [U-Boot] [U-Boot, v2] common: env_common: make env_get_char_spec __weak
Tom Rini
- [U-Boot] mmc: prevent some warnings with make W=1
Tom Rini
- [U-Boot] [U-Boot, v2] board: rpi_b: include mmc header and fix prototype
Tom Rini
- [U-Boot] autoboot: add its own header
Tom Rini
- [U-Boot] common: cmd_mii: fix printf format warning
Tom Rini
- [U-Boot] [i2c] Pull request
Tom Rini
- [U-Boot] [PATCH] esd:cmd_loadpci.c: Switch from "do_source" to "source"
Tom Rini
- [U-Boot] [PATCH] h2200: Disable SHA256 on FIT images
Tom Rini
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Tom Rini
- [U-Boot] [PATCH] boards.cfg: re-claim ownership for TQM8xx boards
Tom Rini
- [U-Boot] [PATCH] h2200: Disable SHA256 on FIT images
Tom Rini
- [U-Boot] [U-Boot,1/2] sparc: merge LEON3 linker scripts
Tom Rini
- [U-Boot] [U-Boot, 2/2] sparc: merge LEON2 and LEON3 linker scripts
Tom Rini
- [U-Boot] [U-Boot, v4, 1/2] linux/compat.h: port lower_32_bits and upper_32_bits from Linux
Tom Rini
- [U-Boot] [U-Boot, v4, 2/2] driver/usb: include upper/lower_32_bits() from linux/compat.h
Tom Rini
- [U-Boot] tools: compiler.h: add missing time.h
Tom Rini
- [U-Boot] Fix help text of ext2load and fatload.
Tom Rini
- [U-Boot] catch wrong load address passed to fatload / ext2load
Tom Rini
- [U-Boot] spl: nand: read only in the size of image_header on the first access
Tom Rini
- [U-Boot] bootp can use mdelay
Tom Rini
- [U-Boot] [U-Boot, 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case
Tom Rini
- [U-Boot] [U-Boot, 2/3] serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisor
Tom Rini
- [U-Boot] [U-Boot, 3/3] serial: ns16550: use a const variable instead of macro
Tom Rini
- [U-Boot] [U-Boot,1/2] common: cmd_ide: remove PIO mode
Tom Rini
- [U-Boot] [U-Boot, 2/2] common: cmd_ide: use __weak and add prototypes
Tom Rini
- [U-Boot] lib/time.c cleanups
Tom Rini
- [U-Boot] [U-Boot, 1/4] Add option -r to env import to allow import of text files with CRLF as line endings
Tom Rini
- [U-Boot] [U-Boot, 2/4] omap3_beagle: handle import of environments in files with CRLF as line endings
Tom Rini
- [U-Boot] [U-Boot, 3/4] am335x_evm: handle import of environments in files with CRLF as line endings
Tom Rini
- [U-Boot] [U-Boot, 4/4] rpi_b: handle import of environments in files with CRLF as line endings
Tom Rini
- [U-Boot] [U-Boot, 1/3] Makefile: fix the {c, e}tags/cscope build targets
Tom Rini
- [U-Boot] [U-Boot,2/3] Makefile: fix ctags/etags clean targets
Tom Rini
- [U-Boot] [U-Boot,3/3] Makefile: fix tags target documentation
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] add .mailmap for proper git-shortlog output
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] scripts: add mailmapper, a tool to create/update mailmap file
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] Update .mailmap using scripts/mailmapper
Tom Rini
- [U-Boot] .gitignore: clean-up unnecessary entries
Tom Rini
- [U-Boot] [U-Boot,1/3] AHCI: Increase link timeout to 200ms
Tom Rini
- [U-Boot] [U-Boot,2/3] board_r: run scsi init() on ARM too
Tom Rini
- [U-Boot] whitespace cleanups
Tom Rini
- [U-Boot] [PATCH 1/2] m68k: fix an undefined behavior warning of M5253DEMO board
Tom Rini
- [U-Boot] [PATCH 2/2] m68k: define __kernel_size_t as unsinged int again
Tom Rini
- [U-Boot] [PATCH 0/2] Now all the M68K boards can be cleanly built
Tom Rini
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Tom Rini
- [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework
Tom Rini
- [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()
Tom Rini
- [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation
Tom Rini
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Tom Rini
- [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size
Tom Rini
- [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check
Tom Rini
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Tom Rini
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Tom Rini
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Tom Rini
- [U-Boot] Please pull u-boot-dm.git
Tom Rini
- [U-Boot] Pull request: u-boot-sh/master
Tom Rini
- [U-Boot] pcm051: use ti_am335x_common.h config
Tom Rini
- [U-Boot] [PATCH 0/3] ARM: DRA72x: Add CPSW Ethernet support for DRA72x SoC
Tom Rini
- [U-Boot] [U-Boot, 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Tom Rini
- [U-Boot] [U-Boot, 1/3] drivers: net: cpsw: add support for using second port as ethernet
Tom Rini
- [U-Boot] [U-Boot,2/3] ARM: DRA7xx: Add cpsw second port pinmux
Tom Rini
- [U-Boot] [U-Boot, 3/3] ARM: dra7_evm: Add Ethernet support for dra72x platform
Tom Rini
- [U-Boot] [U-Boot, 1/2] power/pmic.h: Add prototype for power_init_board.
Tom Rini
- [U-Boot] [U-Boot, 2/2] tps65218/am43xx_evm: Add power framework support to TPS65218
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 2/3] keystone: add support for NAND gpheader image
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 3/3] k2hk_evm: add script to automate NAND flash process
Tom Rini
- [U-Boot] am335x_evm / gumstix pepper: Correct DDR settings
Tom Rini
- [U-Boot] tricorder: convert to generic board
Tom Rini
- [U-Boot] [U-Boot, 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c
Tom Rini
- [U-Boot] [U-Boot, 3/3] ARM: omap: tao3530: Convert to generic board
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 1/6] ARM: keystone2: psc: use common PSC base
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 5/6] keystone2: move cpu_to_bus() to keystone.c
Tom Rini
- [U-Boot] [U-Boot, U-boot, v2, 6/6] keystone2: add possibility to turn off all dsps
Tom Rini
- [U-Boot] [U-Boot, U-boot, 1/6] k2hk: use common KS2_ prefix for all hardware definitions
Tom Rini
- [U-Boot] [U-Boot, U-boot, 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory
Tom Rini
- [U-Boot] [U-Boot, U-boot, 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file
Tom Rini
- [U-Boot] [U-Boot, U-boot, 5/6] configs: k2hk_evm: config: add common EVM configuration header
Tom Rini
- [U-Boot] [U-Boot, U-boot, 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file
Tom Rini
- [U-Boot] [U-Boot, U-boot, 1/6] ARM: keystone2: add K2E SoC hardware definitions
Tom Rini
- [U-Boot] [U-Boot, U-boot, 1/6] ARM: keystone2: add K2E SoC hardware definitions
Tom Rini
- [U-Boot] [U-Boot, U-boot, 2/6] ARM: keystone2: clock: add K2E clock support
Tom Rini
- [U-Boot] [U-Boot, U-boot, 3/6] ARM: keystone2: add MSMC cache coherency support for K2E SOC
Tom Rini
- [U-Boot] [U-Boot, U-boot, 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places
Tom Rini
- [U-Boot] [U-Boot, U-boot, 5/6] ARM: keystone2: spl: add K2E SoC support
Tom Rini
- [U-Boot] [U-Boot,U-boot,6/6] board: k2e-evm: add board support
Tom Rini
- [U-Boot] ARM: OMAP: Fix handling of errata i727
Tom Rini
- [U-Boot] [U-Boot, v1, 1/3] ARM: omap: fix GPMC address-map size for NAND and NOR devices
Tom Rini
- [U-Boot] [U-Boot, v1, 2/3] ARM: omap: clean redundant PISMO_xx macros used in OMAP3
Tom Rini
- [U-Boot] [U-Boot, v1, 3/3] ARM: omap: move board specific NAND configs out from ti_armv7_common.h
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-x86.git branch patman
Tom Rini
- [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator
Tom Rini
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Tom Rini
- [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model
Tom Rini
- [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot
Tom Rini
- [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model
Tom Rini
- [U-Boot] Please pull u-boot-ppc4xx/master
Tom Rini
- [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] scripts: add scripts/show-gnu-make to get GNU Make command name
Tom Rini
- [U-Boot] [U-Boot,v2,2/3] MAKEALL: make sure to invoke GNU Make
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] buildman: make sure to invoke GNU Make
Tom Rini
- [U-Boot] cosmetic: boards.cfg: fix some maintainers fields
Tom Rini
- [U-Boot] boards.cfg : Add maintainers entries for SOCFPGA
Tom Rini
- [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot
Tom Rini
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Tom Rini
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Tom Rini
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Tom Rini
- [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model
Tom Rini
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Tom Rini
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Tom Rini
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Tom Rini
- [U-Boot] [PATCH v8 01/13] kconfig: import Kconfig files from Linux 3.16-rc7
Tom Rini
- [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files
Tom Rini
- [U-Boot] [PATCH v8 03/13] kconfig: add basic Kconfig files
Tom Rini
- [U-Boot] [PATCH v8 04/13] include: define CONFIG_SPL and CONFIG_TPL as 1
Tom Rini
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Tom Rini
- [U-Boot] [PATCH v8 06/13] Add board MAINTAINERS files
Tom Rini
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Tom Rini
- [U-Boot] [PATCH v8 08/13] kconfig: remove mkconfig and boards.cfg
Tom Rini
- [U-Boot] [PATCH v8 09/13] MAKEALL: adjust for Kconfig
Tom Rini
- [U-Boot] [PATCH v8 10/13] buildman: adjust for Kconfig
Tom Rini
- [U-Boot] [PATCH v8 11/13] kconfig: delete redundant CONFIG_${ARCH} definition
Tom Rini
- [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition
Tom Rini
- [U-Boot] [PATCH v8 13/13] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Tom Rini
- [U-Boot] [PATCH v8 0/13] Kconfig for U-Boot
Tom Rini
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Tom Rini
- [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings
Tom Rini
- [U-Boot] [PATCH] omap5912osk: change the status to Orphan
Tom Rini
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Tom Rini
- [U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag
Lubomir Rintel
- [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id
Stefan Roese
- [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files
Stefan Roese
- [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default
Stefan Roese
- [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
Stefan Roese
- [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE
Stefan Roese
- [U-Boot] [PATCH v3 0/13] Fixes on gdsys boards and some new functionality
Stefan Roese
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Stefan Roese
- [U-Boot] [PATCH 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c
Stefan Roese
- [U-Boot] [PATCH 3/3] ARM: omap: tao3530: Convert to generic board
Stefan Roese
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Stefan Roese
- [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms
Stefan Roese
- [U-Boot] [ANN] U-Boot v2014.07 released
Stefan Roese
- [U-Boot] [PATCH v1 1/2] ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
Stefan Roese
- [U-Boot] [PATCH v3 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v2 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver
Stefan Roese
- [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP
Stefan Roese
- [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver
Stefan Roese
- [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition
Stefan Roese
- [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP
Stefan Roese
- [U-Boot] Setting Uboot environment variables from within Linux
Rossco
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Lisovy Rostislav
- [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'
Lisovy Rostislav
- [U-Boot] [PATCH v2 4/9] Add a simple malloc() implementation for pre-relocation
Graeme Russ
- [U-Boot] ARMv8 spin-table patches
Mark Rutland
- [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page
Mark Rutland
- [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page
Mark Rutland
- [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page
Mark Rutland
- [U-Boot] ARMv8 spin-table patches
Mark Rutland
- [U-Boot] ARMv8 spin-table patches
Mark Rutland
- [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant
Otavio Salvador
- [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
Otavio Salvador
- [U-Boot] i.MX tree out of sync
Otavio Salvador
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Otavio Salvador
- [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
Benoit Sansoni
- [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
Benoit Sansoni
- [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
Benoit Sansoni
- [U-Boot] [PATCH v1 17/25] i2c: mvtwsi: Add support for Marvell Armada XP
Heiko Schocher
- [U-Boot] [PATCH v2 05/13] i2c: IHS I2C master driver
Heiko Schocher
- [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads
Heiko Schocher
- [U-Boot] [PATCH v3 05/13] i2c: IHS I2C master driver
Heiko Schocher
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
Heiko Schocher
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
Heiko Schocher
- [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD
Heiko Schocher
- [U-Boot] [PATCH v1 1/4] arm, imx6: add mxc_iomux_set_gpr_register function
Heiko Schocher
- [U-Boot] [PATCH v1 4/4] arm, imx6: add aristainetos board
Heiko Schocher
- [U-Boot] [PATCH v2 0/5] arm, imx6: add aristainetos board support
Heiko Schocher
- [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single
Heiko Schocher
- [U-Boot] [PATCH v2 2/5] imx6: add gpr2 usb_otg_id iomux select control define
Heiko Schocher
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Heiko Schocher
- [U-Boot] [PATCH v2 4/5] i.MX6: add enable_spi_clk()
Heiko Schocher
- [U-Boot] [PATCH v2 5/5] arm, imx6: add aristainetos board
Heiko Schocher
- [U-Boot] [patch 0/2] SPL: Lightweight UBI and UBI fastmap support
Heiko Schocher
- [U-Boot] [PATCH 1/4] mtdparts: fix usecount bug
Heiko Schocher
- [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single
Heiko Schocher
- [U-Boot] [PATCH 0/3] spi, sf: add mtdparts feature to spi and sf commands
Heiko Schocher
- [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver
Heiko Schocher
- [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place
Heiko Schocher
- [U-Boot] [PATCH 3/3] spi, sf: use offset and size in sf cmd from mtdpartition
Heiko Schocher
- [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single
Heiko Schocher
- [U-Boot] [PATCH v3] spi, spi_mxc: do not hang in spi_xchg_single
Heiko Schocher
- [U-Boot] DM, Kconfig and clang changes
Heiko Schocher
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Heiko Schocher
- [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines
Heiko Schocher
- [U-Boot] [PATCH v1 0/2] mtd,ubi,ubifs: sync with v3.15
Heiko Schocher
- [U-Boot] [PATCH v1 1/2] mtd, ubi, ubifs: update for the sync with linux v3.14
Heiko Schocher
- [U-Boot] [PATCH v1 2/2] mtd,ubi,ubifs: sync with linux v3.15
Heiko Schocher
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH v3 0/6] arm, imx6: add aristainetos board support
Heiko Schocher
- [U-Boot] [PATCH v3 1/6] imx6: add gpr2 usb_otg_id iomux select control define
Heiko Schocher
- [U-Boot] [PATCH v3 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines
Heiko Schocher
- [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6
Heiko Schocher
- [U-Boot] [PATCH v3 4/6] i.MX6: add enable_spi_clk()
Heiko Schocher
- [U-Boot] [PATCH v3 5/6] spi: add config option to enable the WP pin function on st micron flashes
Heiko Schocher
- [U-Boot] [PATCH v3 6/6] arm, imx6: add aristainetos board
Heiko Schocher
- [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6
Heiko Schocher
- [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver
Heiko Schocher
- [U-Boot] [PATCH v4 0/6] arm, imx6: add aristainetos board support
Heiko Schocher
- [U-Boot] [PATCH v4 1/6] imx6: add gpr2 usb_otg_id iomux select control define
Heiko Schocher
- [U-Boot] [PATCH v4 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines
Heiko Schocher
- [U-Boot] [PATCH v4 3/6] pwm, imx6: add support for pwm modul on imx6
Heiko Schocher
- [U-Boot] [PATCH v4 4/6] i.MX6: add enable_spi_clk()
Heiko Schocher
- [U-Boot] [PATCH v4 5/6] spi: add config option to enable the WP pin function on st micron flashes
Heiko Schocher
- [U-Boot] [PATCH v4 6/6] arm, imx6: add aristainetos board
Heiko Schocher
- [U-Boot] [PATCH v2 0/3] spi, sf: add mtdparts feature to spi and sf commands
Heiko Schocher
- [U-Boot] [PATCH v2 1/3] mtd, spi: add MTD layer driver
Heiko Schocher
- [U-Boot] [PATCH v2 2/3] mtd, nand: move common functions from cmd_nand.c to common place
Heiko Schocher
- [U-Boot] [PATCH v2 3/3] spi, sf: use offset and size in sf cmd from mtdpartition
Heiko Schocher
- [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver
Daniel Schwierzeck
- [U-Boot] [PATCH v1 0/4] introduce get_maintainer.pl
Daniel Schwierzeck
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15
Daniel Schwierzeck
- [U-Boot] [PATCH v1 3/4] get_maintainer.pl: adapt to U-Boot tree
Daniel Schwierzeck
- [U-Boot] [PATCH v1 4/4] get_maintainer.pl: add support for scanning multiple MAINTAINERS files
Daniel Schwierzeck
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version
Daniel Schwierzeck
- [U-Boot] [PATCH] socfpga: timer actually counts down
Chin Liang See
- [U-Boot] socfpga: initialize MMC
Chin Liang See
- [U-Boot] [PATCH] socfpga: cleanup socfpga_dw_mmc
Chin Liang See
- [U-Boot] [PATCHv2] socfpga: cleanup socfpga_dw_mmc
Chin Liang See
- [U-Boot] [PATCH] socfpga: Fix SOCFPGA build error for Altera dev kit
Chin Liang See
- [U-Boot] socfpga: initialize MMC
Chin Liang See
- [U-Boot] [PATCH 2/2] ARM: atmel: sama5d3xek: enable NOR flash support
Bo Shen
- [U-Boot] [PATCH] USB: gadget: atmel: zero out allocated requests
Bo Shen
- [U-Boot] [PATCH v2 0/2] ARM: atmel: sama5d3xek: enable NOR flash support
Bo Shen
- [U-Boot] [PATCH v2 1/2] ARM: atmel: sama5d3xek: add nor flash init function
Bo Shen
- [U-Boot] [PATCH v2 2/2] ARM: atmel: sama5d3xek: enable NOR flash support
Bo Shen
- [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields
Bo Shen
- [U-Boot] [PATCH 0/3] MMC: atmel: enable the features supported by MCI
Bo Shen
- [U-Boot] [PATCH 1/3] MMC: atmel_mci: refactor setting the mode register
Bo Shen
- [U-Boot] [PATCH 2/3] MMC: atmel_mci: add configuration register definition
Bo Shen
- [U-Boot] [PATCH 3/3] MMC: atmel_mci: enable high speed mode support
Bo Shen
- [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes
Siarhei Siamashka
- [U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function
Siarhei Siamashka
- [U-Boot] [PATCH 02/14] sunxi: dram: Remove broken super-standby remnants
Siarhei Siamashka
- [U-Boot] [PATCH 03/14] sunxi: dram: Respect the DDR3 reset timing requirements
Siarhei Siamashka
- [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling
Siarhei Siamashka
- [U-Boot] [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration
Siarhei Siamashka
- [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
Siarhei Siamashka
- [U-Boot] [PATCH 07/14] sunxi: dram: Use divisor P=1 for PLL5
Siarhei Siamashka
- [U-Boot] [PATCH 08/14] sunxi: dram: Improve DQS gate data training error handling
Siarhei Siamashka
- [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
Siarhei Siamashka
- [U-Boot] [PATCH 10/14] sunxi: dram: Configurable DQS gating window mode and delay
Siarhei Siamashka
- [U-Boot] [PATCH 11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13)
Siarhei Siamashka
- [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
Siarhei Siamashka
- [U-Boot] [PATCH 13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed
Siarhei Siamashka
- [U-Boot] [PATCH 14/14] sunxi: dram: Autodetect DDR3 bus width and density
Siarhei Siamashka
- [U-Boot] [PATCH 0/2] sunxi: FEL boot mode improvements
Siarhei Siamashka
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Siarhei Siamashka
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Siarhei Siamashka
- [U-Boot] Please pull u-boot-sunxi.git/master
Siarhei Siamashka
- [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4
Siarhei Siamashka
- [U-Boot] [PATCH v3 03/10] sunxi: Remove mmc DMA support
Siarhei Siamashka
- [U-Boot] [PATCH v3 04/10] sunxi: Implement reset_cpu
Siarhei Siamashka
- [U-Boot] [PATCH v3 05/10] sunxi: Add sun4i support
Siarhei Siamashka
- [U-Boot] [PATCH v3 06/10] sunxi: Add sun5i support
Siarhei Siamashka
- [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver
Siarhei Siamashka
- [U-Boot] [PATCH v3 08/10] sunxi: Add emac glue, enable emac on the cubieboard
Siarhei Siamashka
- [U-Boot] [PATCH v3 09/10] sunxi: Add support for using MII phy-s with the GMAC nic
Siarhei Siamashka
- [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support
Siarhei Siamashka
- [U-Boot] [PATCH v2 5/5] sunxi: Fix reset hang on sun5i
Siarhei Siamashka
- [U-Boot] [PATCH] sunxi: use random parts of SID to set ethaddr
Siarhei Siamashka
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Siarhei Siamashka
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Siarhei Siamashka
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Siarhei Siamashka
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Siarhei Siamashka
- [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode
Siarhei Siamashka
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Siarhei Siamashka
- [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode
Siarhei Siamashka
- [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling
Siarhei Siamashka
- [U-Boot] [linux-sunxi] Re: [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration
Siarhei Siamashka
- [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
Siarhei Siamashka
- [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
Siarhei Siamashka
- [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
Siarhei Siamashka
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Siarhei Siamashka
- [U-Boot] [PATCH] doc: Add zynq fragment to git-mailrc file
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Show ECC status on the same line as DRAM size
Michal Simek
- [U-Boot] [PATCH v2] zynq: disable -Wstrict-prototypes option for ps7_init.c
Michal Simek
- [U-Boot] [GIT PULL] Zynq patches
Michal Simek
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Michal Simek
- [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb
York Sun
- [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page
York Sun
- [U-Boot] ARMv8 spin-table patches
York Sun
- [U-Boot] CPU Wachtog for P2041
York Sun
- [U-Boot] [PATCH] net: phy/cortina: Add four phy addresses support
York Sun
- [U-Boot] [PATCH] net: phy/cortina: Add four phy addresses support
York Sun
- [U-Boot] [PATCH v5] net/phy: Add support for CS4315/CS4340 PHY
York Sun
- [U-Boot] CPU Wachtog for P2041
York Sun
- [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled
York Sun
- [U-Boot] [PATCH v2 01/10] arm: ls102xa: Add Freescale LS102xA SoC support
York Sun
- [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers
York Sun
- [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers
York Sun
- [U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2
York Sun
- [U-Boot] [PATCH] powerpc/t104xrdb: Add T1042RDB board support
York Sun
- [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
York Sun
- [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB
York Sun
- [U-Boot] Please pull u-boot-mpc85xx master
York Sun
- [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled
York Sun
- [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled
York Sun
- [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards
York Sun
- [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards
York Sun
- [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards
York Sun
- [U-Boot] uboot/odroid test report
Marek Szyprowski
- [U-Boot] [PATCH v1 01/25] sf: Add M25PX64 SPI NOR flash ID
Jagan Teki
- [U-Boot] [PATCH v1 02/25] arm: kirkwood: spi.h: Add some missing parenthesis
Jagan Teki
- [U-Boot] [PATCH v1 03/25] spi: kirkwood_spi.c: Some fixes and cleanup
Jagan Teki
- [U-Boot] [PATCH v1 04/25] spi: kirkwood_spi.c: Make global variable static
Jagan Teki
- [U-Boot] [PATCH v1 05/25] spi: kirkwood_spi.c: cosmetic: Fix minor coding style issues
Jagan Teki
- [U-Boot] [PATCH] README: document CONFIG_ENV_IS_IN_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH] sf: Stop leaking memory
Jagan Teki
- [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single
Jagan Teki
- [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL
Jagan Teki
- [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation
Jagan Teki
- [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time
Jagan Teki
- [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode
Jagan Teki
- [U-Boot] [PATCH] sf: Stop leaking memory
Jagan Teki
- [U-Boot] [PATCH v1 0/25] Add Marvell Armada XP MV78460 SoC support
Jagan Teki
- [U-Boot] [PATCH v1 08/25] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h
Jagan Teki
- [U-Boot] [PATCH v1 11/25] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's
Jagan Teki
- [U-Boot] [PATCH v1 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE
Jagan Teki
- [U-Boot] [PATCH v1 01/25] sf: Add M25PX64 SPI NOR flash ID
Jagan Teki
- [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single
Jagan Teki
- [U-Boot] [PATCH v3] spi, spi_mxc: do not hang in spi_xchg_single
Jagan Teki
- [U-Boot] [PATCH v2 4/5] i.MX6: add enable_spi_clk()
Jagan Teki
- [U-Boot] SPL broken on i.mx31 platforms
Benoît Thébaudeau
- [U-Boot] SPL broken on i.mx31 platforms
Benoît Thébaudeau
- [U-Boot] SPL broken on i.mx31 platforms
Benoît Thébaudeau
- [U-Boot] SPL broken on i.mx31 platforms
Benoît Thébaudeau
- [U-Boot] SPL broken on i.mx31 platforms
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Michael Trimarchi
- [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
Chen-Yu Tsai
- [U-Boot] [PATCH] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Marek Vasut
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] sf: Stop leaking memory
Marek Vasut
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Marek Vasut
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Marek Vasut
- [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms
Marek Vasut
- [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too
Marek Vasut
- [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms
Marek Vasut
- [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too
Marek Vasut
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options
Marek Vasut
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Marek Vasut
- [U-Boot] [PULL] u-boot/master
Marek Vasut
- [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Marek Vasut
- [U-Boot] [PATCH] Fix help text of ext2load and fatload.
Marek Vasut
- [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load
Marek Vasut
- [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x
Marek Vasut
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Marek Vasut
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Marek Vasut
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Marek Vasut
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Marek Vasut
- [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls
Marek Vasut
- [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods
Marek Vasut
- [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'
Marek Vasut
- [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function
Marek Vasut
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Marek Vasut
- [U-Boot] [PATCH] bootp can use mdelay
Marek Vasut
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Marek Vasut
- [U-Boot] [PATCH] socfpga: initialize designware ethernet
Marek Vasut
- [U-Boot] [PATCH] socfpga: initialize designware ethernet
Marek Vasut
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Marek Vasut
- [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address
Marek Vasut
- [U-Boot] [PATCH 3/3] serial: ns16550: use a const variable instead of macro
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Scrub useless ifdef
Marek Vasut
- [U-Boot] [PATCH] lib/time.c cleanups
Marek Vasut
- [U-Boot] [PATCH] socfpga: timer actually counts down
Marek Vasut
- [U-Boot] [PATCHv2] socfpga: initialize designware ethernet
Marek Vasut
- [U-Boot] [PATCHv3] socfpga: initialize designware ethernet
Marek Vasut
- [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Marek Vasut
- [U-Boot] [YBA] mx28evk.h CONFIG_EHCI_MXS_PORT0 power?
Marek Vasut
- [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support
Marek Vasut
- [U-Boot] [ANN] U-Boot v2014.07 released
Marek Vasut
- [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs
Marek Vasut
- [U-Boot] [patch] socfpga: fix clock manager register definition
Marek Vasut
- [U-Boot] [patch] socfpga: fix clock manager register definition
Marek Vasut
- [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support
Marek Vasut
- [U-Boot] [PATCH 02/12] arm: s3c24xx: Fix incorrect CONFIG_SYS_S3C2410_NAND_HWECC name
Marek Vasut
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Marek Vasut
- [U-Boot] [PATCH 04/12] mtd: nand: s3c: Unify the register definition and naming
Marek Vasut
- [U-Boot] [PATCH 05/12] mtd: nand: s3c: Add S3C2440 specifics
Marek Vasut
- [U-Boot] [PATCH 06/12] mtd: nand: s3c: Add S3C2440 buffer reading
Marek Vasut
- [U-Boot] [PATCH 07/12] mtd: nand: s3c: Add missing correction and select_chip functions
Marek Vasut
- [U-Boot] [PATCH 08/12] i2c: s3c: Implant support for S3C2440
Marek Vasut
- [U-Boot] [PATCH 09/12] gpio: s3c: Fix the GPIO driver
Marek Vasut
- [U-Boot] [PATCH 10/12] arm: s3c: Unify the S3C24xx SDI structure
Marek Vasut
- [U-Boot] [PATCH 11/12] mmc: s3c: Add SD driver
Marek Vasut
- [U-Boot] [PATCH 12/12] net: smc911x: Keep MAC programmed
Marek Vasut
- [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation
Marek Vasut
- [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Marek Vasut
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Marek Vasut
- [U-Boot] [PATCH] arm: m53evk: Fix RTC bus number
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix RTC bus number
Marek Vasut
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: rmobile: Remove xHCI address
Marek Vasut
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Marek Vasut
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Marek Vasut
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Marek Vasut
- [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC
Marek Vasut
- [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions
Marek Vasut
- [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command
Marek Vasut
- [U-Boot] [PATCH v3 3/4] usb/gadget: fastboot: add support for flash command
Marek Vasut
- [U-Boot] [PATCH v3 4/4] usb/gadget: fastboot: minor cleanup
Marek Vasut
- [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd
Marek Vasut
- [U-Boot] Random number generator - why I need it
Stanislav Vlasic
- [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer
Lokesh Vutla
- [U-Boot] [PATCH] ARM: DRA7xx: Update the board_name env variable
Lokesh Vutla
- [U-Boot] [PATCH] ARM: OMAP: Fix handling of errata i727
Lokesh Vutla
- [U-Boot] [PATCH] ARM: DRA7: Enable software leveling for dra7
Lokesh Vutla
- [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator
Lokesh Vutla
- [U-Boot] [PATCH] ARM: DRA7: Enable software leveling for dra7
Lokesh Vutla
- [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default
Prafulla Wadaskar
- [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
Prafulla Wadaskar
- [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files
Prafulla Wadaskar
- [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id
Prafulla Wadaskar
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support
Alison Wang
- [U-Boot] [PATCH v2 01/10] arm: ls102xa: Add Freescale LS102xA SoC support
Alison Wang
- [U-Boot] [PATCH v2 02/10] arm: ls102xa: Add i2c support for LS102xA
Alison Wang
- [U-Boot] [PATCH v2 03/10] net: Merge asm/fsl_enet.h into fsl_mdio.h
Alison Wang
- [U-Boot] [PATCH v2 04/10] arm: ls102xa: Add etsec support for LS102xA
Alison Wang
- [U-Boot] [PATCH v2 05/10] arm: ls102xa: Add esdhc support for LS102xA
Alison Wang
- [U-Boot] [PATCH v2 06/10] driver/ddr/freescale: Add support of accumulate ECC
Alison Wang
- [U-Boot] [PATCH v2 07/10] driver/ddr/freescale: Fix DDR3 driver for ARM
Alison Wang
- [U-Boot] [PATCH v2 08/10] driver/ddr/fsl: Add support of overriding chip select write leveling
Alison Wang
- [U-Boot] [PATCH v2 09/10] arm: ls102xa: Add basic support for LS1021AQDS board
Alison Wang
- [U-Boot] [PATCH v2 10/10] arm: ls102xa: Add basic support for LS1021ATWR board
Alison Wang
- [U-Boot] [PATCH v1 0/2] Add SD boot support for LS1021AQDS/TWR board
Alison Wang
- [U-Boot] [PATCH 1/2] arm: ls102xa: Add SD boot support for LS1021AQDS board
Alison Wang
- [U-Boot] [PATCH 2/2] arm: ls102xa: Add SD boot support for LS1021ATWR board
Alison Wang
- [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Stephen Warren
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Stephen Warren
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Stephen Warren
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Stephen Warren
- [U-Boot] [PATCH 1/6] usb: ci_udc: fix ci_flush_{qh, qtd} calls in ci_udc_probe()
Stephen Warren
- [U-Boot] [PATCH 2/6] usb: ci_udc: don't assume QTDs are adjacent when transmitting ZLPs
Stephen Warren
- [U-Boot] [PATCH 3/6] usb: ci_udc: lift ilist size calculations to global scope
Stephen Warren
- [U-Boot] [PATCH 4/6] usb: ci_udc: fix items array size/stride calculation
Stephen Warren
- [U-Boot] [PATCH 5/6] usb: ci_udc: remove controller.items array
Stephen Warren
- [U-Boot] [PATCH 6/6] usb: ci_udc: don't memalign() struct ci_req allocations
Stephen Warren
- [U-Boot] [PATCH 1/3] test: dfu: cleanup before execution
Stephen Warren
- [U-Boot] [PATCH 2/3] test: dfu: add some more test cases
Stephen Warren
- [U-Boot] [PATCH 3/3] dfu: fix readback buffer overflow test
Stephen Warren
- [U-Boot] [PATCH] usb: ci_udc: use var name ep/ci_ep consistently
Stephen Warren
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Stephen Warren
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Stephen Warren
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Stephen Warren
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Stephen Warren
- [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups
Stephen Warren
- [U-Boot] [PATCH] USB: gadget: atmel: zero out allocated requests
Stephen Warren
- [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly
Stephen Warren
- [U-Boot] Fwd: Debian platform firmware strategy?
Stephen Warren
- [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Stephen Warren
- [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads
Stephen Warren
- [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation
Stephen Warren
- [U-Boot] [PATCH] pxe: clear Bootfile before returning
Stephen Warren
- [U-Boot] [PATCH] pxe: clear Bootfile before returning
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: enable DFU too
Stephen Warren
- [U-Boot] [PATCH] net: BOOTP retry timeout improvements
Stephen Warren
- [U-Boot] Refactoring of U-Boot directory structure
Stephen Warren
- [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation
Stephen Warren
- [U-Boot] Driver Model and DTS Parsing
Stephen Warren
- [U-Boot] Driver Model and DTS Parsing
Stephen Warren
- [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd
Stephen Warren
- [U-Boot] [PATCH 2/3] ARM: tegra: use new generic $bootcmd
Stephen Warren
- [U-Boot] [PATCH 3/3] ARM: rpi_b: use new generic $bootcmd
Stephen Warren
- [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings
Stephen Warren
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Stephen Warren
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Stephen Warren
- [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd
Stephen Warren
- [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz
Stephen Warren
- [U-Boot] Driver Model and DTS Parsing
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support
Stephen Warren
- [U-Boot] [PATCH] lib: lmb: fix overflow in __lmb_alloc_base w/ large RAM
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA
Stephen Warren
- [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings
Stephen Warren
- [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details
Stephen Warren
- [U-Boot] [PATCH v3 15/16] RFC: dm: tegra: Enable driver model for serial
Stephen Warren
- [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node
Stephen Warren
- [U-Boot] [PATCH v3 16/16] dm: tegra: Use V_NS16550_CLK only in SPL builds
Stephen Warren
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Stephen Warren
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Scott Wood
- [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14
Scott Wood
- [U-Boot] SPL with NAND: programming addresses
Scott Wood
- [U-Boot] ARMv8 spin-table patches
Scott Wood
- [U-Boot] [U-boot] question about nand_scan_bbt()
Scott Wood
- [U-Boot] [PATCH] driver/mtd: Use generic timer API for FSL IFC, eLBC
Scott Wood
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Scott Wood
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Scott Wood
- [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()
Scott Wood
- [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place
Scott Wood
- [U-Boot] [PATCH] [blackfin] bf609: add register define required by core B on dual core BF609 processor
Aaron Wu
- [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz
Bryan Wu
- [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz
Bryan Wu
- [U-Boot] [PATCH] README: document CONFIG_ENV_IS_IN_SPI_FLASH
Josh Wu
- [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers
Shaohui Xie
- [U-Boot] [PATCH] powerpc/T4240QDS/eth: fix for XFI
Shaohui Xie
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Masahiro YAMADA
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Masahiro YAMADA
- [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output
Masahiro YAMADA
- [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE
Masahiro Yamada
- [U-Boot] [PATCH 0/6] Add support for Panasonic UniPhier SoCs/boards
Masahiro Yamada
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Masahiro Yamada
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Masahiro Yamada
- [U-Boot] [PATCH 3/6] arm: uniphier: add UniPhier SoC suppurt code
Masahiro Yamada
- [U-Boot] [PATCH 4/6] arm: uniphier: add UniPhier config headers
Masahiro Yamada
- [U-Boot] [PATCH 5/6] arm: uniphier: add board entries to boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH 6/6] git-mailrc: add me as the maintainer of UniPhier SoCs
Masahiro Yamada
- [U-Boot] [PATCH] buildman: fix to display warning message for missing [toolchain] section
Masahiro Yamada
- [U-Boot] [PATCH] buildman: fix toolchain priority_list
Masahiro Yamada
- [U-Boot] [Question] Any plan to refactor Generic Board Framework?
Masahiro Yamada
- [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support
Masahiro Yamada
- [U-Boot] [PATCH] cosmetic: doc: update README.generic-board
Masahiro Yamada
- [U-Boot] [PATCH] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists
Masahiro Yamada
- [U-Boot] [Question] Any plan to refactor Generic Board Framework?
Masahiro Yamada
- [U-Boot] CONFIG_SYS_GENERIC_BOARD status
Masahiro Yamada
- [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field
Masahiro Yamada
- [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field
Masahiro Yamada
- [U-Boot] CONFIG_SYS_GENERIC_BOARD status
Masahiro Yamada
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Masahiro Yamada
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Masahiro Yamada
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Masahiro Yamada
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Masahiro Yamada
- [U-Boot] [PATCH] spl: nand: read only in the size of image_header on the first access
Masahiro Yamada
- [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL
Masahiro Yamada
- [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] boards.cfg: keep it sorted filling the board field
Masahiro Yamada
- [U-Boot] [PATCH v2 2/2] boards.cfg: change "<none>" in the board field to "-"
Masahiro Yamada
- [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field
Masahiro Yamada
- [U-Boot] [PATCH 0/3] Collection of ns16550 UART driver refactoring
Masahiro Yamada
- [U-Boot] [PATCH 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case
Masahiro Yamada
- [U-Boot] [PATCH 2/3] serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisor
Masahiro Yamada
- [U-Boot] [PATCH 3/3] serial: ns16550: use a const variable instead of macro
Masahiro Yamada
- [U-Boot] [PATCH 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case
Masahiro Yamada
- [U-Boot] [PATCH v8] nand/denali: Adding Denali NAND driver support
Masahiro Yamada
- [U-Boot] [PATCH 0/3] Add .mailmap file and a tool to maintain it
Masahiro Yamada
- [U-Boot] [PATCH 1/3] add .mailmap for proper git-shortlog output
Masahiro Yamada
- [U-Boot] [PATCH 2/3] scripts: add mailmapper, a tool to create/update mailmap file
Masahiro Yamada
- [U-Boot] [PATCH 3/3] Update .mailmap using scripts/mailmapper
Masahiro Yamada
- [U-Boot] [PATCH v2 0/3] Add .mailmap file and a tool to maintain it
Masahiro Yamada
- [U-Boot] [PATCH v2 1/3] add .mailmap for proper git-shortlog output
Masahiro Yamada
- [U-Boot] [PATCH v2 2/3] scripts: add mailmapper, a tool to create/update mailmap file
Masahiro Yamada
- [U-Boot] [PATCH v2 3/3] Update .mailmap using scripts/mailmapper
Masahiro Yamada
- [U-Boot] DM, Kconfig and clang changes
Masahiro Yamada
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Masahiro Yamada
- [U-Boot] [PATCH] .gitignore: clean-up unnecessary entries
Masahiro Yamada
- [U-Boot] [PATCH 0/3] Do not hard-code the command name 'make' in upper-level tools
Masahiro Yamada
- [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command
Masahiro Yamada
- [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make
Masahiro Yamada
- [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make
Masahiro Yamada
- [U-Boot] [PATCH] patman: make "No recipient" checking more tolerant
Masahiro Yamada
- [U-Boot] [PATCH 0/2] Now all the M68K boards can be cleanly built
Masahiro Yamada
- [U-Boot] [PATCH 1/2] m68k: fix an undefined behavior warning of M5253DEMO board
Masahiro Yamada
- [U-Boot] [PATCH 2/2] m68k: define __kernel_size_t as unsinged int again
Masahiro Yamada
- [U-Boot] [PATCH v2 0/3] Do not hard-code the command name 'make' in higher-level tools
Masahiro Yamada
- [U-Boot] [PATCH v2 1/3] scripts: add scripts/show-gnu-make to get GNU Make command name
Masahiro Yamada
- [U-Boot] [PATCH v2 2/3] MAKEALL: make sure to invoke GNU Make
Masahiro Yamada
- [U-Boot] [PATCH v2 3/3] buildman: make sure to invoke GNU Make
Masahiro Yamada
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Masahiro Yamada
- [U-Boot] m68k: Build problems on some boards
Masahiro Yamada
- [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command
Masahiro Yamada
- [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields
Masahiro Yamada
- [U-Boot] [PATCH 0/10] Drop mpc8xx, mpc82xx boards which are orphaned or have no maintainers
Masahiro Yamada
- [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers
Masahiro Yamada
- [U-Boot] [PATCH 02/10] powerpc: mpc8260: remove ppmc8260 board support
Masahiro Yamada
- [U-Boot] [PATCH 03/10] powerpc: mpc824x: remove MUSENKI and Sandpoint8245 board support
Masahiro Yamada
- [U-Boot] [PATCH 04/10] powerpc: mpc8xx: remove stxxtc board support
Masahiro Yamada
- [U-Boot] [PATCH 05/10] powerpc: mpc8xx: remove svm_sc8xx board
Masahiro Yamada
- [U-Boot] [PATCH 06/10] powerpc: mpc8xx: remove SXNI855T board support
Masahiro Yamada
- [U-Boot] [PATCH 07/10] powerpc: mpc8xx: remove GEN860T, GEN806T_SC board support
Masahiro Yamada
- [U-Boot] [PATCH 08/10] powerpc: mpc8xx: remove FLAGADM board support
Masahiro Yamada
- [U-Boot] [PATCH 09/10] powerpc: mpc8260: remove sacsng board support
Masahiro Yamada
- [U-Boot] [PATCH 10/10] powerpc: mpc8260: remove ep8260 board support
Masahiro Yamada
- [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers
Masahiro Yamada
- [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers
Masahiro Yamada
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v4 01/15] kconfig: import Kconfig files from Linux 3.16-rc6
Masahiro Yamada
- [U-Boot] [PATCH v4 02/15] Do not apply: tools: add genkconfig
Masahiro Yamada
- [U-Boot] [PATCH v4 03/15] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v4 04/15] kconfig: add basic Kconfig files
Masahiro Yamada
- [U-Boot] [PATCH v4 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1
Masahiro Yamada
- [U-Boot] [PATCH v4 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v4 07/15] Do not apply: tools: add gen_maintainers.py
Masahiro Yamada
- [U-Boot] [PATCH v4 08/15] Add MAINTAINERS files
Masahiro Yamada
- [U-Boot] [PATCH v4 09/15] tools: add genboardscfg
Masahiro Yamada
- [U-Boot] [PATCH v4 10/15] kconfig: remove mkconfig and boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH v4 11/15] MAKEALL: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v4 12/15] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v4 13/15] kconfig: delete redundant CONFIG_${ARCH} definition
Masahiro Yamada
- [U-Boot] [PATCH v4 14/15] powerpc: remove redundant CPU definition
Masahiro Yamada
- [U-Boot] [PATCH v4 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Masahiro Yamada
- [U-Boot] Please update doc/git-mailrc
Masahiro Yamada
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Masahiro Yamada
- [U-Boot] [PATCH] ARM: zynq: Enable generic board for Xilinx Zynq
Masahiro Yamada
- [U-Boot] [PATCH] ARM: zynq: Show ECC status on the same line as DRAM size
Masahiro Yamada
- [U-Boot] [PATCH v2] zynq: disable -Wstrict-prototypes option for ps7_init.c
Masahiro Yamada
- [U-Boot] [PATCH v5 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v5 01/15] kconfig: import Kconfig files from Linux 3.16-rc6
Masahiro Yamada
- [U-Boot] [PATCH v5 02/15] Do not apply: tools: add genkconfig
Masahiro Yamada
- [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v5 04/15] kconfig: add basic Kconfig files
Masahiro Yamada
- [U-Boot] [PATCH v5 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1
Masahiro Yamada
- [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v5 07/15] Do not apply: tools: add gen_maintainers.py
Masahiro Yamada
- [U-Boot] [PATCH v5 08/15] Add MAINTAINERS files
Masahiro Yamada
- [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v5 10/15] kconfig: remove mkconfig and boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v5 13/15] kconfig: delete redundant CONFIG_${ARCH} definition
Masahiro Yamada
- [U-Boot] [PATCH v5 14/15] powerpc: remove redundant CPU definition
Masahiro Yamada
- [U-Boot] [PATCH v5 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Masahiro Yamada
- [U-Boot] A way to change the status of the whole series on Patchwork ?
Masahiro Yamada
- [U-Boot] [PATCH v6 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v6 01/15] kconfig: import Kconfig files from Linux 3.16-rc6
Masahiro Yamada
- [U-Boot] [PATCH v6 02/15] Do not apply: tools: add genkconfig
Masahiro Yamada
- [U-Boot] [PATCH v6 03/15] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v6 04/15] kconfig: add basic Kconfig files
Masahiro Yamada
- [U-Boot] [PATCH v6 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1
Masahiro Yamada
- [U-Boot] [PATCH v6 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v6 07/15] Do not apply: tools: add gen_maintainers.py
Masahiro Yamada
- [U-Boot] [PATCH v6 08/15] Add MAINTAINERS files
Masahiro Yamada
- [U-Boot] [PATCH v6 09/15] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v6 10/15] kconfig: remove mkconfig and boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH v6 11/15] MAKEALL: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v6 12/15] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v6 13/15] kconfig: delete redundant CONFIG_${ARCH} definition
Masahiro Yamada
- [U-Boot] [PATCH v6 14/15] powerpc: remove redundant CPU definition
Masahiro Yamada
- [U-Boot] [PATCH v6 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Masahiro Yamada
- [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version
Masahiro Yamada
- [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v7 01/15] kconfig: import Kconfig files from Linux 3.16-rc7
Masahiro Yamada
- [U-Boot] [PATCH v7 02/15] Do not apply: tools: add genkconfig
Masahiro Yamada
- [U-Boot] [PATCH v7 03/15] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v7 04/15] kconfig: add basic Kconfig files
Masahiro Yamada
- [U-Boot] [PATCH v7 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1
Masahiro Yamada
- [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v7 07/15] Do not apply: tools: add gen_maintainers.py
Masahiro Yamada
- [U-Boot] [PATCH v7 08/15] Add board MAINTAINERS files
Masahiro Yamada
- [U-Boot] [PATCH v7 09/15] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v7 10/15] kconfig: remove mkconfig and boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH v7 11/15] MAKEALL: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v7 12/15] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v7 13/15] kconfig: delete redundant CONFIG_${ARCH} definition
Masahiro Yamada
- [U-Boot] [PATCH v7 14/15] powerpc: remove redundant CPU definition
Masahiro Yamada
- [U-Boot] [PATCH v7 15/15] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Masahiro Yamada
- [U-Boot] [PATCH] cosmetic: update doc/README.scrapyard
Masahiro Yamada
- [U-Boot] DM, Kconfig and clang changes
Masahiro Yamada
- [U-Boot] DM, Kconfig and clang changes
Masahiro Yamada
- [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v8 0/13] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v8 01/13] kconfig: import Kconfig files from Linux 3.16-rc7
Masahiro Yamada
- [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files
Masahiro Yamada
- [U-Boot] [PATCH v8 03/13] kconfig: add basic Kconfig files
Masahiro Yamada
- [U-Boot] [PATCH v8 04/13] include: define CONFIG_SPL and CONFIG_TPL as 1
Masahiro Yamada
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v8 06/13] Add board MAINTAINERS files
Masahiro Yamada
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] [PATCH v8 08/13] kconfig: remove mkconfig and boards.cfg
Masahiro Yamada
- [U-Boot] [PATCH v8 09/13] MAKEALL: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v8 10/13] buildman: adjust for Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v8 11/13] kconfig: delete redundant CONFIG_${ARCH} definition
Masahiro Yamada
- [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition
Masahiro Yamada
- [U-Boot] [PATCH v8 13/13] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Masahiro Yamada
- [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version
Masahiro Yamada
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version
Masahiro Yamada
- [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot
Masahiro Yamada
- [U-Boot] Please fix warning of Exynos
Masahiro Yamada
- [U-Boot] Please fix warning of gw_ventana board
Masahiro Yamada
- [U-Boot] [PATCH] omap: clean-up dead configs
Masahiro Yamada
- [U-Boot] [PATCH] drivers: rtc: remove dead drivers
Masahiro Yamada
- [U-Boot] [PATCH] drivers: net: remove dead drivers
Masahiro Yamada
- [U-Boot] [PATCH] test mail
Masahiro Yamada
- [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py
Masahiro Yamada
- [U-Boot] Please pick up the maintainership on orphan boards
Masahiro Yamada
- [U-Boot] Please pull u-boot-sunxi.git/master
Masahiro Yamada
- [U-Boot] Quick guide to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH] omap5912osk: change the status to Orphan
Masahiro Yamada
- [U-Boot] Quick guide to Kconfig
Masahiro Yamada
- [U-Boot] Please pull u-boot-sunxi.git/master
Masahiro Yamada
- [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler
Masahiro Yamada
- [U-Boot] [PATCH] mpc85xx/t104x: Enable L2 and CPC cache when resume
Tang Yuantian
- [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE
Zhang, Sonic
- [U-Boot] [PATCH 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions
Sonic Zhang
- [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f
Sonic Zhang
- [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f
Sonic Zhang
- [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f
Sonic Zhang
- [U-Boot] [PATCH v2 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions
Sonic Zhang
- [U-Boot] [PATCH v2 2/2] support blackfin board initialization in generic board_f
Sonic Zhang
- [U-Boot] [PATCH] [blackfin] bf609: add register define required by core B on dual core BF609 processor
Sonic Zhang
- [U-Boot] Requesting a custodian tree for sunxi (Allwinner) maintenance
Detlev Zundel
- [U-Boot] [PATCH] boards.cfg : Add maintainers entries for SOCFPGA
dinguyen at altera.com
- [U-Boot] mini2440 u boot executing from NAND
dashy1981
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver
drEagle
- [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.
Li.Xiubo at freescale.com
- [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.
Li.Xiubo at freescale.com
- [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7
Li.Xiubo at freescale.com
- [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region
Li.Xiubo at freescale.com
- [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7
Li.Xiubo at freescale.com
- [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.
Li.Xiubo at freescale.com
- [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb
Shengzhou.Liu at freescale.com
- [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Make boot flag effective
Yuantian.Tang at freescale.com
- [U-Boot] [PATCH 2/2] powerpc/t104xrdb: support deep sleep in SPI/SD boot
Yuantian.Tang at freescale.com
- [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page
arnab.basu at freescale.com
- [U-Boot] [PATCH v2 0/13] Fixes on gdsys boards and some new functionality
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 01/13] board: controlcenterd: Fix pci access
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 03/13] board: controlcenterd: Use new API for setting i2c bus
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 04/13] board: iocon: Support DisplayPort hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 05/13] i2c: IHS I2C master driver
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 06/13] board: gdsys: Fix dlvision-10g I2C configuration
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 07/13] board: gdsys: Increase iocon and dlv10g version string
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 08/13] board: gdsys: Configure bridge on DP501 to support DDC only
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 09/13] board: gdsys: Make gdsys osd hardware detection more robust
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 10/13] board: gdsys: Enable scrambling on DP501
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 11/13] board: iocon: Modify iocon hardware startup
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 12/13] board: gdsys: Remove commands to reduce footprint
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 13/13] fit: make sha256 support optional
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 0/13] Fixes on gdsys boards and some new functionality
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 01/13] board: controlcenterd: Fix pci access
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 03/13] board: controlcenterd: Use new API for setting i2c bus
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 04/13] board: iocon: Support DisplayPort hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 05/13] i2c: IHS I2C master driver
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 06/13] board: gdsys: Fix dlvision-10g I2C configuration
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 07/13] board: gdsys: Increase iocon and dlv10g version string
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 08/13] board: gdsys: Configure bridge on DP501 to support DDC only
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 09/13] board: gdsys: Make gdsys osd hardware detection more robust
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 10/13] board: gdsys: Enable scrambling on DP501
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 11/13] board: iocon: Modify iocon hardware startup
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 12/13] board: gdsys: Remove commands to reduce footprint
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 01/13] board: controlcenterd: Fix pci access
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 03/13] board: controlcenterd: Use new API for setting i2c bus
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 04/13] board: iocon: Support DisplayPort hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 05/13] i2c: IHS I2C master driver
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 06/13] board: gdsys: Fix dlvision-10g I2C configuration
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 07/13] board: gdsys: Increase iocon and dlv10g version string
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 08/13] board: gdsys: Configure bridge on DP501 to support DDC only
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 09/13] board: gdsys: Make gdsys osd hardware detection more robust
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 10/13] board: gdsys: Enable scrambling on DP501
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 11/13] board: iocon: Modify iocon hardware startup
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 12/13] board: gdsys: Remove commands to reduce footprint
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 13/13] fit: make sha256 support optional
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 1/2] ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 2/2] board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH] pcm051: use ti_am335x_common.h config
matwey.kornilov at gmail.com
- [U-Boot] [PATCH] powerpc/T4240QDS/eth: fix for XFI
shh.xie at gmail.com
- [U-Boot] [PATCH 1/2] powerpc/t2080qds: fixup dtb for 10g-kr
shh.xie at gmail.com
- [U-Boot] [PATCH 2/2] powerpc/t2080qds: fix dtb when runnig 1000BASE-KX protocol
shh.xie at gmail.com
- [U-Boot] Bug u-boot-tools: /usr/include/image.h gets included instead of <WC>/include/image.h
disposable at gmx.net
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
gabriel huau
- [U-Boot] [PATCH v5] mx6: add support of multi-processor command
gabriel huau
- [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support
sergey kostanbaev
- [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support
sergey kostanbaev
- [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation
Ajay kumar
- [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time
Ajay kumar
- [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode
Ajay kumar
- [U-Boot] [PATCH 4/6] exynos5: Enable data cashe
Ajay kumar
- [U-Boot] [PATCH 5/6] cros_ec: power: Add a tunnelled version of the tps65090 driver
Ajay kumar
- [U-Boot] [PATCH 6/6] cros_ec: exynos: Use the correct tps65090 driver in each case
Ajay kumar
- [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu
Ajay kumar
- [U-Boot] [PATCH V3 0/9] peach_pit: Add support for FIMD, DP and parade chip
Ajay kumar
- [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option
thomas.langer at lantiq.com
- [U-Boot] Giving control to standalone app.
mazen.e
- [U-Boot] Giving control to standalone app.
mazen.e
- [U-Boot] Giving control to standalone app.
mazen.e
- [U-Boot] [PATCH v3] Implement generalised RSA public exponents for verified boot
michael at smart-africa.com
- [U-Boot] Micrel KSZ9692 boot loader issue
sujithkuroor
- [U-Boot] u-boot command for standalone application
swami91
- [U-Boot] u-boot command for standalone application
swami91
- [U-Boot] u-boot command for standalone application
swami91
- [U-Boot] u-boot command for standalone application
swami91
- [U-Boot] [U-boot] question about nand_scan_bbt()
TigerLiu at via-alliance.com
- [U-Boot] [U-boot] Origen board boot failed with 2014.07 source code
TigerLiu at via-alliance.com
- [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin
TigerLiu at via-alliance.com
- [U-Boot] [PATCH]fix yaffs2 with inband-tags option, mtd_block_markbad & mtd_block_isbad parameter error.
xu.xing1 at zte.com.cn
Last message date:
Thu Jul 31 23:58:00 CEST 2014
Archived on: Thu Jul 31 23:58:13 CEST 2014
This archive was generated by
Pipermail 0.09 (Mailman edition).