[U-Boot] [U-boot] [Patch 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places

[Ivan Khoronzhuk]

Use CONFIG_SOC_KEYSTONE in common places instead of defining
a lot of "if def .. || if def " for different Keystone2 SoC types.

Acked-by: Murali Karicheri <m-karicheri2 at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
 common/image-fdt.c       | 2 +-
 drivers/serial/ns16550.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/common/image-fdt.c b/common/image-fdt.c
index 5d64009..f87cc5a 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -487,7 +487,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob,
 	if (!ft_verify_fdt(blob))
 		return -1;
 
-#ifdef CONFIG_SOC_K2HK
+#if defined(CONFIG_SOC_KEYSTONE)
 	if (IMAGE_OF_BOARD_SETUP)
 		ft_board_setup_ex(blob, gd->bd);
 #endif
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index f26979d..8e7052d 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -30,7 +30,7 @@
 #define serial_in(y)		readb(y)
 #endif
 
-#if defined(CONFIG_K2HK_EVM)
+#if defined(CONFIG_SOC_KEYSTONE)
 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE   0
 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
 #undef UART_MCRVAL
@@ -88,7 +88,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
 #endif /* CONFIG_OMAP */
-#if defined(CONFIG_K2HK_EVM)
+#if defined(CONFIG_SOC_KEYSTONE)
 	serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
 #endif
 }
-- 
1.8.3.2