July 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Jul 1 00:44:09 CEST 2014
Ending: Thu Jul 31 23:58:00 CEST 2014
Messages: 2233

• [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC   Jörg Krause
• [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC   Stephen Warren
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Wolfgang Denk
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Scott Wood
• [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC   Jörg Krause
• [U-Boot] [PATCH] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC   Marek Vasut
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: atmel: sama5d3xek: enable NOR flash support   Bo Shen
• [U-Boot] u-boot elf generation for arm64   S Durga Prasad Paladugu
• [U-Boot] [PATCH v1 17/25] i2c: mvtwsi: Add support for Marvell Armada XP   Heiko Schocher
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb   Shengzhou Liu
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb   Priyanka Jain
• [U-Boot] [PATCH RFC 1/3] spi:fsl_spi:Add compatibility for fsl-qspi and fsl-dspi modules driver   Chao Fu
• [U-Boot] [PATCH RFC 2/3] arm:vf610:Add SPI bus num in SOC level for SPI compatibility   Chao Fu
• [U-Boot] [PATCH RFC 3/3] arm:vf610-twr:Add fsl-spi-interface config and board info   Chao Fu
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Wolfgang Denk
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH] README: document CONFIG_ENV_IS_IN_SPI_FLASH   Josh Wu
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] SPL broken on i.mx31 platforms   Fabio Estevam
• [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Stephen Warren
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Stephen Warren
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Marek Vasut
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Stephen Warren
• [U-Boot] [PATCH 1/6] usb: ci_udc: fix ci_flush_{qh, qtd} calls in ci_udc_probe()   Stephen Warren
• [U-Boot] [PATCH 2/6] usb: ci_udc: don't assume QTDs are adjacent when transmitting ZLPs   Stephen Warren
• [U-Boot] [PATCH 3/6] usb: ci_udc: lift ilist size calculations to global scope   Stephen Warren
• [U-Boot] [PATCH 4/6] usb: ci_udc: fix items array size/stride calculation   Stephen Warren
• [U-Boot] [PATCH 5/6] usb: ci_udc: remove controller.items array   Stephen Warren
• [U-Boot] [PATCH 6/6] usb: ci_udc: don't memalign() struct ci_req allocations   Stephen Warren
• [U-Boot] [PATCH] mmc: sdhci: Fixed timeout for sdhci_send_command()   Andy Fleming
• [U-Boot] [PATCH] ARM: tegra: Add support for norrin board   Allen Martin
• [U-Boot] [PATCH 1/3] test: dfu: cleanup before execution   Stephen Warren
• [U-Boot] [PATCH 2/3] test: dfu: add some more test cases   Stephen Warren
• [U-Boot] [PATCH 3/3] dfu: fix readback buffer overflow test   Stephen Warren
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] SPL broken on i.mx31 platforms   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw   Bastien ROUCARIES
• [U-Boot] [PATCH] usb: ci_udc: use var name ep/ci_ep consistently   Stephen Warren
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Jörg Krause
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Stephen Warren
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Stephen Warren
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Jörg Krause
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Stephen Warren
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Jörg Krause
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Marek Vasut
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Stephen Warren
• [U-Boot] [PATCH 0/6] usb: ci_udc: fixes and cleanups   Stephen Warren
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Jörg Krause
• [U-Boot] [PATCH] USB: gadget: atmel: zero out allocated requests   Stephen Warren
• [U-Boot] [PATCH V2] usb: ci_udc: Allocate the qTD list directly   Stephen Warren
• [U-Boot] [PATCH v1 20/25] arm: kirkwood: Remove some dead code from cpu.c   Luka Perkov
• [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb   York Sun
• [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files   Luka Perkov
• [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id   Luka Perkov
• [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default   Luka Perkov
• [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH] USB: gadget: atmel: zero out allocated requests   Bo Shen
• [U-Boot] [PATCH v3] ARM: tegra: Disable VPR   Alexandre Courbot
• [U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2   Shaveta Leekha
• [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options   Shaveta Leekha
• [U-Boot] [PATCH] powerpc/chassis2: Configure and enable L2 cache for PPC clusters only   Shaveta Leekha
• [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset   Minkyu Kang
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] [PATCH v2 0/13] Fixes on gdsys boards and some new functionality   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 01/13] board: controlcenterd: Fix pci access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 03/13] board: controlcenterd: Use new API for setting i2c bus   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 04/13] board: iocon: Support DisplayPort hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 05/13] i2c: IHS I2C master driver   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 06/13] board: gdsys: Fix dlvision-10g I2C configuration   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 07/13] board: gdsys: Increase iocon and dlv10g version string   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 08/13] board: gdsys: Configure bridge on DP501 to support DDC only   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 09/13] board: gdsys: Make gdsys osd hardware detection more robust   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 10/13] board: gdsys: Enable scrambling on DP501   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 11/13] board: iocon: Modify iocon hardware startup   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 12/13] board: gdsys: Remove commands to reduce footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 13/13] fit: make sha256 support optional   dirk.eibach at gdsys.cc
• [U-Boot] SPL broken on i.mx31 platforms   Stefano Babic
• [U-Boot] [PATCH v3] Implement generalised RSA public exponents for verified boot   michael at smart-africa.com
• [U-Boot] [PATCH v2 05/13] i2c: IHS I2C master driver   Heiko Schocher
• [U-Boot] [PATCH v3 06/11] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] SPL broken on i.mx31 platforms   Albert ARIBAUD
• [U-Boot] [PATCH v4 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
• [U-Boot] [PATCH v4 01/12] samsung: misc: fix soc revision setting in the set_board_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v4 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Przemyslaw Marczak
• [U-Boot] [PATCH v4 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
• [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 05/12] samsung: misc: add function for setting $dfu_alt_info   Przemyslaw Marczak
• [U-Boot] [PATCH v4 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v4 07/12] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
• [U-Boot] [PATCH v4 09/12] samsung: misc: use board specific functions to set env board info   Przemyslaw Marczak
• [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH v4 11/12] odroid: add odroid U3/X2 device tree description   Przemyslaw Marczak
• [U-Boot] [PATCH v4 12/12] odroid: add odroid_config   Przemyslaw Marczak
• [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id   Stefan Roese
• [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files   Stefan Roese
• [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default   Stefan Roese
• [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Stefan Roese
• [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)   Christian Riesch
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] U-Boot: Enhancement request to get flash device specific information   HEERA NAND BHAGTANI
• [U-Boot] Fwd: Debian platform firmware strategy?   Chris Moore
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Fwd: Debian platform firmware strategy?   Stephen Warren
• [U-Boot] Requesting a custodian tree for sunxi (Allwinner) maintenance   Ian Campbell
• [U-Boot] [ANN] U-Boot v2014.07-rc4 released   Tom Rini
• [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads   Stephen Warren
• [U-Boot] [ANN] U-Boot v2014.07-rc4 released   Wolfgang Denk
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Fabio Estevam
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Stephen Warren
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [U-boot] [Patch 0/3] Add support for NAND U-boot image upgrade   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/3] keystone: add support for NAND gpheader image   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process   Ivan Khoronzhuk
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Wolfgang Denk
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Stephen Warren
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] [PATCH 0/4] Add support Alt board of Renesas R-Car   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/4] net: sh-eth: Add support R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/4] serial: sh: Add support R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] arm: rmobile: Add support Alt board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads   Heiko Schocher
• [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE   Masahiro Yamada
• [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE   Stefan Roese
• [U-Boot] [PATCH] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE   Zhang, Sonic
• [U-Boot] [PATCH v3 0/13] Fixes on gdsys boards and some new functionality   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 01/13] board: controlcenterd: Fix pci access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 03/13] board: controlcenterd: Use new API for setting i2c bus   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 04/13] board: iocon: Support DisplayPort hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 05/13] i2c: IHS I2C master driver   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 06/13] board: gdsys: Fix dlvision-10g I2C configuration   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 07/13] board: gdsys: Increase iocon and dlv10g version string   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 08/13] board: gdsys: Configure bridge on DP501 to support DDC only   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 09/13] board: gdsys: Make gdsys osd hardware detection more robust   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 10/13] board: gdsys: Enable scrambling on DP501   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 11/13] board: iocon: Modify iocon hardware startup   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 12/13] board: gdsys: Remove commands to reduce footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5] arm: Add support for semihosting for armv8 fastmodel targets.   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/13] Fixes on gdsys boards and some new functionality   Stefan Roese
• [U-Boot] [PATCH v3 05/13] i2c: IHS I2C master driver   Heiko Schocher
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   Heiko Schocher
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Stefano Babic
• [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
• [U-Boot] [PATCH v2 01/10] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
• [U-Boot] [PATCH v2 02/10] arm: ls102xa: Add i2c support for LS102xA   Alison Wang
• [U-Boot] [PATCH v2 03/10] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
• [U-Boot] [PATCH v2 04/10] arm: ls102xa: Add etsec support for LS102xA   Alison Wang
• [U-Boot] [PATCH v2 05/10] arm: ls102xa: Add esdhc support for LS102xA   Alison Wang
• [U-Boot] [PATCH v2 06/10] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
• [U-Boot] [PATCH v2 07/10] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
• [U-Boot] [PATCH v2 08/10] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
• [U-Boot] [PATCH v2 09/10] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH v2 10/10] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 01/13] board: controlcenterd: Fix pci access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 03/13] board: controlcenterd: Use new API for setting i2c bus   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 04/13] board: iocon: Support DisplayPort hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 05/13] i2c: IHS I2C master driver   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 06/13] board: gdsys: Fix dlvision-10g I2C configuration   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 07/13] board: gdsys: Increase iocon and dlv10g version string   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 08/13] board: gdsys: Configure bridge on DP501 to support DDC only   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 09/13] board: gdsys: Make gdsys osd hardware detection more robust   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 10/13] board: gdsys: Enable scrambling on DP501   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 11/13] board: iocon: Modify iocon hardware startup   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 12/13] board: gdsys: Remove commands to reduce footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v4 13/13] fit: make sha256 support optional   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Wolfgang Denk
• [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality   Dirk Eibach
• [U-Boot] : Enhancement request to get flash device specific information   HEERA NAND BHAGTANI
• [U-Boot] [PATCH v4 0/13] Fixes on gdsys boards and some new functionality   Dirk Eibach
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] Fwd: Re: [PATCH 2/3] env_mmc: support env partition setup in runtime   Igor Grinberg
• [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.   Xiubo Li
• [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.   Xiubo Li
• [U-Boot] [PATCH 2/4] ARM: add the pen address byte reverting support.   Xiubo Li
• [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7   Xiubo Li
• [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region   Xiubo Li
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Tom Rini
• [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.   Diana Craciun
• [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.   Diana Craciun
• [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7   Diana Craciun
• [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region   Diana Craciun
• [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Albert ARIBAUD
• [U-Boot] SPL broken on i.mx31 platforms   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   AlisonWang
• [U-Boot] Requesting a custodian tree for sunxi (Allwinner) maintenance   Detlev Zundel
• [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process   Murali Karicheri
• [U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process   Ivan Khoronzhuk
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   Simon Glass
• [U-Boot] [U-boot] Does u-boot.bin only include a data section?   Simon Glass
• [U-Boot] U-Boot: Enhancement request to get flash device specific information   Simon Glass
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Fabio Estevam
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   Tom Rini
• [U-Boot] [PATCH v1 01/25] sf: Add M25PX64 SPI NOR flash ID   Jagan Teki
• [U-Boot] [PATCH v1 02/25] arm: kirkwood: spi.h: Add some missing parenthesis   Jagan Teki
• [U-Boot] [PATCH v1 03/25] spi: kirkwood_spi.c: Some fixes and cleanup   Jagan Teki
• [U-Boot] [PATCH v1 04/25] spi: kirkwood_spi.c: Make global variable static   Jagan Teki
• [U-Boot] [PATCH v1 05/25] spi: kirkwood_spi.c: cosmetic: Fix minor coding style issues   Jagan Teki
• [U-Boot] [PATCH] README: document CONFIG_ENV_IS_IN_SPI_FLASH   Jagan Teki
• [U-Boot] [PATCH] sf: Stop leaking memory   Jagan Teki
• [U-Boot] [PATCH] git-mailrc: Add sunxi custodians.   Ian Campbell
• [U-Boot] [PATCH] git-mailrc: Add sunxi custodians.   Hans de Goede
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] [PATCH] sf: Stop leaking memory   Marek Vasut
• [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Luka Perkov
• [U-Boot] [PATCH v1 23/25] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported   Luka Perkov
• [U-Boot] [PATCH v1 24/25] tools: kwbimage: Add image version 1 support for Armada XP / 370   Luka Perkov
• [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.   Li.Xiubo at freescale.com
• [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.   Li.Xiubo at freescale.com
• [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7   Li.Xiubo at freescale.com
• [U-Boot] [PATCH 4/4] ARM: LS1021A: to allow non-secure R/W access for all devices' mapped region   Li.Xiubo at freescale.com
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   Heiko Schocher
• [U-Boot] [PATCH v3 13/13] fit: make sha256 support optional   Dirk Eibach
• [U-Boot] [PATCH v4 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Jaehoon Chung
• [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.   Jaehoon Chung
• [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types   Jaehoon Chung
• [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Jaehoon Chung
• [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
• [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] SPL broken on i.mx31 platforms   Albert ARIBAUD
• [U-Boot] ARMv8 spin-table patches   Mark Rutland
• [U-Boot] [PATCH] mpc85xx/t104x: Enable L2 and CPC cache when resume   Tang Yuantian
• [U-Boot] [PATCH 1/4] ARM: fix the ARCH Timer frequency setting.   Diana Craciun
• [U-Boot] [PATCH 0/6] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH 3/6] arm: uniphier: add UniPhier SoC suppurt code   Masahiro Yamada
• [U-Boot] [PATCH 4/6] arm: uniphier: add UniPhier config headers   Masahiro Yamada
• [U-Boot] [PATCH 5/6] arm: uniphier: add board entries to boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH 6/6] git-mailrc: add me as the maintainer of UniPhier SoCs   Masahiro Yamada
• [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
• [U-Boot] [PATCH v4 04/12] board:samsung: check the boot device and init the right mmc driver.   Jaehoon Chung
• [U-Boot] [PATCH v4 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Jaehoon Chung
• [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7   Diana Craciun
• [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.   Diana Craciun
• [U-Boot] [U-boot] [Patch v2 0/3] Add support for NAND U-boot image upgrade   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 2/3] keystone: add support for NAND gpheader image   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 3/3] k2hk_evm: add script to automate NAND flash process   Ivan Khoronzhuk
• [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood: cosmetic: style fixes in kwbimage.cfg files   Prafulla Wadaskar
• [U-Boot] [PATCH V3 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay Kumar
• [U-Boot] [PATCH V3 1/9] exynos_fb: Remove usage of static defines   Ajay Kumar
• [U-Boot] [PATCH V3 2/9] arm: exynos: Add RPLL for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH V3 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay Kumar
• [U-Boot] [PATCH V3 5/9] video: Add driver for Parade PS8625 dP to LVDS bridge   Ajay Kumar
• [U-Boot] [PATCH V3 6/9] ARM: exynos: Add missing declaration for gpio_direction_input   Ajay Kumar
• [U-Boot] [PATCH V3 7/9] exynos5420: add callbacks needed for exynos_fb driver   Ajay Kumar
• [U-Boot] [PATCH V3 8/9] ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge chip   Ajay Kumar
• [U-Boot] [PATCH V3 9/9] CONFIGS: peach-pit: Enable display for peach_pit board   Ajay Kumar
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Marek Vasut
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Marek Vasut
• [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms   Marek Vasut
• [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too   Marek Vasut
• [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too   Ian Campbell
• [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms   Ian Campbell
• [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms   Marek Vasut
• [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too   Marek Vasut
• [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms   Ian Campbell
• [U-Boot] [PATCH v4: DNS320 support 0/4] Add a new kirkwook board   Bastien ROUCARIÈS
• [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw   Bastien ROUCARIÈS
• [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320   Bastien ROUCARIÈS
• [U-Boot] [PATCH 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325   Bastien ROUCARIÈS
• [U-Boot] [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Bastien ROUCARIÈS
• [U-Boot] [Patch v9 1/5] Added 64-bit MMIO accessors for ARMv8   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: cache_v7: use __weak   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: cache_v7: use __weak   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320   Albert ARIBAUD
• [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support   Pekon Gupta
• [U-Boot] [PATCH v1 1/7] TI: armv7: move board specific NAND configs out from ti_armv7_common.h and ti_am335x_common.h   Pekon Gupta
• [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape   Pekon Gupta
• [U-Boot] [PATCH v1 3/7] arm: lib: continue board_init_r even if valid flash device is not detected   Pekon Gupta
• [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape   Pekon Gupta
• [U-Boot] [PATCH v1 5/7] board/ti/am335x: update configs for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH v1 6/7] board/ti/am43xx: add support for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH] ARM: kirkwood: fix cpu info for 6282 device id   Albert ARIBAUD
• [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings   Albert ARIBAUD
• [U-Boot] [PATCH V5: 0/5] Add a new kirkwook board   Bastien ROUCARIÈS
• [U-Boot] [PATCH V5: 1/5] kirkwood: Rename dns325 to dnskw   Bastien ROUCARIÈS
• [U-Boot] [PATCH V5: 2/5] kirkwood: Add support for the D-Link DNS-320   Bastien ROUCARIÈS
• [U-Boot] [PATCH V5: 3/5] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325   Bastien ROUCARIÈS
• [U-Boot] [PATCH V5: 4/5] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Bastien ROUCARIÈS
• [U-Boot] [PATCH V5: 5/5] Add documentation for dns-32{0,5}   Bastien ROUCARIÈS
• [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)   Albert ARIBAUD
• [U-Boot] [PATCH] mmc: sdhci: Fixed timeout for sdhci_send_command()   Steve Rae
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: Fix armv8 compilation error   Albert ARIBAUD
• [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
• [U-Boot] [PATCH v2] gpio: spear_gpio: Fix gpio_set_value() implementation   Albert ARIBAUD
• [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Albert ARIBAUD
• [U-Boot] [PATCH v5 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Albert ARIBAUD
• [U-Boot] [PATCH v5 2/2] socfpga: Adding DesignWare watchdog support   Albert ARIBAUD
• [U-Boot] [PATCH v8] socfpga: Adding Scan Manager driver   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Fix armv8 compilation error   Steve Rae
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v2] socfpga: Relocate arch common functions away from board   Albert ARIBAUD
• [U-Boot] [PATCH] arm:board:h2200: Add CONFIG_SYS_GENERIC_BOARD   Albert ARIBAUD
• [U-Boot] [PATCH] arm, calimain: Add CONFIG_SYS_GENERIC_BOARD   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: rpi_b: enable GENERIC_BOARD   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: switch to generic board   Albert ARIBAUD
• [U-Boot] [PATCH v2] socfpga: Relocate arch common functions away from board   Albert ARIBAUD
• [U-Boot] [PATCH] arm: spl: fix include guard   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Fix armv8 compilation error   Albert ARIBAUD
• [U-Boot] [PATCH] ARM:asm:io.h use static inline   Albert ARIBAUD
• [U-Boot] [patch 0/2] SPL: Lightweight UBI and UBI fastmap support   Thomas Gleixner
• [U-Boot] [patch 1/2] nand_spl_simple: Add a simple flash read function   Thomas Gleixner
• [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support   Thomas Gleixner
• [U-Boot] [PATCH] ARM:asm:io.h use static inline   Jeroen Hofstee
• [U-Boot] Pull request: u-boot-arm/master - please hold on   Albert ARIBAUD
• [U-Boot] [PATCH] ARM:asm:io.h use static inline   Albert ARIBAUD
• [U-Boot] [PATCH] ARM:asm:io.h use static inline   Jeroen Hofstee
• [U-Boot] [RFC 06/10] cc-option: make it work with clang   Jeroen Hofstee
• [U-Boot] [PATCH] pcm051: use ti_am335x_common.h config   matwey.kornilov at gmail.com
• [U-Boot] [PATCH] ARM:asm:io.h use static inline   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master - can be applied   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support   Igor Grinberg
• [U-Boot] Giving control to standalone app.   mazen.e
• [U-Boot] Giving control to standalone app.   Jeroen Hofstee
• [U-Boot] Giving control to standalone app.   mazen.e
• [U-Boot] Giving control to standalone app.   Albert ARIBAUD
• [U-Boot] Giving control to standalone app.   mazen.e
• [U-Boot] [PATCH v2 1/5] mvtwsi: convert to CONFIG_SYS_I2C framework   Ian Campbell
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Wolfgang Denk
• [PATCH] sunxi: Avoid unused variable warning.   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH] kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabled   Alexey Ignatov
• [U-Boot] [PATCH] buildman: fix to display warning message for missing [toolchain] section   Masahiro Yamada
• [U-Boot] [PATCH] buildman: fix toolchain priority_list   Masahiro Yamada
• [U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7   Li.Xiubo at freescale.com
• [U-Boot] [PATCH] powerpc/t1040: fix i2c2 address on t1040qds and t104xrdb   Shengzhou.Liu at freescale.com
• [U-Boot] [PATCH 0/4] Add LS1021A-QDS/TWR Non-secure and HYP support.   Li.Xiubo at freescale.com
• [U-Boot] [PATCH] powerpc/t1040: update i2c for t1040qds and t104xrdb   Shengzhou Liu
• [U-Boot] [PATCH] fsl_i2c: add support for 3rd and 4th I2C   Shengzhou Liu
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Wolfgang Denk
• [U-Boot] [PATCH] arch/arm: Add individual TLB size support.   Xiubo Li
• [U-Boot] [PATCH]fix yaffs2 with inband-tags option, mtd_block_markbad & mtd_block_isbad parameter error.   xu.xing1 at zte.com.cn
• [U-Boot] [Question] Is it safe to use 'set verify n' ?   Frank Ihle
• [U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support   Gupta, Pekon
• [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)   Christian Riesch
• [U-Boot] enbw_cmc, da850evm_direct_nor, and calimain vectors table misaligned (was: [PATCH] arm: fix a build error with CONFIG_USE_IRQ)   Christian Riesch
• [U-Boot] [PATCH] arm: include config.h in arch/arm/lib/vectors.S   Christian Riesch
• [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Maxin B. John
• [U-Boot] [Question] Any plan to refactor Generic Board Framework?   Masahiro Yamada
• [U-Boot] [Question] Any plan to refactor Generic Board Framework?   Simon Glass
• [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: doc: update README.generic-board   Masahiro Yamada
• [U-Boot] [PATCH]fix yaffs2 with inband-tags option, mtd_block_markbad & mtd_block_isbad parameter error.   Wolfgang Denk
• [U-Boot] [Question] Is it safe to use 'set verify n' ?   Wolfgang Denk
• [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Wolfgang Denk
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Tom Rini
• [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Maxin B. John
• [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Heiko Schocher
• [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Wolfgang Denk
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Fabio Estevam
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [U-boot] [Patch v2 3/3] k2hk_evm: add script to automate NAND flash process   Murali Karicheri
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Tom Rini
• [U-Boot] [PATCH 1/2] usb: host: xhci: make sure to power up PHY   Felipe Balbi
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Felipe Balbi
• [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation   Simon Glass
• [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time   Simon Glass
• [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode   Simon Glass
• [U-Boot] [PATCH 4/6] exynos5: Enable data cashe   Simon Glass
• [U-Boot] [PATCH 5/6] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
• [U-Boot] [PATCH 6/6] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Tom Rini
• [U-Boot] [PATCH v2] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Maxin B. John
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Wolfgang Denk
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Marek Vasut
• [U-Boot] [PATCH v4 0/3] mtd, ubi, ubifs: resync with Linux-3.14   Scott Wood
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Tom Rini
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] SPL with NAND: programming addresses   Scott Wood
• [U-Boot] [PATCH] buildman: fix toolchain priority_list   Simon Glass
• [U-Boot] [PATCH] buildman: fix to display warning message for missing [toolchain] section   Simon Glass
• [U-Boot] [PATCH] cosmetic: doc: update README.generic-board   Simon Glass
• [U-Boot] [PATCH RFC 1/3] spi:fsl_spi:Add compatibility for fsl-qspi and fsl-dspi modules driver   Simon Glass
• [U-Boot] [PATCH] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists   Simon Glass
• [U-Boot] [PATCH RFC 0/2] usb: host: Add a wrapper layer for mutiple host support   Simon Glass
• [U-Boot] m68k: Fix warnings with gcc 4.6   Simon Glass
• [U-Boot] [PATCH v2 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] [PATCH v2 1/9] Remove form-feeds from dlmalloc.c   Simon Glass
• [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v2 3/9] sandbox: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v2 4/9] Add a simple malloc() implementation for pre-relocation   Simon Glass
• [U-Boot] [PATCH v2 5/9] arm: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v2 6/9] exynos: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v2 7/9] sandbox: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v2 8/9] sandbox: config: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v2 9/9] sandbox: Always enable malloc debug   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch tom   Simon Glass
• [U-Boot] Avoid using gawk-specific strtonum()   Tom Rini
• [U-Boot] ARM: emif4: wait for CM_DLL_READYST to be set   Tom Rini
• [U-Boot] vcma9/lowlevel_init.S: trivial: terminate comment   Tom Rini
• [U-Boot] tpm: don't use unneeded double brackets   Tom Rini
• [U-Boot] [U-Boot, 1/7] mpc8xx: remove qs850, qs860t board support   Tom Rini
• [U-Boot] [U-Boot, 2/7] mpc8xx: remove RPXlite_dw, quantum board support   Tom Rini
• [U-Boot] [U-Boot, 4/7] mpc8xx: remove netta, netta2, netphone board support   Tom Rini
• [U-Boot] [U-Boot,5/7] mpc8xx: remove fads board support   Tom Rini
• [U-Boot] [U-Boot,6/7] mpc8xx: remove v37 board support   Tom Rini
• [U-Boot] [U-Boot,7/7] mpc8xx: remove spc1920 board support   Tom Rini
• [U-Boot] TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagle   Tom Rini
• [U-Boot] Makefile: drop arch/*/include/asm/proc from make mrproper pattern   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] env_fat: use get_device_and_partition() during env save and load   Tom Rini
• [U-Boot] [U-Boot, v3, 2/2] README: document the CONFIG_ENV_IS_IN_FAT option   Tom Rini
• [U-Boot] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists   Tom Rini
• [U-Boot] board: ti: dra7xx: add mux data for UART3   Tom Rini
• [U-Boot] doc/README.falcon: Clarify steps slightly.   Tom Rini
• [U-Boot] [U-Boot, 1/2] am43xx: Update EMIF DDR3 Configuration for AM43x GP   Tom Rini
• [U-Boot] [U-Boot, 2/2] am43xx: Tune the system to avoid DSS underflows   Tom Rini
• [U-Boot] m68k: Fix bug, "address of" operator was forgotten   Tom Rini
• [U-Boot] m68k: Fix incorrect memory access on M5235   Tom Rini
• [U-Boot] blackfin: Fix warning about undefined function   Tom Rini
• [U-Boot] blackfin: Add more dcache functions   Tom Rini
• [U-Boot] README: document CONFIG_ENV_IS_IN_SPI_FLASH   Tom Rini
• [U-Boot] blackfin, powerpc: remove redundant definitions of ARRAY_SIZE   Tom Rini
• [U-Boot] [U-Boot, v4, 01/13] board: controlcenterd: Fix pci access   Tom Rini
• [U-Boot] [U-Boot, v4, 02/13] board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change   Tom Rini
• [U-Boot] [U-Boot, v4, 03/13] board: controlcenterd: Use new API for setting i2c bus   Tom Rini
• [U-Boot] [U-Boot, v4, 04/13] board: iocon: Support DisplayPort hardware   Tom Rini
• [U-Boot] [U-Boot,v4,05/13] i2c: IHS I2C master driver   Tom Rini
• [U-Boot] [U-Boot, v4, 06/13] board: gdsys: Fix dlvision-10g I2C configuration   Tom Rini
• [U-Boot] [U-Boot, v4, 07/13] board: gdsys: Increase iocon and dlv10g version string   Tom Rini
• [U-Boot] [U-Boot, v4, 08/13] board: gdsys: Configure bridge on DP501 to support DDC only   Tom Rini
• [U-Boot] [U-Boot, v4, 09/13] board: gdsys: Make gdsys osd hardware detection more robust   Tom Rini
• [U-Boot] [U-Boot, v4, 10/13] board: gdsys: Enable scrambling on DP501   Tom Rini
• [U-Boot] [U-Boot, v4, 11/13] board: iocon: Modify iocon hardware startup   Tom Rini
• [U-Boot] [U-Boot, v4, 12/13] board: gdsys: Remove commands to reduce footprint   Tom Rini
• [U-Boot] [U-Boot,v4,13/13] fit: make sha256 support optional   Tom Rini
• [U-Boot] git-mailrc: Add sunxi custodians.   Tom Rini
• [U-Boot] kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabled   Tom Rini
• [U-Boot] cosmetic: doc: update README.generic-board   Tom Rini
• [U-Boot] Please pull u-boot-x86.git branch tom   Tom Rini
• [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings   Tom Rini
• [U-Boot] [PATCH] doc/README.falcon: Clarify steps slightly.   Tom Rini
• [U-Boot] cosmetic: doc: update README.generic-board   Tom Rini
• [U-Boot] [PATCH 3/7] mpc8xx: remove rbc823 board support   Tom Rini
• [U-Boot] ARMv8 spin-table patches   Scott Wood
• [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation   Ajay kumar
• [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time   Ajay kumar
• [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode   Ajay kumar
• [U-Boot] [PATCH 4/6] exynos5: Enable data cashe   Ajay kumar
• [U-Boot] [PATCH 5/6] cros_ec: power: Add a tunnelled version of the tps65090 driver   Ajay kumar
• [U-Boot] [PATCH 6/6] cros_ec: exynos: Use the correct tps65090 driver in each case   Ajay kumar
• [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Gupta, Pekon
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [PATCH 1/3] test: dfu: cleanup before execution   Lukasz Majewski
• [U-Boot] [PATCH 2/3] test: dfu: add some more test cases   Lukasz Majewski
• [U-Boot] [PATCH 3/3] dfu: fix readback buffer overflow test   Lukasz Majewski
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Stefano Babic
• [U-Boot] [PATCH v5 4/4] mx6sx: Add initial support for mx6sxsabresd board   Stefano Babic
• [U-Boot] [PATCH v5 3/4] mx6: clock: Do not enable sata and ipu clocks   Stefano Babic
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Stefano Babic
• [U-Boot] [PATCH v5 2/4] mx6sx: Add pin definitions   Stefano Babic
• [U-Boot] [PATCH v4] mx6: add support of multi-processor command   Stefano Babic
• [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Pavel Machek
• [U-Boot] [PATCH v2] mx6: add support of multi-processor command   Pavel Machek
• [U-Boot] CONFIG_SYS_GENERIC_BOARD status   Simon Glass
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Tom Rini
• [U-Boot] [PATCH v5 1/4] mx6: Add support for the mx6solox variant   Fabio Estevam
• [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()   Jeroen Hofstee
• [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   York Sun
• [U-Boot] uboot-env.bin   Naitik Amin
• [U-Boot] [PATCH] common: board_f: cosmetic use __weak for leds   Simon Glass
• [U-Boot] [PATCH] common: main.c: make show_boot_progress __weak   Simon Glass
• [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] Please pull u-boot-sunxi.git/next   Ian Campbell
• [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()   Jeroen Hofstee
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Roman Byshko
• [U-Boot] [PATCH 1/5] sunxi: add defines to control USB Host clocks/resets   Roman Byshko
• [U-Boot] [PATCH 2/5] sunxi: add USB EHCI driver   Roman Byshko
• [U-Boot] [PATCH 3/5] sunxi: add USB options to configs   Roman Byshko
• [U-Boot] [PATCH 4/5] sun7i: add USB EHCI configuration   Roman Byshko
• [U-Boot] [PATCH 5/5] sun7i: cubietruck: enable USB EHCI   Roman Byshko
• [U-Boot] Please pull u-boot-sunxi.git/next   Jeroen Hofstee
• [U-Boot] [PATCH 1/2] spi: ST33ZP24 SPI TPM driver   Jean-Luc BLANC
• [U-Boot] Programming PHY firmware over MDIO   Danny Gale
• [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings   Ash Charles
• [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Ash Charles
• [U-Boot] [PATCH] build: define CPU only when arch/${ARCH}/cpu/${CPU} exists   Masahiro Yamada
• [U-Boot] [PATCH v2 0/29] Add additional core driver model features   Simon Glass
• [U-Boot] [PATCH v2 01/29] dm: gpio: Don't use the driver model uclass for SPL   Simon Glass
• [U-Boot] [PATCH v2 02/29] dm: Use an explicit expect value in core tests   Simon Glass
• [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls   Simon Glass
• [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods   Simon Glass
• [U-Boot] [PATCH v2 05/29] dm: Make sure that the root device is probed   Simon Glass
• [U-Boot] [PATCH v2 06/29] dm: Provide a way to shut down driver model   Simon Glass
• [U-Boot] [PATCH v2 07/29] sandbox: Remove all drivers before exit   Simon Glass
• [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'   Simon Glass
• [U-Boot] [PATCH v2 09/29] dm: Support driver model prior to relocation   Simon Glass
• [U-Boot] [PATCH v2 10/29] stdio: Provide functions to add/remove devices using stdio_dev   Simon Glass
• [U-Boot] [PATCH v2 11/29] console: Remove vprintf() optimisation for sandbox   Simon Glass
• [U-Boot] [PATCH v2 12/29] Add a flag indicating when the serial console is ready   Simon Glass
• [U-Boot] [PATCH v2 13/29] dm: Move uclass error checking/probing into a function   Simon Glass
• [U-Boot] [PATCH v2 14/29] fdt: Add a function to get the alias sequence of a node   Simon Glass
• [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function   Simon Glass
• [U-Boot] [PATCH v2 16/29] dm: Avoid activating devices in 'dm uclass' command   Simon Glass
• [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering   Simon Glass
• [U-Boot] [PATCH v2 18/29] dm: Display the sequence number for each device   Simon Glass
• [U-Boot] [PATCH v2 19/29] dm: Allow a device to be found by its FDT offset   Simon Glass
• [U-Boot] [PATCH v2 20/29] dm: Avoid accessing uclasses before they are ready   Simon Glass
• [U-Boot] [PATCH v2 21/29] fdt: Add a function to get the node offset of an alias   Simon Glass
• [U-Boot] [PATCH v2 22/29] dm: Tidy up some header file comments   Simon Glass
• [U-Boot] [PATCH v2 23/29] dm: Provide a function to scan child FDT nodes   Simon Glass
• [U-Boot] [PATCH v2 24/29] dm: Add functions to access a device's children   Simon Glass
• [U-Boot] [PATCH v2 25/29] dm: Introduce per-child data for devices   Simon Glass
• [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Simon Glass
• [U-Boot] [PATCH v2 27/29] dm: Improve errors and warnings in lists_bind_fdt()   Simon Glass
• [U-Boot] [PATCH v2 28/29] dm: Add dm_scan_other() to locate board-specific devices   Simon Glass
• [U-Boot] [PATCH v2 29/29] dm: Give the demo uclass a name   Simon Glass
• [U-Boot] Please pull u-boot-sunxi.git/next   Ian Campbell
• [U-Boot] [PATCH 2/2] i2c: ST33ZP24 I2C TPM driver   Jean-Luc BLANC
• [U-Boot] [Question] Any plan to refactor Generic Board Framework?   Masahiro Yamada
• [U-Boot] CONFIG_SYS_GENERIC_BOARD status   Masahiro Yamada
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Ian Campbell
• [U-Boot] SPL broken on i.mx31 platforms, FIX?   Helmut Raiger
• [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field   Masahiro Yamada
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [U-boot] question about nand_scan_bbt()   TigerLiu at via-alliance.com
• [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer   Sricharan R
• [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer   Lokesh Vutla
• [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Tom Rini
• [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options   Tom Rini
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Michael Trimarchi
• [U-Boot] [PATCH 1/6] ARM: m28evk: add needed commands and options   Stefano Babic
• [U-Boot] [PATCH] MX6: Correct calculation of PLL_SYS   Stefano Babic
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Henrik Nordström
• [U-Boot] [PATCH] mx6: soc: Update the comments of set_ldo_voltage()   Stefano Babic
• [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field   Tom Rini
• [U-Boot] [PULL]: small fixes from u-boot-imx   Stefano Babic
• [U-Boot] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer   Tom Rini
• [U-Boot] [PULL]: small fixes from u-boot-imx   Tom Rini
• [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering   Jon Loeliger
• [U-Boot] [PATCH v3 00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements   Hans de Goede
• [U-Boot] [PATCH] doc: Add zynq fragment to git-mailrc file   Michal Simek
• [U-Boot] [PATCH] doc: Add zynq fragment to git-mailrc file   Tom Rini
• [U-Boot] [PATCH 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [PATCH] tricorder: convert to generic board   Andreas Bießmann
• [U-Boot] [PATCH] ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainer   Nishanth Menon
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Stefan Roese
• [U-Boot] [PATCH 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c   Stefan Roese
• [U-Boot] [PATCH 3/3] ARM: omap: tao3530: Convert to generic board   Stefan Roese
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Marek Vasut
• [U-Boot] [[U-boot] [Patch 0/6] Optimize Keystone2 code for other SoC types   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 1/6] ARM: keystone2: psc: use common PSC base   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 5/6] keystone2: move cpu_to_bus() to keystone.c   Ivan Khoronzhuk
• [U-Boot] [[U-boot] [Patch 6/6] keystone2: add possibility to turn off all dsps   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 0/6] Optimize Keystone2 code for other SoC types   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/6] ARM: keystone2: psc: use common PSC base   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 5/6] keystone2: move cpu_to_bus() to keystone.c   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 6/6] keystone2: add possibility to turn off all dsps   Ivan Khoronzhuk
• [U-Boot] [PATCH 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c   Gupta, Pekon
• [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Gupta, Pekon
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Gupta, Pekon
• [U-Boot] [PATCH 1/2] mx6: soc: Do not apply the PFD erratum for mx6solox   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add PFUZE100 PMIC support   Fabio Estevam
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Eric Nelson
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Otavio Salvador
• [U-Boot] [PULL] u-boot/master   Marek Vasut
• [U-Boot] [PATCH] Fix help text of ext2load and fatload.   Pavel Machek
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Pavel Machek
• [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file   Ivan Khoronzhuk
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Pavel Machek
• [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Marek Vasut
• [U-Boot] [PATCH] Fix help text of ext2load and fatload.   Marek Vasut
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Marek Vasut
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Pavel Machek
• [U-Boot] [PATCH] Fix help text of ext2load and fatload.   Pavel Machek
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Wolfgang Denk
• [U-Boot] [PATCH] catch wrong load address passed to fatload / ext2load   Pavel Machek
• [U-Boot] socfpga: time problems, get ethernet to work in recent versions   Pavel Machek
• [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field   Masahiro Yamada
• [U-Boot] [PATCH 1/2] usb: host: xhci: make sure to power up PHY   Felipe Balbi
• [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Felipe Balbi
• [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Felipe Balbi
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Stefan Roese
• [U-Boot] U-Boot: Enhancement request to get flash device specific information   HEERA NAND BHAGTANI
• [U-Boot] mini2440 u boot executing from NAND   dashy1981
• [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support   Markus Niebel
• [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support   Stefano Babic
• [U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x   Marek Vasut
• [U-Boot] CONFIG_SYS_GENERIC_BOARD status   Masahiro Yamada
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH] powerpc/t104xrdb: Add T1042RDB board support   Vijay Rai
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Marek Vasut
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Marek Vasut
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Marek Vasut
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   arnab.basu at freescale.com
• [U-Boot] [PATCH] spl: nand: read only in the size of image_header on the first access   Masahiro Yamada
• [U-Boot] U-Boot: Enhancement request to get flash device specific information   Wolfgang Denk
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Marek Vasut
• [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support   Stefano Babic
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Eric Nelson
• [U-Boot] Newbie question: What are uImage and initrd?   David Aldrich
• [U-Boot] [Patch v3] Add TQ Systems TQMa6 board support   Markus Niebel
• [U-Boot] [PATCH] lib:sha1: remove unused constant   Jeroen Hofstee
• [U-Boot] [PATCH] env_callback.h: spl: mark callback as maybe_unused   Jeroen Hofstee
• [U-Boot] [PATCH] lcd: remove unused lcd_puts_xy   Jeroen Hofstee
• [U-Boot] [PATCH] lib:vsprintf: reduce scope of pack_hex_byte   Jeroen Hofstee
• [U-Boot] [PATCH] dirvers: mmc: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH] common: bootm_os: make arch_preboot_os __weak   Jeroen Hofstee
• [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak   Jeroen Hofstee
• [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak   Jeroen Hofstee
• [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls   Marek Vasut
• [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods   Marek Vasut
• [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'   Marek Vasut
• [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function   Marek Vasut
• [U-Boot] [PATCH 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu   Simon Glass
• [U-Boot] [PATCH V3 6/9] ARM: exynos: Add missing declaration for gpio_direction_input   Simon Glass
• [U-Boot] [PATCH V3 9/9] CONFIGS: peach-pit: Enable display for peach_pit board   Simon Glass
• [U-Boot] [PATCH v2 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] [PATCH v3 1/9] Remove form-feeds from dlmalloc.c   Simon Glass
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v3 3/9] sandbox: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v3 4/9] Add a simple malloc() implementation for pre-relocation   Simon Glass
• [U-Boot] [PATCH v3 5/9] arm: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 6/9] exynos: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 7/9] sandbox: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 8/9] sandbox: config: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 9/9] sandbox: Always enable malloc debug   Simon Glass
• [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak   Wolfgang Denk
• [U-Boot] [PATCH v2 15/29] dm: Move device display into its own function   Simon Glass
• [U-Boot] [PATCH v2 04/29] stdio: Pass device pointer to stdio methods   Simon Glass
• [U-Boot] [PATCH v1 0/2] Add SD boot support for LS1021AQDS/TWR board   Alison Wang
• [U-Boot] [PATCH 1/2] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH 2/2] arm: ls102xa: Add SD boot support for LS1021ATWR board   Alison Wang
• [U-Boot] [RFC PATCH v4 0/11] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [RFC PATCH v4 01/11] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [RFC PATCH v4 02/11] exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [RFC PATCH v4 03/11] exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [RFC PATCH v4 04/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [RFC PATCH v4 05/11] exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [RFC PATCH v4 06/11] exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [RFC PATCH v4 07/11] exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [RFC PATCH v4 08/11] exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [RFC PATCH v4 09/11] dm: gpio: Enhance gpio command to show only active GPIOs   Simon Glass
• [U-Boot] [RFC PATCH v4 10/11] exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [RFC PATCH v4 11/11] dm: sandbox: dts: Add a GPIO bank   Simon Glass
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH V3 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay kumar
• [U-Boot] socfpga: time problems, get ethernet to work in recent versions   Pavel Machek
• [U-Boot] [PATCH v2 1/2] boards.cfg: keep it sorted filling the board field   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] boards.cfg: change "<none>" in the board field to "-"   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox   Stefano Babic
• [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
• [U-Boot] [PATCH 2/6] serial: add UniPhier serial driver   Marek Vasut
• [U-Boot] [PATCH] boards.cfg: keep it sorted filling the board field   Masahiro Yamada
• [U-Boot] Antw: [PATCH v11 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme   Steffen Arendt
• [U-Boot] socfpga: time problems, get ethernet to work in recent versions   Pavel Machek
• [U-Boot] [PATCH] bootp can use mdelay   Pavel Machek
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH] bootp can use mdelay   Marek Vasut
• [U-Boot] [PATCH] socfpga: initialize designware ethernet   Pavel Machek
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Marek Vasut
• [U-Boot] [PATCH] socfpga: initialize designware ethernet   Marek Vasut
• [U-Boot] Antw: [PATCH v11 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme   Andreas Bießmann
• [U-Boot] [PATCH] socfpga: initialize designware ethernet   Pavel Machek
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH] socfpga: initialize designware ethernet   Marek Vasut
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Marek Vasut
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH v1 1/4] arm, imx6: add mxc_iomux_set_gpr_register function   Stefano Babic
• [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()   Stefano Babic
• [U-Boot] [PATCH 0/3] Collection of ns16550 UART driver refactoring   Masahiro Yamada
• [U-Boot] [PATCH 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case   Masahiro Yamada
• [U-Boot] [PATCH 2/3] serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisor   Masahiro Yamada
• [U-Boot] [PATCH 3/3] serial: ns16550: use a const variable instead of macro   Masahiro Yamada
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Marek Vasut
• [U-Boot] [PATCH 3/3] serial: ns16550: use a const variable instead of macro   Marek Vasut
• [U-Boot] [PATCH 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case   Masahiro Yamada
• [U-Boot] [PATCH v8] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v1 4/4] arm, imx6: add aristainetos board   Stefano Babic
• [U-Boot] [PATCH v1 1/4] arm, imx6: add mxc_iomux_set_gpr_register function   Heiko Schocher
• [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()   Fabio Estevam
• [U-Boot] [PATCH V3 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay kumar
• [U-Boot] [PATCH v1 4/4] arm, imx6: add aristainetos board   Heiko Schocher
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Wolfgang Denk
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak   Jeroen Hofstee
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Jeroen Hofstee
• [U-Boot] [RFC 01/10] ARM: crt0.S: clear the global data   Jeroen Hofstee
• [U-Boot] [PULL] u-boot/master   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Wolfgang Denk
• [U-Boot] [PATCH] common: env_common: make env_get_char_spec __weak   Wolfgang Denk
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH 1/3] sf: ops: Add spi_flash_copy_mmap function   Tom Rini
• [U-Boot] [PATCH 2/3] dma: Add TI EDMA driver   Tom Rini
• [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL   Tom Rini
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Tom Rini
• [U-Boot] [PATCH v2 0/5] arm, imx6: add aristainetos board support   Heiko Schocher
• [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
• [U-Boot] [PATCH v2 2/5] imx6: add gpr2 usb_otg_id iomux select control define   Heiko Schocher
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Heiko Schocher
• [U-Boot] [PATCH v2 4/5] i.MX6: add enable_spi_clk()   Heiko Schocher
• [U-Boot] [PATCH v2 5/5] arm, imx6: add aristainetos board   Heiko Schocher
• [U-Boot] [patch 0/2] SPL: Lightweight UBI and UBI fastmap support   Heiko Schocher
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Wolfgang Denk
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Ian Campbell
• [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single   Jagan Teki
• [U-Boot] [PATCH 0/2] cmd_ide: compile with clang and some cleanup   Jeroen Hofstee
• [U-Boot] [PATCH 1/2] common: cmd_ide: remove PIO mode   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] common: cmd_ide: use __weak and add prototypes   Jeroen Hofstee
• [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL   Jagan Teki
• [U-Boot] [PATCH v2 0/2] yaffs2: fix clang warnings and small cleanup   Jeroen Hofstee
• [U-Boot] [PATCH v2 1/2] yaffs2: cosmetic: remove self assignments   Jeroen Hofstee
• [U-Boot] [PATCH v2 2/2] yaffs2: preprocessor cleanup   Jeroen Hofstee
• [U-Boot] [PATCH v2] common: env_common: make env_get_char_spec __weak   Jeroen Hofstee
• [U-Boot] [PATCH v5 00/11] ARMv7: add PSCI support to U-Boot   Ian Campbell
• [U-Boot] [PATCH v5 01/11] ARM: HYP/non-sec: move switch to non-sec to the last boot phase   Ian Campbell
• [U-Boot] [PATCH v5 02/11] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Ian Campbell
• [U-Boot] [PATCH v5 03/11] ARM: non-sec: reset CNTVOFF to zero   Ian Campbell
• [U-Boot] [PATCH v5 04/11] ARM: add missing HYP mode constant   Ian Campbell
• [U-Boot] [PATCH v5 05/11] ARM: HYP/non-sec: add separate section for secure code   Ian Campbell
• [U-Boot] [PATCH v5 06/11] ARM: HYP/non-sec: allow relocation to secure RAM   Ian Campbell
• [U-Boot] [PATCH v5 07/11] ARM: HYP/non-sec: add generic ARMv7 PSCI code   Ian Campbell
• [U-Boot] [PATCH v5 08/11] ARM: HYP/non-sec: add the option for a second-stage monitor   Ian Campbell
• [U-Boot] [PATCH v5 09/11] ARM: convert arch_fixup_memory_node to a generic FDT fixup function   Ian Campbell
• [U-Boot] [PATCH v5 10/11] ARM: HYP/non-sec/PSCI: emit DT nodes   Ian Campbell
• [U-Boot] [PATCH v5 11/11] ARM: HYP/non-sec: remove MIDR check to validate CBAR   Ian Campbell
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Gupta, Pekon
• [U-Boot] [PATCH] arm: mxs: Scrub useless ifdef   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Stefan Roese
• [U-Boot] [PATCH] am335x_evm / gumstix pepper: Correct DDR settings   Jeroen Hofstee
• [U-Boot] [PATCH] mmc: prevent some warnings with make W=1   Jeroen Hofstee
• [U-Boot] [PATCH] board: rpi_b: include mmc header and fix prototype   Jeroen Hofstee
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   Gabriel Huau
• [U-Boot] [PATCHv2] socfpga: initialize designware ethernet   Pavel Machek
• [U-Boot] [PATCHv2] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   Wolfgang Denk
• [U-Boot] [PATCH] socfpga: timer actually counts down   Pavel Machek
• [U-Boot] [PATCH] lib/time.c cleanups   Pavel Machek
• [U-Boot] [PATCH] lib/time.c cleanups   Marek Vasut
• [U-Boot] [PATCH] socfpga: timer actually counts down   Marek Vasut
• [U-Boot] [PATCHv2] socfpga: initialize designware ethernet   Marek Vasut
• [U-Boot] [PATCH 1/6] cros_ec: Fix two bugs in the SPI implementation   Jagan Teki
• [U-Boot] [PATCH 2/6] exynos: spi: Fix calculation of SPI transaction start time   Jagan Teki
• [U-Boot] [PATCH 3/6] spi: Support half-duplex mode in FDT decode   Jagan Teki
• [U-Boot] [PATCH] sf: Stop leaking memory   Jagan Teki
• [U-Boot] [PATCH v2 03/29] stdio: Remove redundant code around stdio_register() calls   Simon Glass
• [U-Boot] [PATCH v1 0/25] Add Marvell Armada XP MV78460 SoC support   Jagan Teki
• [U-Boot] [PATCH v1 08/25] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Jagan Teki
• [U-Boot] [PATCH v1 11/25] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Jagan Teki
• [U-Boot] [PATCH v1 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Jagan Teki
• [U-Boot] [PATCH v1 01/25] sf: Add M25PX64 SPI NOR flash ID   Jagan Teki
• [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass   Simon Glass
• [U-Boot] [PATCH v2 1/9] serial: Set up the 'priv' pointer when creating a serial device   Simon Glass
• [U-Boot] [PATCH v2 2/9] dm: Add a uclass for serial devices   Simon Glass
• [U-Boot] [PATCH v2 3/9] Set up stdio earlier when using driver model   Simon Glass
• [U-Boot] [PATCH v2 4/9] sandbox: Convert serial driver to use driver model   Simon Glass
• [U-Boot] [PATCH v2 5/9] sandbox: serial: Support a coloured console   Simon Glass
• [U-Boot] [PATCH v2 6/9] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH v2 7/9] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
• [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v2 9/9] dm: Make driver model available before board_init()   Simon Glass
• [U-Boot] [PATCH v2 08/29] dm: Allow drivers to be marked 'before relocation'   Simon Glass
• [U-Boot] [PATCH] buildman: Add -F flag to retry failed builds   Simon Glass
• [U-Boot] [PATCH v2] board: rpi_b: include mmc header and fix prototype   Jeroen Hofstee
• [U-Boot] [PATCH] autoboot: add its own header   Jeroen Hofstee
• [U-Boot] [PATCH] common: cmd_mii: fix printf format warning   Jeroen Hofstee
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   gabriel huau
• [U-Boot] [PATCH 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Gupta, Pekon
• [U-Boot] arm builds fail with with CONFIG_USE_IRQ   Chris Packham
• [U-Boot] arm builds fail with with CONFIG_USE_IRQ   Chris Packham
• [U-Boot] arm builds fail with with CONFIG_USE_IRQ   Chris Packham
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Chris Packham
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Chris Packham
• [U-Boot] [PATCH v1] arm: include config.h in vectors.S   Chris Packham
• [U-Boot] [PATCH 1/4] mtdparts: fix usecount bug   Heiko Schocher
• [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
• [U-Boot] [PATCH 0/3] spi, sf: add mtdparts feature to spi and sf commands   Heiko Schocher
• [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver   Heiko Schocher
• [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Heiko Schocher
• [U-Boot] [PATCH 3/3] spi, sf: use offset and size in sf cmd from mtdpartition   Heiko Schocher
• [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single   Jagan Teki
• [U-Boot] [PATCH v2 1/5] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
• [U-Boot] [PATCH v3] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
• [U-Boot] [PATCH] board/ls2085a: Update env_addr after NOR flash relocation   Prabhakar Kushwaha
• [U-Boot] [PATCH] lib/time.c cleanups   Pavel Machek
• [U-Boot] [PATCHv3] socfpga: initialize designware ethernet   Pavel Machek
• [U-Boot] [PATCH] Ethernet: let user know if there is no valid ethernet address   Pavel Machek
• [U-Boot] [PATCHv3] socfpga: initialize designware ethernet   Marek Vasut
• [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] [PATCHv3] socfpga: initialize designware ethernet   Pavel Machek
• [U-Boot] [PATCH 0/3] Add .mailmap file and a tool to maintain it   Masahiro Yamada
• [U-Boot] [PATCH 1/3] add .mailmap for proper git-shortlog output   Masahiro Yamada
• [U-Boot] [PATCH 2/3] scripts: add mailmapper, a tool to create/update mailmap file   Masahiro Yamada
• [U-Boot] [PATCH 3/3] Update .mailmap using scripts/mailmapper   Masahiro Yamada
• [U-Boot] [Patch v1 2/4] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   Mark Rutland
• [U-Boot] ARMv8 spin-table patches   Mark Rutland
• [U-Boot] [PATCH] ARM: DRA7xx: Update the board_name env variable   Lokesh Vutla
• [U-Boot] [PATCH v1 0/25] Add Marvell Armada XP MV78460 SoC support   Tom Rini
• [U-Boot] [PATCH] ARM: DRA7xx: Update the board_name env variable   Tom Rini
• [U-Boot] [PATCH] socfpga: timer actually counts down   Tom Rini
• [U-Boot] [PATCH v2 1/2] boards.cfg: keep it sorted filling the board field   Tom Rini
• [U-Boot] [PATCH v2 2/2] boards.cfg: change "<none>" in the board field to "-"   Tom Rini
• [U-Boot] [PATCH] Fix help text of ext2load and fatload.   Tom Rini
• [U-Boot] [PATCH 0/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 2/4] omap3_beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 3/4] am335x_evm: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 4/4] rpi_b: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH v3] spi, spi_mxc: do not hang in spi_xchg_single   Jagan Teki
• [U-Boot] [PATCH v2 4/5] i.MX6: add enable_spi_clk()   Jagan Teki
• [U-Boot] [ANN] U-Boot v2014.07 released   Tom Rini
• [U-Boot] DM, Kconfig and clang changes   Tom Rini
• [U-Boot] DM, Kconfig and clang changes   Simon Glass
• [U-Boot] DM, Kconfig and clang changes   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.07 released   Stefan Roese
• [U-Boot] [ANN] U-Boot v2014.07 released   Tom Rini
• [U-Boot] ARM: omap: Looking to dynamically setup ECC and nand settings during boot   Jon Cormier
• [U-Boot] ARMv8 spin-table patches   York Sun
• [U-Boot] [PATCH 3/3] sf: ti_qspi: Enable EDMA for reads in SPL   Tom Rini
• [U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.07 released   Wolfgang Denk
• [U-Boot] DM, Kconfig and clang changes   Wolfgang Denk
• [U-Boot] [PATCH v1 1/7] TI: armv7: move board specific NAND configs out from ti_armv7_common.h and ti_am335x_common.h   Tom Rini
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Tom Rini
• [U-Boot] DM, Kconfig and clang changes   Tom Rini
• [U-Boot] [PATCH 0/6] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH 1/6] buildman: Add -F flag to retry failed builds   Simon Glass
• [U-Boot] [PATCH 2/6] buildman: Avoid retrying a build if it definitely failed   Simon Glass
• [U-Boot] [PATCH 3/6] buildman: Add -C option to force a reconfigure for each commit   Simon Glass
• [U-Boot] [PATCH 4/6] buildman: Support in-tree builds   Simon Glass
• [U-Boot] [PATCH 5/6] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH 6/6] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH 01/25] sandbox: Convert SPI flash emulation to use sf_params   Simon Glass
• [U-Boot] [PATCH 02/25] sandbox: config: Enable all SPI flash chips   Simon Glass
• [U-Boot] [PATCH 03/25] sandbox: dts: Add a SPI device and cros_ec device   Simon Glass
• [U-Boot] [PATCH 04/25] dm: spi: Move cmd device code into its own function   Simon Glass
• [U-Boot] [PATCH 05/25] spi: Add brackets and tidy defines in spi.h   Simon Glass
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH 07/25] dm: sandbox: Add a SPI emulation uclass   Simon Glass
• [U-Boot] [PATCH 08/25] dm: Remove spi_init() from board_r.c when using driver model   Simon Glass
• [U-Boot] [PATCH 09/25] dm: Add spi.h header to a few files   Simon Glass
• [U-Boot] [PATCH 10/25] dm: spi: Adjust cmd_spi to work with driver model   Simon Glass
• [U-Boot] [PATCH 11/25] dm: sandbox: spi: Move to driver model   Simon Glass
• [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
• [U-Boot] [PATCH 13/25] dm: exynos: Convert SPI to driver model   Simon Glass
• [U-Boot] [PATCH 14/25] sf: Add an empty entry to the parameter list   Simon Glass
• [U-Boot] [PATCH 15/25] sf: Tidy up public and private header files   Simon Glass
• [U-Boot] [PATCH 16/25] spi: Use error return value in sf_ops   Simon Glass
• [U-Boot] [PATCH 17/25] dm: sf: Add a uclass for SPI flash   Simon Glass
• [U-Boot] [PATCH 18/25] dm: Convert spi_flash_probe() and 'sf probe' to use driver model   Simon Glass
• [U-Boot] [PATCH 19/25] dm: sf: sandbox: Convert SPI flash driver to driver model   Simon Glass
• [U-Boot] [PATCH 20/25] dm: exynos: config: Use driver model for SPI flash   Simon Glass
• [U-Boot] [PATCH 21/25] dm: spi: Add tests   Simon Glass
• [U-Boot] [PATCH 22/25] dm: sf: Add tests for SPI flash   Simon Glass
• [U-Boot] [PATCH 23/25] dm: cros_ec: Add support for driver model   Simon Glass
• [U-Boot] [PATCH 24/25] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module   Simon Glass
• [U-Boot] [PATCH 25/25] dm: exynos: cros_ec: Move cros_ec_spi to driver model   Simon Glass
• [U-Boot] [PATCH v2 4/9] Add a simple malloc() implementation for pre-relocation   Graeme Russ
• [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot   Gupta, Pekon
• [U-Boot] [ANN] U-Boot v2014.07 released   Wolfgang Denk
• [U-Boot] DM, Kconfig and clang changes   Heiko Schocher
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   Stefano Babic
• [U-Boot] Fwd: Re: [PATCH 2/3] env_mmc: support env partition setup in runtime   Igor Grinberg
• [U-Boot] [PATCH v2 2/5] imx6: add gpr2 usb_otg_id iomux select control define   Stefano Babic
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Stefano Babic
• [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()   Stefano Babic
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Pavel Herrmann
• [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Pavel Herrmann
• [U-Boot] [PATCH v2 5/5] arm, imx6: add aristainetos board   Stefano Babic
• [U-Boot] [PATCH] driver/mtd: Use generic timer API for FSL IFC, eLBC   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Heiko Schocher
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Stefano Babic
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Heiko Schocher
• [U-Boot] SPL broken on i.mx31 platforms   Helmut Raiger
• [U-Boot] Tegra T30 support, bootcounting and watchdog   Gabriele Randelli
• [U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines   Stefano Babic
• [U-Boot] git pull fails ?!   Hannes Petermaier
• [U-Boot] git pull fails ?!   Wolfgang Denk
• [U-Boot] git pull fails ?!   Hannes Petermaier
• [U-Boot] [PATCH 0/3] Fix {c,e}tags/cscope build targets   Igor Grinberg
• [U-Boot] [PATCH 1/3] Makefile: fix the {c, e}tags/cscope build targets   Igor Grinberg
• [U-Boot] [PATCH 2/3] Makefile: fix ctags/etags clean targets   Igor Grinberg
• [U-Boot] [PATCH 3/3] Makefile: fix tags target documentation   Igor Grinberg
• [U-Boot] [PATCH v1 0/2] mtd,ubi,ubifs: sync with v3.15   Heiko Schocher
• [U-Boot] [PATCH v1 1/2] mtd, ubi, ubifs: update for the sync with linux v3.14   Heiko Schocher
• [U-Boot] [PATCH v1 2/2] mtd,ubi,ubifs: sync with linux v3.15   Heiko Schocher
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   gabriel huau
• [U-Boot] [PATCH] lcd: support displaying 24bpp BMPs on >= 24bpp LCDs   Hannes Petermaier
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   Stefano Babic
• [U-Boot] [PATCH v5] mx6: add support of multi-processor command   Gabriel Huau
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Roman B.
• [U-Boot] [PATCH] Fix help text of ext2load and fatload.   Pavel Machek
• [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Roman Byshko
• [U-Boot] [PATCH v2 1/5] sunxi: add defines to control USB Host clocks/resets   Roman Byshko
• [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver   Roman Byshko
• [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs   Roman Byshko
• [U-Boot] [PATCH v2 4/5] sun7i: add USB EHCI configuration   Roman Byshko
• [U-Boot] [PATCH v2 5/5] sun7i: cubietruck: enable USB EHCI   Roman Byshko
• [U-Boot] [U-boot] [Patch 0/6] Add support for k2e SoC and EVM   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/6] ARM: keystone2: add K2E SoC hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/6] ARM: keystone2: clock: add K2E clock support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: add MSMC cache coherency support for K2E SOC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 5/6] ARM: keystone2: spl: add K2E SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 6/6] board: k2e-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Roman B.
• [U-Boot] i.MX tree out of sync   Otavio Salvador
• [U-Boot] [PATCH] board/ls2085a: Add support of NOR and NAND flash for simulator   Prabhakar Kushwaha
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Ian Campbell
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Ian Campbell
• [U-Boot] [i2c] Pull request   Ian Campbell
• [U-Boot] i.MX tree out of sync   Stefano Babic
• [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [i2c] Pull request   Ian Campbell
• [U-Boot] [PATCH v2 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Marek Vasut
• [U-Boot] [YBA] mx28evk.h CONFIG_EHCI_MXS_PORT0 power?   Marek Vasut
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Rostislav Lisovy
• [U-Boot] [PATCH v2 0/3] Add .mailmap file and a tool to maintain it   Masahiro Yamada
• [U-Boot] [PATCH v2 1/3] add .mailmap for proper git-shortlog output   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] scripts: add mailmapper, a tool to create/update mailmap file   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] Update .mailmap using scripts/mailmapper   Masahiro Yamada
• [U-Boot] [PATCH v3 0/6] arm, imx6: add aristainetos board support   Heiko Schocher
• [U-Boot] [PATCH v3 1/6] imx6: add gpr2 usb_otg_id iomux select control define   Heiko Schocher
• [U-Boot] [PATCH v3 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines   Heiko Schocher
• [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6   Heiko Schocher
• [U-Boot] [PATCH v3 4/6] i.MX6: add enable_spi_clk()   Heiko Schocher
• [U-Boot] [PATCH v3 5/6] spi: add config option to enable the WP pin function on st micron flashes   Heiko Schocher
• [U-Boot] [PATCH v3 6/6] arm, imx6: add aristainetos board   Heiko Schocher
• [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6   Stefano Babic
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Marek Vasut
• [U-Boot] [PATCH v3 6/6] arm, imx6: add aristainetos board   Stefano Babic
• [U-Boot] [ANN] U-Boot v2014.07 released   Marek Vasut
• [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6   Heiko Schocher
• [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation   Lukasz Majewski
• [U-Boot] [PATCH v3 3/6] pwm, imx6: add support for pwm modul on imx6   Wolfgang Denk
• [U-Boot] [linux-sunxi] Re: [PATCH v2 2/5] sunxi: add USB EHCI driver   Hans de Goede
• [U-Boot] CPU Wachtog for P2041   Boschung, Rainer
• [U-Boot] DM, Kconfig and clang changes   Masahiro Yamada
• [U-Boot] [linux-sunxi] [PATCH v2 2/5] sunxi: add USB EHCI driver   Priit Laes
• [U-Boot] new dev question   David Nelson
• [U-Boot] socfpga: initialize MMC   Pavel Machek
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Wolfgang Denk
• [U-Boot] socfpga: initialize MMC   Wolfgang Denk
• [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot   Jon Cormier
• [U-Boot] [PATCH 0/5] ARM: Allwinner sun7i (A20) USB Host EHCI support   Roman B.
• [U-Boot] socfpga: initialize MMC   Wolfgang Denk
• [U-Boot] CPU Wachtog for P2041   York Sun
• [U-Boot] ARMv8 spin-table patches   Mark Rutland
• [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver   Daniel Schwierzeck
• [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot   Gupta, Pekon
• [U-Boot] [PATCH v2 1/5] sunxi: add defines to control USB Host clocks/resets   Ian Campbell
• [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs   Ian Campbell
• [U-Boot] [PATCH v2 4/5] sun7i: add USB EHCI configuration   Ian Campbell
• [U-Boot] [PATCH v2 5/5] sun7i: cubietruck: enable USB EHCI   Ian Campbell
• [U-Boot] Please pull u-boot-sunxi.git/next   Ian Campbell
• [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape   Tom Rini
• [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape   Tom Rini
• [U-Boot] [PATCH v1 3/7] arm: lib: continue board_init_r even if valid flash device is not detected   Tom Rini
• [U-Boot] [PATCH v1 6/7] board/ti/am43xx: add support for parallel NAND   Tom Rini
• [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND   Tom Rini
• [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot   Jon Cormier
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Tom Rini
• [U-Boot] omap: Looking to dynamically setup ECC and nand settings during boot   Tom Rini
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Ian Campbell
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Masahiro Yamada
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Brian Norris
• [U-Boot] [PATCH] .gitignore: clean-up unnecessary entries   Masahiro Yamada
• [U-Boot] [PATCH 1/3] mtd, spi: add MTD layer driver   Heiko Schocher
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Simon Glass
• [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Pavel Herrmann
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Pavel Herrmann
• [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH v2 3/5] sunxi: add USB options to configs   Marek Vasut
• [U-Boot] [PATCH] powerpc/83xx: add support for kmtepr2 board   Holger Brunck
• [U-Boot] [PATCH 0/3] Do not hard-code the command name 'make' in upper-level tools   Masahiro Yamada
• [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command   Masahiro Yamada
• [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make   Masahiro Yamada
• [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make   Masahiro Yamada
• [U-Boot] [PATCH] socfpga: timer actually counts down   Chin Liang See
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Hans de Goede
• [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND   Gupta, Pekon
• [U-Boot] socfpga: initialize MMC   Chin Liang See
• [U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag   Lubomir Rintel
• [U-Boot] Enabling multiple serial ports for OMAP3 EVM on u-boot 2014.04   Lnijalin
• [U-Boot] socfpga: initialize MMC   Wolfgang Denk
• [U-Boot] [PATCH] kmp204x: set the ZL clk chips reset to power up only   Valentin Longchamp
• [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   Valentin Longchamp
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   Wolfgang Denk
• [U-Boot] [PATCH v1 7/7] board/ti/dra7xx: add support for parallel NAND   Tom Rini
• [U-Boot] uboot/odroid test report   Marek Szyprowski
• [U-Boot] [PATCH v5 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
• [U-Boot] [PATCH v5 01/12] samsung: misc: fix soc revision setting in the set_board_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v5 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Przemyslaw Marczak
• [U-Boot] [PATCH v5 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
• [U-Boot] [PATCH v5 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 05/12] samsung: misc: add function for setting $dfu_alt_info   Przemyslaw Marczak
• [U-Boot] [PATCH v5 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v5 07/12] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH v5 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
• [U-Boot] [PATCH v5 09/12] samsung: misc: use board specific functions to set env board info   Przemyslaw Marczak
• [U-Boot] [PATCH v5 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH v5 11/12] odroid: add odroid U3/X2 device tree description   Przemyslaw Marczak
• [U-Boot] [PATCH v5 12/12] odroid: add odroid_config   Przemyslaw Marczak
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] ARM: 743626—An imprecise external abort, received while the processor enters WFI, may cause a processor deadlock   Manyam
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] uboot/odroid test report   Przemyslaw Marczak
• [U-Boot] uboot/odroid test report   Przemyslaw Marczak
• [U-Boot] uboot/odroid test report   Przemyslaw Marczak
• [U-Boot] [PATCH v2 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Simon Glass
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] uboot/odroid test report   Daniel Drake
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Pavel Herrmann
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Pavel Herrmann
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Ian Campbell
• [U-Boot] ARM: 743626—An imprecise external abort, received while the processor enters WFI, may cause a processor deadlock   Jeroen Hofstee
• [U-Boot] DM, Kconfig and clang changes   Jeroen Hofstee
• [U-Boot] [PATCH v4 0/6] arm, imx6: add aristainetos board support   Heiko Schocher
• [U-Boot] [PATCH v4 1/6] imx6: add gpr2 usb_otg_id iomux select control define   Heiko Schocher
• [U-Boot] [PATCH v4 2/6] i.MX6: define struct pwm_regs and PWMCR_* defines   Heiko Schocher
• [U-Boot] [PATCH v4 3/6] pwm, imx6: add support for pwm modul on imx6   Heiko Schocher
• [U-Boot] [PATCH v4 4/6] i.MX6: add enable_spi_clk()   Heiko Schocher
• [U-Boot] [PATCH v4 5/6] spi: add config option to enable the WP pin function on st micron flashes   Heiko Schocher
• [U-Boot] [PATCH v4 6/6] arm, imx6: add aristainetos board   Heiko Schocher
• [U-Boot] [PATCH v2 0/3] spi, sf: add mtdparts feature to spi and sf commands   Heiko Schocher
• [U-Boot] [PATCH v2 1/3] mtd, spi: add MTD layer driver   Heiko Schocher
• [U-Boot] [PATCH v2 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Heiko Schocher
• [U-Boot] [PATCH v2 3/3] spi, sf: use offset and size in sf cmd from mtdpartition   Heiko Schocher
• [U-Boot] [PATCH] patman: make "No recipient" checking more tolerant   Masahiro Yamada
• [U-Boot] [PATCH] ARM: OMAP: Fix handling of errata i727   Lokesh Vutla
• [U-Boot] [PATCH v2 0/2] ARM: atmel: sama5d3xek: enable NOR flash support   Bo Shen
• [U-Boot] [PATCH v2 1/2] ARM: atmel: sama5d3xek: add nor flash init function   Bo Shen
• [U-Boot] [PATCH v2 2/2] ARM: atmel: sama5d3xek: enable NOR flash support   Bo Shen
• [U-Boot] [PATCH] km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAM   Valentin Longchamp
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Hans de Goede
• [U-Boot] [PATCH v1 0/3] ARM: omap: clean GPMC macros   Pekon Gupta
• [U-Boot] [PATCH v1 1/3] ARM: omap: fix GPMC address-map size for NAND and NOR devices   Pekon Gupta
• [U-Boot] [PATCH v1 2/3] ARM: omap: clean redundant PISMO_xx macros used in OMAP3   Pekon Gupta
• [U-Boot] [PATCH v1 3/3] ARM: omap: move board specific NAND configs out from ti_armv7_common.h   Pekon Gupta
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   Benoit Sansoni
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Ian Campbell
• [U-Boot] Random number generator - why I need it   Stanislav Vlasic
• [U-Boot] uboot/odroid test report   Przemyslaw Marczak
• [U-Boot] [PATCH v4] Add TQ Systems TQMa6 board support   Markus Niebel
• [U-Boot] [PATCH v6 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
• [U-Boot] [PATCH v6 01/12] samsung: misc: fix soc revision setting in the set_board_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v6 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Przemyslaw Marczak
• [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
• [U-Boot] [PATCH v6 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 05/12] samsung: misc: add function for setting $dfu_alt_info   Przemyslaw Marczak
• [U-Boot] [PATCH v6 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v6 07/12] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH v6 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
• [U-Boot] [PATCH v6 09/12] samsung: misc: use board specific functions to set env board info   Przemyslaw Marczak
• [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH v6 11/12] odroid: add odroid U3/X2 device tree description   Przemyslaw Marczak
• [U-Boot] [PATCH v6 12/12] odroid: add odroid_config   Przemyslaw Marczak
• [U-Boot] [PATCH 1/5] am335x_evm: Move SPL network defines   Tom Rini
• [U-Boot] [PATCH v3 2/5] TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR   Tom Rini
• [U-Boot] [PATCH 3/5] tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND   Tom Rini
• [U-Boot] [PATCH 4/5] common/Makefile: Consolidate SPL ENV options, correct inclusion   Tom Rini
• [U-Boot] [PATCH 5/5] am335x_evm: Enable CONFIG_SPL_ENV_SUPPORT on EMMC_BOOT   Tom Rini
• [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Siarhei Siamashka
• [U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function   Siarhei Siamashka
• [U-Boot] [PATCH 02/14] sunxi: dram: Remove broken super-standby remnants   Siarhei Siamashka
• [U-Boot] [PATCH 03/14] sunxi: dram: Respect the DDR3 reset timing requirements   Siarhei Siamashka
• [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling   Siarhei Siamashka
• [U-Boot] [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration   Siarhei Siamashka
• [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Siarhei Siamashka
• [U-Boot] [PATCH 07/14] sunxi: dram: Use divisor P=1 for PLL5   Siarhei Siamashka
• [U-Boot] [PATCH 08/14] sunxi: dram: Improve DQS gate data training error handling   Siarhei Siamashka
• [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Siarhei Siamashka
• [U-Boot] [PATCH 10/14] sunxi: dram: Configurable DQS gating window mode and delay   Siarhei Siamashka
• [U-Boot] [PATCH 11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13)   Siarhei Siamashka
• [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory   Siarhei Siamashka
• [U-Boot] [PATCH 13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed   Siarhei Siamashka
• [U-Boot] [PATCH 14/14] sunxi: dram: Autodetect DDR3 bus width and density   Siarhei Siamashka
• [U-Boot] [PATCH 0/2] sunxi: FEL boot mode improvements   Siarhei Siamashka
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Siarhei Siamashka
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Siarhei Siamashka
• [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command   Jeroen Hofstee
• [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Jeroen Hofstee
• [U-Boot] Random number generator - why I need it   Jeroen Hofstee
• [U-Boot] [U-boot] question about nand_scan_bbt()   Scott Wood
• [U-Boot] [PATCH v2 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] Please pull u-boot-sunxi.git/master   Ian Campbell
• [U-Boot] [PATCH v3 0/3] sunxi: AHCI support   Ian Campbell
• [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms   Ian Campbell
• [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too   Ian Campbell
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
• [U-Boot] Please pull u-boot-sunxi.git/master   Siarhei Siamashka
• [U-Boot] Please pull u-boot-sunxi.git/master   Ian Campbell
• [U-Boot] [PATCH v5 0/2] PSCI backend for sun7i   Ian Campbell
• [U-Boot] [PATCH v5 1/2] sunxi: HYP/non-sec: add sun7i PSCI backend   Ian Campbell
• [U-Boot] [PATCH v5 2/2] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs   Ian Campbell
• [U-Boot] [PATCH] net: phy/cortina: Add four phy addresses support   York Sun
• [U-Boot] [PATCH] net: phy/cortina: Add four phy addresses support   York Sun
• [U-Boot] [PATCH v5] net/phy: Add support for CS4315/CS4340 PHY   York Sun
• [U-Boot] CPU Wachtog for P2041   York Sun
• [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled   York Sun
• [U-Boot] [PATCH 0/4] Introducing the Broadcom Cygnus and NSP boards.   Steve Rae
• [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code   Steve Rae
• [U-Boot] [PATCH 2/4] arm: bcmcygnus: Add bcmcygnus u-architecture   Steve Rae
• [U-Boot] [PATCH 3/4] arm: bcmnsp: Add bcmnsp u-architecture   Steve Rae
• [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards   Steve Rae
• [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too   Simon Glass
• [U-Boot] [PATCH v2 17/29] dm: Introduce device sequence numbering   Simon Glass
• [U-Boot] [PATCH v3] Implement generalised RSA public exponents for verified boot   Simon Glass
• [U-Boot] [PATCH 1/2] spi: ST33ZP24 SPI TPM driver   Simon Glass
• [U-Boot] [PATCH 2/2] i2c: ST33ZP24 I2C TPM driver   Simon Glass
• [U-Boot] WIP for SPI   Simon Glass
• [U-Boot] [PATCH] patman: make "No recipient" checking more tolerant   Simon Glass
• [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make   Simon Glass
• [U-Boot] [PATCH 2/3] MAKEALL: make sure to invoke GNU Make   Simon Glass
• [U-Boot] [PATCH v1 0/3] ARM: omap: clean GPMC macros   Gupta, Pekon
• [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Hans de Goede
• [U-Boot] socfpga: initialize MMC   Pavel Machek
• [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms   Hans de Goede
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Hans de Goede
• [U-Boot] Micrel KSZ9692 boot loader issue   sujithkuroor
• [U-Boot] [PATCH] whitespace cleanups   Pavel Machek
• [U-Boot] [patch] socfpga: fix clock manager register definition   Pavel Machek
• [U-Boot] [PATCH] whitespace cleanups   Jeroen Hofstee
• [U-Boot] [patch] socfpga: fix clock manager register definition   Marek Vasut
• [U-Boot] [patch] socfpga: fix clock manager register definition   Pavel Machek
• [U-Boot] [PATCH] whitespace cleanups   Pavel Machek
• [U-Boot] [PATCH] whitespace cleanups   Jeroen Hofstee
• [U-Boot] [patch] socfpga: fix clock manager register definition   Marek Vasut
• [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH 1/3] AHCI: Increase link timeout to 200ms   Ian Campbell
• [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code   Wolfgang Denk
• [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards   Wolfgang Denk
• [U-Boot] Bug u-boot-tools: /usr/include/image.h gets included instead of <WC>/include/image.h   disposable at gmx.net
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   Prafulla Wadaskar
• [U-Boot] [PATCH V5: 5/5] Add documentation for dns-32{0,5}   Bastien ROUCARIES
• [U-Boot] [PATCH] Makefile: replace stat -c %s with wc   Jeroen Hofstee
• [U-Boot] [PATCH 3/3] buildman: make sure to invoke GNU Make   Jeroen Hofstee
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH] Makefile: replace stat -c %s with wc   Simon Glass
• [U-Boot] [PATCH v1 2/7] board/ti/am335x: add support for beaglebone NAND cape   Gupta, Pekon
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Lisovy Rostislav
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Wolfgang Denk
• [U-Boot] [PATCH] cmd_nand/cmd_ubi/cmd_nboot: Set environment variable 'filesize'   Lisovy Rostislav
• [U-Boot] [PATCH] RTC: add support for DS1339 (using DS1307 driver)   Markus Niebel
• [U-Boot] socfpga: initialize MMC   Pavel Machek
• [U-Boot] [PATCH v1 4/7] board/ti/am335x: add support for beaglebone NOR Cape   Gupta, Pekon
• [U-Boot] [PATCH] socfpga: cleanup socfpga_dw_mmc   Pavel Machek
• [U-Boot] [PATCH] socfpga: cleanup socfpga_dw_mmc   Chin Liang See
• [U-Boot] socfpga: initialize MMC   Wolfgang Denk
• [U-Boot] [PATCHv2] socfpga: cleanup socfpga_dw_mmc   Pavel Machek
• [U-Boot] socfpga: initialize MMC   Pavel Machek
• [U-Boot] WIP for SPI   Jon Loeliger
• [U-Boot] How to find latest stable uboot version currently.   Rohit Jindal
• [U-Boot] [PATCH v5] net/phy: Add support for CS4315/CS4340 PHY   Joe Hershberger
• [U-Boot] [PATCH 1/3] i2c: tegra: use repeated start for reads   Stephen Warren
• [U-Boot] [PATCH] esd:cmd_loadpci.c: Switch from "do_source" to "source"   Tom Rini
• [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation   Stephen Warren
• [U-Boot] Bug u-boot-tools: /usr/include/image.h gets included instead of <WC>/include/image.h   Jeroen Hofstee
• [U-Boot] [PATCH] board_r: Add missing return to initr_doc   Ian Campbell
• [U-Boot] [PATCH 2/3] board_r: run scsi init() on ARM too   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Ian Campbell
• [U-Boot] [PATCH 01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function   Ian Campbell
• [U-Boot] [PATCH 02/14] sunxi: dram: Remove broken super-standby remnants   Ian Campbell
• [U-Boot] [PATCH 03/14] sunxi: dram: Respect the DDR3 reset timing requirements   Ian Campbell
• [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling   Ian Campbell
• [U-Boot] [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration   Ian Campbell
• [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Ian Campbell
• [U-Boot] [PATCH 07/14] sunxi: dram: Use divisor P=1 for PLL5   Ian Campbell
• [U-Boot] [PATCH 08/14] sunxi: dram: Improve DQS gate data training error handling   Ian Campbell
• [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Ian Campbell
• [U-Boot] [PATCH 11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13)   Ian Campbell
• [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory   Ian Campbell
• [U-Boot] [PATCH 13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed   Ian Campbell
• [U-Boot] [PATCH 14/14] sunxi: dram: Autodetect DDR3 bus width and density   Ian Campbell
• [U-Boot] [PATCH 00/14] sunxi: Allwinner A10/A13/A20 DRAM controller fixes   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Jeroen Hofstee
• [U-Boot] mtd: cfi_flash: fix clang warning   Tom Rini
• [U-Boot] lib: div64: add missing include   Tom Rini
• [U-Boot] common: commands: make commands static   Tom Rini
• [U-Boot] common: board_f: cosmetic use __weak for leds   Tom Rini
• [U-Boot] dm: add missing includes   Tom Rini
• [U-Boot] common:splash: use __weak   Tom Rini
• [U-Boot] lib:lmb: use __weak   Tom Rini
• [U-Boot] common: main.c: make show_boot_progress __weak   Tom Rini
• [U-Boot] lib:sha1: remove unused constant   Tom Rini
• [U-Boot] env_callback.h: spl: mark callback as maybe_unused   Tom Rini
• [U-Boot] lib:vsprintf: reduce scope of pack_hex_byte   Tom Rini
• [U-Boot] dirvers: mmc: use __weak   Tom Rini
• [U-Boot] common: bootm_os: make arch_preboot_os __weak   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] yaffs2: cosmetic: remove self assignments   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] yaffs2: preprocessor cleanup   Tom Rini
• [U-Boot] [U-Boot, v2] common: env_common: make env_get_char_spec __weak   Tom Rini
• [U-Boot] mmc: prevent some warnings with make W=1   Tom Rini
• [U-Boot] [U-Boot, v2] board: rpi_b: include mmc header and fix prototype   Tom Rini
• [U-Boot] autoboot: add its own header   Tom Rini
• [U-Boot] common: cmd_mii: fix printf format warning   Tom Rini
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Ian Campbell
• [U-Boot] [PATCH v2 01/10] arm: ls102xa: Add Freescale LS102xA SoC support   York Sun
• [U-Boot] [PATCH] esd:cmd_loadpci.c: Switch from "do_source" to "source"   Tom Rini
• [U-Boot] [PATCH] driver/mtd: Use generic timer API for FSL IFC, eLBC   Scott Wood
• [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings   Stefan Agner
• [U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards   Steve Rae
• [U-Boot] [PATCH 1/4] arm: iproc: Initial commit of iproc architecture code   Steve Rae
• [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support   Marek Vasut
• [U-Boot] [PATCH 02/12] arm: s3c24xx: Fix incorrect CONFIG_SYS_S3C2410_NAND_HWECC name   Marek Vasut
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Marek Vasut
• [U-Boot] [PATCH 04/12] mtd: nand: s3c: Unify the register definition and naming   Marek Vasut
• [U-Boot] [PATCH 05/12] mtd: nand: s3c: Add S3C2440 specifics   Marek Vasut
• [U-Boot] [PATCH 06/12] mtd: nand: s3c: Add S3C2440 buffer reading   Marek Vasut
• [U-Boot] [PATCH 07/12] mtd: nand: s3c: Add missing correction and select_chip functions   Marek Vasut
• [U-Boot] [PATCH 08/12] i2c: s3c: Implant support for S3C2440   Marek Vasut
• [U-Boot] [PATCH 09/12] gpio: s3c: Fix the GPIO driver   Marek Vasut
• [U-Boot] [PATCH 10/12] arm: s3c: Unify the S3C24xx SDI structure   Marek Vasut
• [U-Boot] [PATCH 11/12] mmc: s3c: Add SD driver   Marek Vasut
• [U-Boot] [PATCH 12/12] net: smc911x: Keep MAC programmed   Marek Vasut
• [U-Boot] [PATCH 0/2] Now all the M68K boards can be cleanly built   Masahiro Yamada
• [U-Boot] [PATCH 1/2] m68k: fix an undefined behavior warning of M5253DEMO board   Masahiro Yamada
• [U-Boot] [PATCH 2/2] m68k: define __kernel_size_t as unsinged int again   Masahiro Yamada
• [U-Boot] [PATCH v2 0/3] Do not hard-code the command name 'make' in higher-level tools   Masahiro Yamada
• [U-Boot] [PATCH v2 1/3] scripts: add scripts/show-gnu-make to get GNU Make command name   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] MAKEALL: make sure to invoke GNU Make   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] buildman: make sure to invoke GNU Make   Masahiro Yamada
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Masahiro Yamada
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Brian Norris
• [U-Boot] Silly question regarding mx28_adjust_mac and MAC OUIs?   Stuart Longland
• [U-Boot] About verify uboot   Duxiaoqiang
• [U-Boot] socfpga: initialize MMC   Jaehoon Chung
• [U-Boot] m68k: Build problems on some boards   Masahiro Yamada
• [U-Boot] [PATCH 1/3] scripts: add scripts/gnu_make to not hard-code make command   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields   Masahiro Yamada
• [U-Boot] [PATCHv2] socfpga: cleanup socfpga_dw_mmc   Chin Liang See
• [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields   Bo Shen
• [U-Boot] [PATCH 0/10] Drop mpc8xx, mpc82xx boards which are orphaned or have no maintainers   Masahiro Yamada
• [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers   Masahiro Yamada
• [U-Boot] [PATCH 02/10] powerpc: mpc8260: remove ppmc8260 board support   Masahiro Yamada
• [U-Boot] [PATCH 03/10] powerpc: mpc824x: remove MUSENKI and Sandpoint8245 board support   Masahiro Yamada
• [U-Boot] [PATCH 04/10] powerpc: mpc8xx: remove stxxtc board support   Masahiro Yamada
• [U-Boot] [PATCH 05/10] powerpc: mpc8xx: remove svm_sc8xx board   Masahiro Yamada
• [U-Boot] [PATCH 06/10] powerpc: mpc8xx: remove SXNI855T board support   Masahiro Yamada
• [U-Boot] [PATCH 07/10] powerpc: mpc8xx: remove GEN860T, GEN806T_SC board support   Masahiro Yamada
• [U-Boot] [PATCH 08/10] powerpc: mpc8xx: remove FLAGADM board support   Masahiro Yamada
• [U-Boot] [PATCH 09/10] powerpc: mpc8260: remove sacsng board support   Masahiro Yamada
• [U-Boot] [PATCH 10/10] powerpc: mpc8260: remove ep8260 board support   Masahiro Yamada
• [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation   Lukasz Majewski
• [U-Boot] [PATCH] ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute path   Lukasz Majewski
• [U-Boot] socfpga: initialize MMC   Pavel Machek
• [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support   Wolfgang Denk
• [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers   Wolfgang Denk
• [U-Boot] [PATCH] socfpga: Fix SOCFPGA build error for Altera dev kit   Chin Liang See
• [U-Boot] socfpga: initialize MMC   Chin Liang See
• [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] board/ti/xxx: Add NAND and NOR support for new TI boards   Pekon Gupta
• [U-Boot] [PATCH v2 1/6] board/ti/am335x: update configs for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH v2 2/6] board/ti/am335x: add support for beaglebone NAND cape   Pekon Gupta
• [U-Boot] [PATCH v2 3/6] board/ti/am335x: add support for beaglebone NOR Cape   Pekon Gupta
• [U-Boot] [PATCH v2 4/6] board/ti/am43xx: add support for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH v2 5/6] board/ti/dra7xx: add support for parallel NAND   Pekon Gupta
• [U-Boot] [PATCH v2 6/6] board/ti/dra7xx: add support for parallel NOR   Pekon Gupta
• [U-Boot] [PATCH] usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host mode   Daniel Mack
• [U-Boot] [PATCH] h2200: Disable SHA256 on FIT images   Tom Rini
• [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers   Wolfgang Denk
• [U-Boot] [PATCH] boards.cfg: re-claim ownership for TQM8xx boards   Wolfgang Denk
• [U-Boot] [PATCH 01/10] powerpc: mpc8xx: remove some of tqm8xx board family without maintainers   Masahiro Yamada
• [U-Boot] ODROID dynamic memory initialization   Daniel Drake
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Tom Rini
• [U-Boot] [PATCH] dfu: fix: Add the absolute path to the file name for ext4 write operation   Marek Vasut
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH] doc: README.android-fastboot: Add note about vendor ID   Clifton Barnes
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v4 01/15] kconfig: import Kconfig files from Linux 3.16-rc6   Masahiro Yamada
• [U-Boot] [PATCH v4 02/15] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 03/15] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v4 04/15] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v4 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH v4 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 07/15] Do not apply: tools: add gen_maintainers.py   Masahiro Yamada
• [U-Boot] [PATCH v4 08/15] Add MAINTAINERS files   Masahiro Yamada
• [U-Boot] [PATCH v4 09/15] tools: add genboardscfg   Masahiro Yamada
• [U-Boot] [PATCH v4 10/15] kconfig: remove mkconfig and boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v4 11/15] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 12/15] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 13/15] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH v4 14/15] powerpc: remove redundant CPU definition   Masahiro Yamada
• [U-Boot] [PATCH v4 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] [PATCH] doc: README.android-fastboot: Add note about vendor ID   Rob Herring
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   Pantelis Antoniou
• [U-Boot] [PATCH v3 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH] boards.cfg: re-claim ownership for TQM8xx boards   Tom Rini
• [U-Boot] [PATCH] h2200: Disable SHA256 on FIT images   Tom Rini
• [U-Boot] [U-Boot,1/2] sparc: merge LEON3 linker scripts   Tom Rini
• [U-Boot] [U-Boot, 2/2] sparc: merge LEON2 and LEON3 linker scripts   Tom Rini
• [U-Boot] [U-Boot, v4, 1/2] linux/compat.h: port lower_32_bits and upper_32_bits from Linux   Tom Rini
• [U-Boot] [U-Boot, v4, 2/2] driver/usb: include upper/lower_32_bits() from linux/compat.h   Tom Rini
• [U-Boot] tools: compiler.h: add missing time.h   Tom Rini
• [U-Boot] Fix help text of ext2load and fatload.   Tom Rini
• [U-Boot] catch wrong load address passed to fatload / ext2load   Tom Rini
• [U-Boot] spl: nand: read only in the size of image_header on the first access   Tom Rini
• [U-Boot] bootp can use mdelay   Tom Rini
• [U-Boot] [U-Boot, 1/3] serial: ns16550: drop CONFIG_OMAP1610 from the special case   Tom Rini
• [U-Boot] [U-Boot, 2/3] serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisor   Tom Rini
• [U-Boot] [U-Boot, 3/3] serial: ns16550: use a const variable instead of macro   Tom Rini
• [U-Boot] [U-Boot,1/2] common: cmd_ide: remove PIO mode   Tom Rini
• [U-Boot] [U-Boot, 2/2] common: cmd_ide: use __weak and add prototypes   Tom Rini
• [U-Boot] lib/time.c cleanups   Tom Rini
• [U-Boot] [U-Boot, 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Tom Rini
• [U-Boot] [U-Boot, 2/4] omap3_beagle: handle import of environments in files with CRLF as line endings   Tom Rini
• [U-Boot] [U-Boot, 3/4] am335x_evm: handle import of environments in files with CRLF as line endings   Tom Rini
• [U-Boot] [U-Boot, 4/4] rpi_b: handle import of environments in files with CRLF as line endings   Tom Rini
• [U-Boot] [U-Boot, 1/3] Makefile: fix the {c, e}tags/cscope build targets   Tom Rini
• [U-Boot] [U-Boot,2/3] Makefile: fix ctags/etags clean targets   Tom Rini
• [U-Boot] [U-Boot,3/3] Makefile: fix tags target documentation   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] add .mailmap for proper git-shortlog output   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] scripts: add mailmapper, a tool to create/update mailmap file   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] Update .mailmap using scripts/mailmapper   Tom Rini
• [U-Boot] .gitignore: clean-up unnecessary entries   Tom Rini
• [U-Boot] [U-Boot,1/3] AHCI: Increase link timeout to 200ms   Tom Rini
• [U-Boot] [U-Boot,2/3] board_r: run scsi init() on ARM too   Tom Rini
• [U-Boot] whitespace cleanups   Tom Rini
• [U-Boot] [PATCH 1/2] m68k: fix an undefined behavior warning of M5253DEMO board   Tom Rini
• [U-Boot] [PATCH 2/2] m68k: define __kernel_size_t as unsinged int again   Tom Rini
• [U-Boot] [PATCH 0/2] Now all the M68K boards can be cleanly built   Tom Rini
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Brian Norris
• [U-Boot] [PATCH 12/12] net: smc911x: Keep MAC programmed   Joe Hershberger
• [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers   York Sun
• [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers   York Sun
• [U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2   York Sun
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Tom Rini
• [U-Boot] [PATCH v2 0/4] Introducing the Broadcom Cygnus and NSP boards.   Steve Rae
• [U-Boot] [PATCH v2 1/4] arm: iproc: Initial commit of iproc architecture code   Steve Rae
• [U-Boot] [PATCH v2 2/4] arm: bcmcygnus: Add bcmcygnus u-architecture   Steve Rae
• [U-Boot] [PATCH v2 3/4] arm: bcmnsp: Add bcmnsp u-architecture   Steve Rae
• [U-Boot] [PATCH v2 4/4] arm: add Cygnus and NSP boards   Steve Rae
• [U-Boot] [PATCH] powerpc/t104xrdb: Add T1042RDB board support   York Sun
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   York Sun
• [U-Boot] [PATCH] pxe: clear Bootfile before returning   Stephen Warren
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Chris Packham
• [U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers   Shaohui Xie
• [U-Boot] Please update doc/git-mailrc   Masahiro Yamada
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Masahiro Yamada
• [U-Boot] [PATCH 01/12] video: Add S3C24xx framebuffer support   Marek Vasut
• [U-Boot] [PATCH] ARM: zynq: Enable generic board for Xilinx Zynq   Masahiro Yamada
• [U-Boot] [PATCH] ARM: zynq: Show ECC status on the same line as DRAM size   Masahiro Yamada
• [U-Boot] [PATCH v2] zynq: disable -Wstrict-prototypes option for ps7_init.c   Masahiro Yamada
• [U-Boot] [PATCH v1 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards   Dirk Eibach
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   Benoit Sansoni
• [U-Boot] [PATCH] board/freescale: use generic board architecture for t2080qds and t2080rdb   Shengzhou Liu
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Ian Campbell
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Make boot flag effective   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 2/2] powerpc/t104xrdb: support deep sleep in SPI/SD boot   Yuantian.Tang at freescale.com
• [U-Boot] Hi, Problem about verify uboot   Simon Glass
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Simon Glass
• [U-Boot] [PATCH] board_r: Add missing return to initr_doc   Simon Glass
• [U-Boot] [PATCH] embestmx6boards: convert to generic board   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6: soc: Do not apply the PFD erratum for mx6solox   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add PFUZE100 PMIC support   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox   Stefano Babic
• [U-Boot] [PATCH] arm: mxs: Scrub useless ifdef   Stefano Babic
• [U-Boot] [PATCH v4 0/6] arm, imx6: add aristainetos board support   Stefano Babic
• [U-Boot] [PATCH v4] Add TQ Systems TQMa6 board support   Stefano Babic
• [U-Boot] WIP for SPI   Simon Glass
• [U-Boot] FSL eSPI driver is a mess, hack attached.   Eliot Dudley
• [U-Boot] [PATCH v2] powerpc/t104xrdb: Add T1042RDB board support   Vijay Rai
• [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Simon Glass
• [U-Boot] [PATCH 1/8] exynos: Rename -dt config files to -common   Simon Glass
• [U-Boot] [PATCH 2/8] exynos: Move common exynos settings into a common file   Simon Glass
• [U-Boot] [PATCH 3/8] exynos: Move common smdk5420 things to common file   Simon Glass
• [U-Boot] [PATCH 4/8] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
• [U-Boot] [PATCH 5/8] config: Move arndale to use common exynos5250 file   Simon Glass
• [U-Boot] [PATCH 6/8] config: Move smdkv310 to use common exynos4 file   Simon Glass
• [U-Boot] [PATCH 7/8] samsung: Move s5p_goni to use exynos-common config   Simon Glass
• [U-Boot] [PATCH 8/8] samsung: Move smdkc100 to use exynos-common config   Simon Glass
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v3 5/9] arm: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] ODROID dynamic memory initialization   Daniel Drake
• [U-Boot] [PATCH] powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-boot   Vijay Rai
• [U-Boot] [PATCH v3 0/29] Add additional core driver model features   Simon Glass
• [U-Boot] [PATCH v3 01/29] dm: gpio: Don't use the driver model uclass for SPL   Simon Glass
• [U-Boot] [PATCH v3 02/29] dm: Use an explicit expect value in core tests   Simon Glass
• [U-Boot] [PATCH v3 03/29] stdio: Remove redundant code around stdio_register() calls   Simon Glass
• [U-Boot] [PATCH v3 04/29] stdio: Pass device pointer to stdio methods   Simon Glass
• [U-Boot] [PATCH v3 05/29] dm: Make sure that the root device is probed   Simon Glass
• [U-Boot] [PATCH v3 06/29] dm: Provide a way to shut down driver model   Simon Glass
• [U-Boot] [PATCH v3 07/29] sandbox: Remove all drivers before exit   Simon Glass
• [U-Boot] [PATCH v3 08/29] dm: Allow drivers to be marked 'before relocation'   Simon Glass
• [U-Boot] [PATCH v3 09/29] dm: Support driver model prior to relocation   Simon Glass
• [U-Boot] [PATCH v3 10/29] stdio: Provide functions to add/remove devices using stdio_dev   Simon Glass
• [U-Boot] [PATCH v3 11/29] console: Remove vprintf() optimisation for sandbox   Simon Glass
• [U-Boot] [PATCH v3 12/29] Add a flag indicating when the serial console is ready   Simon Glass
• [U-Boot] [PATCH v3 13/29] dm: Move uclass error checking/probing into a function   Simon Glass
• [U-Boot] [PATCH v3 14/29] fdt: Add a function to get the alias sequence of a node   Simon Glass
• [U-Boot] [PATCH v3 15/29] dm: Move device display into its own function   Simon Glass
• [U-Boot] [PATCH v3 16/29] dm: Avoid activating devices in 'dm uclass' command   Simon Glass
• [U-Boot] [PATCH v3 17/29] dm: Introduce device sequence numbering   Simon Glass
• [U-Boot] [PATCH v3 18/29] dm: Display the sequence number for each device   Simon Glass
• [U-Boot] [PATCH v3 19/29] dm: Allow a device to be found by its FDT offset   Simon Glass
• [U-Boot] [PATCH v3 20/29] dm: Avoid accessing uclasses before they are ready   Simon Glass
• [U-Boot] [PATCH v3 21/29] fdt: Add a function to get the node offset of an alias   Simon Glass
• [U-Boot] [PATCH v3 22/29] dm: Tidy up some header file comments   Simon Glass
• [U-Boot] [PATCH v3 23/29] dm: Provide a function to scan child FDT nodes   Simon Glass
• [U-Boot] [PATCH v3 24/29] dm: Add functions to access a device's children   Simon Glass
• [U-Boot] [PATCH v3 25/29] dm: Introduce per-child data for devices   Simon Glass
• [U-Boot] [PATCH v3 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Simon Glass
• [U-Boot] [PATCH v3 27/29] dm: Improve errors and warnings in lists_bind_fdt()   Simon Glass
• [U-Boot] [PATCH v3 28/29] dm: Add dm_scan_other() to locate board-specific devices   Simon Glass
• [U-Boot] [PATCH v3 29/29] dm: Give the demo uclass a name   Simon Glass
• [U-Boot] [PATCH v2] powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-boot   Vijay Rai
• [U-Boot] [PATCH] driver/qe: update status of QE microcode   Vijay Rai
• [U-Boot] [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Tom Rini
• [U-Boot] [PATCH] ARM: zynq: Show ECC status on the same line as DRAM size   Michal Simek
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Tom Rini
• [U-Boot] [PATCH v2] zynq: disable -Wstrict-prototypes option for ps7_init.c   Michal Simek
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
• [U-Boot] ODROID dynamic memory initialization   Przemyslaw Marczak
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   York Sun
• [U-Boot] dfu download issue with ci_udc   S Durga Prasad Paladugu
• [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4   Siarhei Siamashka
• [U-Boot] [PATCH v3 03/10] sunxi: Remove mmc DMA support   Siarhei Siamashka
• [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4   Ian Campbell
• [U-Boot] [PATCH v3 04/10] sunxi: Implement reset_cpu   Siarhei Siamashka
• [U-Boot] [PATCH v3 05/10] sunxi: Add sun4i support   Siarhei Siamashka
• [U-Boot] [PATCH v3 06/10] sunxi: Add sun5i support   Siarhei Siamashka
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Tom Rini
• [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver   Siarhei Siamashka
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v3 08/10] sunxi: Add emac glue, enable emac on the cubieboard   Siarhei Siamashka
• [U-Boot] [PATCH v3 09/10] sunxi: Add support for using MII phy-s with the GMAC nic   Siarhei Siamashka
• [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4   Ian Campbell
• [U-Boot] [PATCH v2 3/5] sunxi: Add axp209 pmic support   Siarhei Siamashka
• [U-Boot] [PATCH v2 5/5] sunxi: Fix reset hang on sun5i   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: use random parts of SID to set ethaddr   Siarhei Siamashka
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Jeroen Hofstee
• [U-Boot] [PATCH v2] Makefile: fix binary_size_check target   Jeroen Hofstee
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
• [U-Boot] dfu download issue with ci_udc   Wolfgang Denk
• [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled   York Sun
• [U-Boot] [PATCH] pxe: clear Bootfile before returning   Joe Hershberger
• [U-Boot] [PATCH] pxe: clear Bootfile before returning   Stephen Warren
• [U-Boot] [PATCH] pxe: clear Bootfile before returning   Joe Hershberger
• [U-Boot] [PATCH] board_r: Add missing return to initr_doc   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] Makefile: use $(shell ...) for determining file_size   Chris Packham
• [U-Boot] u-boot command for standalone application   swami91
• [U-Boot] [PATCH 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Sonic Zhang
• [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Siarhei Siamashka
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Chen-Yu Tsai
• [U-Boot] [PATCH v5 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v5 01/15] kconfig: import Kconfig files from Linux 3.16-rc6   Masahiro Yamada
• [U-Boot] [PATCH v5 02/15] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v5 04/15] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v5 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 07/15] Do not apply: tools: add gen_maintainers.py   Masahiro Yamada
• [U-Boot] [PATCH v5 08/15] Add MAINTAINERS files   Masahiro Yamada
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v5 10/15] kconfig: remove mkconfig and boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 13/15] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH v5 14/15] powerpc: remove redundant CPU definition   Masahiro Yamada
• [U-Boot] [PATCH v5 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] dfu download issue with ci_udc   S Durga Prasad Paladugu
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Chris Packham
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Masahiro Yamada
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Brian Norris
• [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check   Chris Packham
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: Add register infomation of i2c for rcar   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] u-boot command for standalone application   Wolfgang Denk
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Ian Campbell
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   Benoit Sansoni
• [U-Boot] dfu download issue with ci_udc   S Durga Prasad Paladugu
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Andreas Bießmann
• [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller   Ian Campbell
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Ian Campbell
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Ian Campbell
• [U-Boot] [PATCH] board_r: Add missing return to initr_doc   Ian Campbell
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Andreas Bießmann
• [U-Boot] [PATCH v2] board_r: Add missing return to initr_doc   Ian Campbell
• [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check   Wolfgang Denk
• [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Lukasz Majewski
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Ian Campbell
• [U-Boot] A way to change the status of the whole series on Patchwork ?   Ian Campbell
• [U-Boot] [PATCH] vitesse: remove duplicated argument to ||   Maxin B. John
• [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Przemyslaw Marczak
• [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Przemyslaw Marczak
• [U-Boot] [PATCH] boards.cfg : Add maintainers entries for SOCFPGA   dinguyen at altera.com
• [U-Boot] [PATCH v2 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH] emif.h: remove duplicated argument to |   Maxin B. John
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Siarhei Siamashka
• [U-Boot] u-boot command for standalone application   swami91
• [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check   Tom Rini
• [U-Boot] u-boot command for standalone application   swami91
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Tom Rini
• [U-Boot] [PATCH v1 1/2] ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD   Stefan Roese
• [U-Boot] [PATCH v3 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] u-boot command for standalone application   Wolfgang Denk
• [U-Boot] u-boot command for standalone application   Wolfgang Denk
• [U-Boot] u-boot command for standalone application   swami91
• [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] u-boot command for standalone application   Wolfgang Denk
• [U-Boot] u-boot command for standalone application   Ian Campbell
• [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support   Roman Byshko
• [U-Boot] [PATCH v3 1/5] sunxi: add defines to control USB Host clocks/resets   Roman Byshko
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Roman Byshko
• [U-Boot] [PATCH v3 3/5] sunxi: add general USB settings   Roman Byshko
• [U-Boot] [PATCH v3 4/5] sun7i: add USB EHCI settings   Roman Byshko
• [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI   Roman Byshko
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Stephen Warren
• [U-Boot] [PATCH] Makefile: use u-boot.map for binary_size_check   Chris Packham
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Siarhei Siamashka
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794   Marek Vasut
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Siarhei Siamashka
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Marek Vasut
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Siarhei Siamashka
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Siarhei Siamashka
• [U-Boot] [linux-sunxi] Re: [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Julian Calaby
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Siarhei Siamashka
• [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling   Siarhei Siamashka
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Fabio Estevam
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Otavio Salvador
• [U-Boot] [linux-sunxi] Re: [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration   Siarhei Siamashka
• [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Siarhei Siamashka
• [U-Boot] [linux-sunxi] Re: [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Julian Calaby
• [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Siarhei Siamashka
• [U-Boot] [PATCH 12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: DRA7: Enable software leveling for dra7   Lokesh Vutla
• [U-Boot] [PATCH] fsl/usb: Add USB XHCI support   Ramneek Mehresh
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode   Ian Campbell
• [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] [PATCH 04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 05/14] sunxi: dram: Code cleanup for the impedance calibration   Ian Campbell
• [U-Boot] [PATCH 06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)   Ian Campbell
• [U-Boot] [PATCH 09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'   Ian Campbell
• [U-Boot] [PATCH v2 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 1/2] ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 2/2] board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH] powerpc/T4240QDS/eth: fix for XFI   shh.xie at gmail.com
• [U-Boot] [PATCH v2 0/2] Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support   Roman B.
• [U-Boot] [PATCH] powerpc/T4240QDS/eth: fix for XFI   Shaohui Xie
• [U-Boot] [PATCH v2 0/2] OMAP/GPMC: speed up NAND read access   Gupta, Pekon
• [U-Boot] [PATCH 1/2] powerpc/t2080qds: fixup dtb for 10g-kr   shh.xie at gmail.com
• [U-Boot] [PATCH 2/2] powerpc/t2080qds: fix dtb when runnig 1000BASE-KX protocol   shh.xie at gmail.com
• [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Tom Rini
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Tom Rini
• [U-Boot] [PATCH] Makefile: use $(shell ...) for determining file_size   Simon Glass
• [U-Boot] [PATCH v2] Makefile: use $(shell ...) for determining file_size   Simon Glass
• [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Simon Glass
• [U-Boot] [PATCH v4 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Marek Vasut
• [U-Boot] [PATCH] arm: m53evk: Fix RTC bus number   Marek Vasut
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Marek Vasut
• [U-Boot] [PATCH] arm: mx5: Fix RTC bus number   Marek Vasut
• [U-Boot] [PATCH] cosmetic: boards.cfg: fix some maintainers fields   Simon Glass
• [U-Boot] [PATCH v2 2/3] MAKEALL: make sure to invoke GNU Make   Simon Glass
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support   sergey kostanbaev
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH v5 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver   Jeroen Hofstee
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   Gerald Kerma
• [U-Boot] [PATCH v6 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [U-boot] [Patch] keystone2: use EFUSE_BOOTROM information to configure PLLs   Ivan Khoronzhuk
• [U-Boot] pcm051: use ti_am335x_common.h config   Tom Rini
• [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI   Ian Campbell
• [U-Boot] [PATCH] Change Andy Fleming's email address   Andy Fleming
• [U-Boot] [PATCH] ARM: tegra: enable DFU too   Stephen Warren
• [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig   Simon Glass
• [U-Boot] [PATCH v5 04/15] kconfig: add basic Kconfig files   Simon Glass
• [U-Boot] [PATCH] net: BOOTP retry timeout improvements   Stephen Warren
• [U-Boot] [PATCH] arm: bcm281xx: Add Ethernet Clock support   Steve Rae
• [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig   Simon Glass
• [U-Boot] [PATCH v5 08/15] Add MAINTAINERS files   Simon Glass
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Simon Glass
• [U-Boot] Reading multiple bytes using I2C in U-Boot   Nildo Junior
• [U-Boot] [PATCH 0/3] ARM: DRA72x: Add CPSW Ethernet support for DRA72x SoC   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: omap: Fix GPMC init for OMAP3 platforms   Tom Rini
• [U-Boot] [U-Boot, 1/3] drivers: net: cpsw: add support for using second port as ethernet   Tom Rini
• [U-Boot] [U-Boot,2/3] ARM: DRA7xx: Add cpsw second port pinmux   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: dra7_evm: Add Ethernet support for dra72x platform   Tom Rini
• [U-Boot] [U-Boot, 1/2] power/pmic.h: Add prototype for power_init_board.   Tom Rini
• [U-Boot] [U-Boot, 2/2] tps65218/am43xx_evm: Add power framework support to TPS65218   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 1/3] mtd: nand: davinci: add opportunity to write keystone U-boot image   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/3] keystone: add support for NAND gpheader image   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/3] k2hk_evm: add script to automate NAND flash process   Tom Rini
• [U-Boot] am335x_evm / gumstix pepper: Correct DDR settings   Tom Rini
• [U-Boot] tricorder: convert to generic board   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: omap: tao3530: Convert to generic board   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 1/6] ARM: keystone2: psc: use common PSC base   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/6] keystone: ddr3: add ddr3.h to hold ddr3 API   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/6] keystone2: ddr: add DDR3 PHY configs updated for PG 2.0   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 4/6] ARM: keystone2: keystone_nav: make it dependent on keystone driver   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 5/6] keystone2: move cpu_to_bus() to keystone.c   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 6/6] keystone2: add possibility to turn off all dsps   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/6] k2hk: use common KS2_ prefix for all hardware definitions   Tom Rini
• [U-Boot] [U-Boot, U-boot, 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory   Tom Rini
• [U-Boot] [U-Boot, U-boot, 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file   Tom Rini
• [U-Boot] [U-Boot, U-boot, 5/6] configs: k2hk_evm: config: add common EVM configuration header   Tom Rini
• [U-Boot] [U-Boot, U-boot, 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/6] ARM: keystone2: add K2E SoC hardware definitions   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/6] ARM: keystone2: add K2E SoC hardware definitions   Tom Rini
• [U-Boot] [U-Boot, U-boot, 2/6] ARM: keystone2: clock: add K2E clock support   Tom Rini
• [U-Boot] [U-Boot, U-boot, 3/6] ARM: keystone2: add MSMC cache coherency support for K2E SOC   Tom Rini
• [U-Boot] [U-Boot, U-boot, 4/6] keystone2: use CONFIG_SOC_KEYSTONE in common places   Tom Rini
• [U-Boot] [U-Boot, U-boot, 5/6] ARM: keystone2: spl: add K2E SoC support   Tom Rini
• [U-Boot] [U-Boot,U-boot,6/6] board: k2e-evm: add board support   Tom Rini
• [U-Boot] ARM: OMAP: Fix handling of errata i727   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] ARM: omap: fix GPMC address-map size for NAND and NOR devices   Tom Rini
• [U-Boot] [U-Boot, v1, 2/3] ARM: omap: clean redundant PISMO_xx macros used in OMAP3   Tom Rini
• [U-Boot] [U-Boot, v1, 3/3] ARM: omap: move board specific NAND configs out from ti_armv7_common.h   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] ARM: tegra: enable DFU too   Simon Glass
• [U-Boot] [PATCH v5 10/15] kconfig: remove mkconfig and boards.cfg   Simon Glass
• [U-Boot] [PATCH v5 11/15] MAKEALL: adjust for Kconfig   Simon Glass
• [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files   Simon Glass
• [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig   Simon Glass
• [U-Boot] [PATCH v5 14/15] powerpc: remove redundant CPU definition   Simon Glass
• [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Minkyu Kang
• [U-Boot] [PATCH V3 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Minkyu Kang
• [U-Boot] [PATCH V3 1/9] exynos_fb: Remove usage of static defines   Minkyu Kang
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] [PATCH 3/6] sunxi: add Cubieboard2 support   Siarhei Siamashka
• [U-Boot] Loading nvram with U-Boot via the serial port   Alex
• [U-Boot] [PATCH v3 03/10] sunxi: Remove mmc DMA support   Hans de Goede
• [U-Boot] [PATCH v3 04/10] sunxi: Implement reset_cpu   Hans de Goede
• [U-Boot] [PATCH v3 06/10] sunxi: Add sun5i support   Hans de Goede
• [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver   Hans de Goede
• [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller   Hans de Goede
• [U-Boot] [PATCH v3 07/10] net: Rename and cleanup sunxi (Allwinner) emac driver   Stefan Roese
• [U-Boot] Removing an environment variables entries in U-Boot   Alex
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCHv2] pcm051: use ti_am335x_common.h config   Matwey V. Kornilov
• [U-Boot] [PATCH v3 01/29] dm: gpio: Don't use the driver model uclass for SPL   Simon Glass
• [U-Boot] [PATCH v3 02/29] dm: Use an explicit expect value in core tests   Simon Glass
• [U-Boot] [PATCH v3 03/29] stdio: Remove redundant code around stdio_register() calls   Simon Glass
• [U-Boot] [PATCH v3 04/29] stdio: Pass device pointer to stdio methods   Simon Glass
• [U-Boot] [PATCH v3 05/29] dm: Make sure that the root device is probed   Simon Glass
• [U-Boot] [PATCH v3 06/29] dm: Provide a way to shut down driver model   Simon Glass
• [U-Boot] [PATCH v3 07/29] sandbox: Remove all drivers before exit   Simon Glass
• [U-Boot] [PATCH v3 08/29] dm: Allow drivers to be marked 'before relocation'   Simon Glass
• [U-Boot] [PATCH v3 09/29] dm: Support driver model prior to relocation   Simon Glass
• [U-Boot] [PATCH v3 10/29] stdio: Provide functions to add/remove devices using stdio_dev   Simon Glass
• [U-Boot] [PATCH v3 11/29] console: Remove vprintf() optimisation for sandbox   Simon Glass
• [U-Boot] [PATCH v3 12/29] Add a flag indicating when the serial console is ready   Simon Glass
• [U-Boot] [PATCH v3 13/29] dm: Move uclass error checking/probing into a function   Simon Glass
• [U-Boot] [PATCH v3 14/29] fdt: Add a function to get the alias sequence of a node   Simon Glass
• [U-Boot] [PATCH v3 15/29] dm: Move device display into its own function   Simon Glass
• [U-Boot] [PATCH v3 16/29] dm: Avoid activating devices in 'dm uclass' command   Simon Glass
• [U-Boot] [PATCH v3 17/29] dm: Introduce device sequence numbering   Simon Glass
• [U-Boot] [PATCH v3 18/29] dm: Display the sequence number for each device   Simon Glass
• [U-Boot] [PATCH v3 19/29] dm: Allow a device to be found by its FDT offset   Simon Glass
• [U-Boot] [PATCH v3 20/29] dm: Avoid accessing uclasses before they are ready   Simon Glass
• [U-Boot] [PATCH v3 21/29] fdt: Add a function to get the node offset of an alias   Simon Glass
• [U-Boot] [PATCH v3 22/29] dm: Tidy up some header file comments   Simon Glass
• [U-Boot] [PATCH v3 23/29] dm: Provide a function to scan child FDT nodes   Simon Glass
• [U-Boot] [PATCH v3 24/29] dm: Add functions to access a device's children   Simon Glass
• [U-Boot] [PATCH v3 25/29] dm: Introduce per-child data for devices   Simon Glass
• [U-Boot] [PATCH v3 26/29] dm: Add child_pre_probe() and child_post_remove() methods   Simon Glass
• [U-Boot] [PATCH v3 27/29] dm: Improve errors and warnings in lists_bind_fdt()   Simon Glass
• [U-Boot] [PATCH v3 28/29] dm: Add dm_scan_other() to locate board-specific devices   Simon Glass
• [U-Boot] [PATCH v3 29/29] dm: Give the demo uclass a name   Simon Glass
• [U-Boot] [PATCH] buildman: Add -F flag to retry failed builds   Simon Glass
• [U-Boot] [PATCH 2/6] buildman: Avoid retrying a build if it definitely failed   Simon Glass
• [U-Boot] [PATCH v3 1/9] Remove form-feeds from dlmalloc.c   Simon Glass
• [U-Boot] [PATCH v3 3/9] sandbox: Set up global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH v3 4/9] Add a simple malloc() implementation for pre-relocation   Simon Glass
• [U-Boot] [PATCH v3 7/9] sandbox: Support pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 8/9] sandbox: config: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v3 9/9] sandbox: Always enable malloc debug   Simon Glass
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Simon Glass
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Hans de Goede
• [U-Boot] [PATCH v6] mx6: add support of multi-processor command   Gabriel Huau
• [U-Boot] [PATCH v1 0/4] introduce get_maintainer.pl   Daniel Schwierzeck
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15   Daniel Schwierzeck
• [U-Boot] [PATCH v1 3/4] get_maintainer.pl: adapt to U-Boot tree   Daniel Schwierzeck
• [U-Boot] [PATCH v1 4/4] get_maintainer.pl: add support for scanning multiple MAINTAINERS files   Daniel Schwierzeck
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Jeroen Hofstee
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Hans de Goede
• [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI   Hans de Goede
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH 1/1] ARM: sheevaplug: fix uboot corruption   Gerald Kerma
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Ian Campbell
• [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller   Ian Campbell
• [U-Boot] [PATCH v6 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v6 01/15] kconfig: import Kconfig files from Linux 3.16-rc6   Masahiro Yamada
• [U-Boot] [PATCH v6 02/15] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 03/15] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v6 04/15] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v6 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH v6 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 07/15] Do not apply: tools: add gen_maintainers.py   Masahiro Yamada
• [U-Boot] [PATCH v6 08/15] Add MAINTAINERS files   Masahiro Yamada
• [U-Boot] [PATCH v6 09/15] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v6 10/15] kconfig: remove mkconfig and boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v6 11/15] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 12/15] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 13/15] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH v6 14/15] powerpc: remove redundant CPU definition   Masahiro Yamada
• [U-Boot] [PATCH v6 15/15] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] [PATCH v5 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v5 12/15] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Hans de Goede
• [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller   Hans de Goede
• [U-Boot] [PATCH v6] arm: ep9315: Return back Cirrus Logic EDB9315A board support   sergey kostanbaev
• [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver   Roman Byshko
• [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Jeroen Hofstee
• [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver   Hans de Goede
• [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver   Marek Vasut
• [U-Boot] [PATCH] cubieboard2: Enable AXP209 power controller   Hans de Goede
• [U-Boot] [PATCH 1/7] sun4i: add USB EHCI settings   Hans de Goede
• [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings   Hans de Goede
• [U-Boot] [PATCH 3/7] sunxi: Enable EHCI on various sunxi boards   Hans de Goede
• [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Hans de Goede
• [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Hans de Goede
• [U-Boot] [PATCH 6/7] sun5i: Add support for a number of new sun5i boards   Hans de Goede
• [U-Boot] [PATCH 7/7] sun7i: Add support for a number of new sun7i boards   Hans de Goede
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Simon Glass
• [U-Boot] Refactoring of U-Boot directory structure   Simon Glass
• [U-Boot] Refactoring of U-Boot directory structure   Simon Glass
• [U-Boot] [PATCH v5 03/15] kconfig: add board Kconfig and defconfig files   Simon Glass
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Simon Glass
• [U-Boot] [PATCH] patman: Only apply patches when we know the original HEAD   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch patman   Simon Glass
• [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass   Simon Glass
• [U-Boot] [RFC PATCH v4 0/11] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator   Lokesh Vutla
• [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Jaehoon Chung
• [U-Boot] [PATCH] arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] serial: sh: Add support DL and CKS register for R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] serial: sh: Add support External Clock mode   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: ehci: rmobile: Remove xHCI address   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794   Marek Vasut
• [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Stefan Roese
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Michal Simek
• [U-Boot] [PATCH 1/7] sun4i: add USB EHCI settings   Ian Campbell
• [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings   Ian Campbell
• [U-Boot] [PATCH 3/7] sunxi: Enable EHCI on various sunxi boards   Ian Campbell
• [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Chen-Yu Tsai
• [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Ian Campbell
• [U-Boot] [PATCH] powerpc/85xx: enable mtdparts for nor flash   Yangbo Lu
• [U-Boot] [PATCH] arm: ep9315: Add .vectors section to lds and remove obsolete lds   Sergey Kostanbaev
• [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   thomas.langer at lantiq.com
• [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
• [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Wolfgang Denk
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Ian Campbell
• [U-Boot] [PATCH 2/7] sun5i: add USB EHCI settings   Hans de Goede
• [U-Boot] [linux-sunxi] Re: [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Hans de Goede
• [U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
• [U-Boot] [PATCH v6 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH] powerpc/85xx: enable mtdparts for nor flash   Wolfgang Denk
• [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Hans de Goede
• [U-Boot] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Ian Campbell
• [U-Boot] Please pull u-boot-sunxi.git/master   Albert ARIBAUD
• [U-Boot] [PATCH 4/7] sunxi: Add CONFIG_MACPWR option   Hans de Goede
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] usb: ehci: rmobile: Remove xHCI address   Marek Vasut
• [U-Boot] fatload from eMMC general purpose partition   Andreas Naumann
• [U-Boot] [PATCH v5 0/11] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH v5 01/11] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH v5 02/11] exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v5 03/11] exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v5 04/11] exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v5 06/11] exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v5 07/11] exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v5 08/11] exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v5 09/11] dm: gpio: Enhance gpio command to show only active GPIOs   Simon Glass
• [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v5 11/11] dm: sandbox: dts: Add a GPIO bank   Simon Glass
• [U-Boot] [PATCH v3 0/9] Add a pre-relocation malloc() implementation   Simon Glass
• [U-Boot] [PATCH v3 2/9] arm: Set up global data before board_init_f()   Simon Glass
• [U-Boot] fatload from eMMC general purpose partition   Lukasz Majewski
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] fatload from eMMC general purpose partition   Andreas Naumann
• [U-Boot] Please pull u-boot-x86.git branch patman   Tom Rini
• [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator   Tom Rini
• [U-Boot] [PATCH v6] mx6: add support of multi-processor command   Stefano Babic
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Tom Rini
• [U-Boot] Refactoring of U-Boot directory structure   Stephen Warren
• [U-Boot] [PATCH] ARM: DRA: Enable VTT regulator   Jeroen Hofstee
• [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model   Tom Rini
• [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass   Tom Rini
• [U-Boot] [PATCH v2 8/9] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH 5/9] kmp204x: CPU watchdog enabled   York Sun
• [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds   Ian Campbell
• [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds   Hans de Goede
• [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds   Jeroen Hofstee
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Tom Rini
• [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model   Tom Rini
• [U-Boot] [PATCH] SOM: tam3517: convert to generic board   Jeroen Hofstee
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Scott Wood
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Marek Vasut
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Scott Wood
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Marek Vasut
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Scott Wood
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Masahiro Yamada
• [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()   Marek Vasut
• [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 1/3] buildman: Fix a few typos   Simon Glass
• [U-Boot] [PATCH v2 2/3] buildman: Add some notes about moving from MAKEALL   Simon Glass
• [U-Boot] [PATCH v2 3/3] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH 1/2] git-mailrc: Change fdt maintainer   Simon Glass
• [U-Boot] [PATCH 2/2] git-mailrc: Add myself as dm maintainer   Simon Glass
• [U-Boot] [PATCH v2] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   Yangbo Lu
• [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds   Ian Campbell
• [U-Boot] [PATCH] sunxi: make mksunxiboot available to tools-only builds   Ian Campbell
• [U-Boot] Can not boot Linux with new FIT image on ARMv8   Duxiaoqiang
• [U-Boot] [PATCH] samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget   Lukasz Majewski
• [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime   Dmitry Lifshitz
• [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v7 01/15] kconfig: import Kconfig files from Linux 3.16-rc7   Masahiro Yamada
• [U-Boot] [PATCH v7 02/15] Do not apply: tools: add genkconfig   Masahiro Yamada
• [U-Boot] [PATCH v7 03/15] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v7 04/15] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v7 05/15] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v7 07/15] Do not apply: tools: add gen_maintainers.py   Masahiro Yamada
• [U-Boot] [PATCH v7 08/15] Add board MAINTAINERS files   Masahiro Yamada
• [U-Boot] [PATCH v7 09/15] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v7 10/15] kconfig: remove mkconfig and boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v7 11/15] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v7 12/15] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v7 13/15] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH v7 14/15] powerpc: remove redundant CPU definition   Masahiro Yamada
• [U-Boot] [PATCH v7 15/15] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] ext4load: fix help text   Pavel Machek
• [U-Boot] [PATCH] cosmetic: update doc/README.scrapyard   Masahiro Yamada
• [U-Boot] DM, Kconfig and clang changes   Masahiro Yamada
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v5 00/11] ARMv7: add PSCI support to U-Boot   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] DM, Kconfig and clang changes   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Stefano Babic
• [U-Boot] [PATCH v1 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH 0/3] test: Extending USB gadget tests infrastructure   Lukasz Majewski
• [U-Boot] [PATCH 1/3] test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files   Lukasz Majewski
• [U-Boot] [PATCH 2/3] test: dfu: cosmetic: Add missing license information to DFU test scripts   Lukasz Majewski
• [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation   Lukasz Majewski
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] scripts: add scripts/show-gnu-make to get GNU Make command name   Tom Rini
• [U-Boot] [U-Boot,v2,2/3] MAKEALL: make sure to invoke GNU Make   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] buildman: make sure to invoke GNU Make   Tom Rini
• [U-Boot] cosmetic: boards.cfg: fix some maintainers fields   Tom Rini
• [U-Boot] boards.cfg : Add maintainers entries for SOCFPGA   Tom Rini
• [U-Boot] [PATCH] boards:trats2: New Trats2 board maintainer   Lukasz Majewski
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   drEagle
• [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation   Stephen Warren
• [U-Boot] [PATCH] sun7i: Add bananapi board   Hans de Goede
• [U-Boot] [PATCH] sun7i: Add bananapi board   Ian Campbell
• [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime   Jeroen Hofstee
• [U-Boot] [PATCH v5 0/11] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH v5 01/11] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH v5 02/11] exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v5 03/11] exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v5 04/11] exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v5 06/11] exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v5 07/11] exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v5 08/11] exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v5 09/11] dm: gpio: Enhance gpio command to show only active GPIOs   Simon Glass
• [U-Boot] [PATCH v5 10/11] exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v5 11/11] dm: sandbox: dts: Add a GPIO bank   Simon Glass
• [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot   Tom Rini
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   Stefan Roese
• [U-Boot] [PATCH v7 1/1] ARM: kirkwood: add mvsdio driver   Pantelis Antoniou
• [U-Boot] [PATCH] sun7i: Add bananapi board   Hannes Petermaier
• [U-Boot] [PATCH] sun7i: Add bananapi board   Ian Campbell
• [U-Boot] [PATCH] sun7i: Add bananapi board   Hannes Petermaier
• [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards   York Sun
• [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig   Jeroen Hofstee
• [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig   Jeroen Hofstee
• [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards   York Sun
• [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Luka Perkov
• [U-Boot] [PATCH 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Scott Wood
• [U-Boot] DM, Kconfig and clang changes   Masahiro Yamada
• [U-Boot] [PATCH v5 09/15] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v7 06/15] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards   Wolfgang Denk
• [U-Boot] [PATCH v8 0/13] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v8 01/13] kconfig: import Kconfig files from Linux 3.16-rc7   Masahiro Yamada
• [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
• [U-Boot] [PATCH v8 03/13] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v8 04/13] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v8 06/13] Add board MAINTAINERS files   Masahiro Yamada
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] [PATCH v8 08/13] kconfig: remove mkconfig and boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v8 09/13] MAKEALL: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v8 10/13] buildman: adjust for Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v8 11/13] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
• [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition   Masahiro Yamada
• [U-Boot] [PATCH v8 13/13] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
• [U-Boot] [PATCH v7 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition   Stefan Roese
• [U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] [PATCH 1/1] env_mmc: support env partition setup in runtime   Igor Grinberg
• [U-Boot] [PATCH v2 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Sonic Zhang
• [U-Boot] [PATCH v2 2/2] support blackfin board initialization in generic board_f   Sonic Zhang
• [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version   Masahiro Yamada
• [U-Boot] SPL and an LCD splash screen on AM335x   Andy Pont
• [U-Boot] SPL and an LCD splash screen on AM335x   Heshsham Abdul Basit
• [U-Boot] [PATCH] [blackfin] bf609: add register define required by core B on dual core BF609 processor   Aaron Wu
• [U-Boot] [PATCH] test email   Przemyslaw Marczak
• [U-Boot] [PATCH] [blackfin] bf609: add register define required by core B on dual core BF609 processor   Sonic Zhang
• [U-Boot] [PATCH] test email   Przemyslaw Marczak
• [U-Boot] SPL and an LCD splash screen on AM335x   Stefano Babic
• [U-Boot] Implementing spl_start_uboot() for directly booting linux   Heshsham Abdul Basit
• [U-Boot] Implementing spl_start_uboot() for directly booting linux   Stefano Babic
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version   Masahiro Yamada
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] [PATCH v1 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Stefan Roese
• [U-Boot] [PATCH v2 1/4] MAINTAINERS: add initial version   Daniel Schwierzeck
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Simon Glass
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay Kumar
• [U-Boot] [PATCH V4 1/9] exynos_fb: Remove usage of static defines   Ajay Kumar
• [U-Boot] [PATCH V4 2/9] arm: exynos: Add RPLL for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH V4 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH V4 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay Kumar
• [U-Boot] [PATCH V4 5/9] video: Add driver for Parade PS8625 dP to LVDS bridge   Ajay Kumar
• [U-Boot] [PATCH V4 6/9] ARM: exynos: Add missing declaration for gpio_direction_input   Ajay Kumar
• [U-Boot] [PATCH V4 7/9] exynos5420: add callbacks needed for exynos_fb driver   Ajay Kumar
• [U-Boot] [PATCH V4 8/9] ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge chip   Ajay Kumar
• [U-Boot] [PATCH V4 9/9] CONFIGS: peach-pit: Enable display for peach_pit board   Ajay Kumar
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Masahiro Yamada
• [U-Boot] Implementing spl_start_uboot() for directly booting linux   Heshsham Abdul Basit
• [U-Boot] [PATCH v4 0/15] Kconfig for U-Boot   Simon Glass
• [U-Boot] [PATCH v3 0/16] Introduce driver model serial uclass   Simon Glass
• [U-Boot] [PATCH v3 01/16] serial: Set up the 'priv' pointer when creating a serial device   Simon Glass
• [U-Boot] [PATCH v3 02/16] dm: Adjust lists_bind_fdt() to return the bound device   Simon Glass
• [U-Boot] [PATCH v3 03/16] dm: Add a uclass for serial devices   Simon Glass
• [U-Boot] [PATCH v3 04/16] Set up stdio earlier when using driver model   Simon Glass
• [U-Boot] [PATCH v3 05/16] sandbox: Convert serial driver to use driver model   Simon Glass
• [U-Boot] [PATCH v3 06/16] sandbox: serial: Support a coloured console   Simon Glass
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [PATCH v3 08/16] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
• [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v3 10/16] dm: Make driver model available before board_init()   Simon Glass
• [U-Boot] [PATCH v3 11/16] dm: serial: Move baud rate calculation to ns16550.c   Simon Glass
• [U-Boot] [PATCH v3 12/16] dm: serial: Collect common baud rate code in ns16550   Simon Glass
• [U-Boot] [PATCH v3 13/16] dm: serial: Add driver model support for ns16550   Simon Glass
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Simon Glass
• [U-Boot] [PATCH v3 15/16] RFC: dm: tegra: Enable driver model for serial   Simon Glass
• [U-Boot] [PATCH v3 16/16] dm: tegra: Use V_NS16550_CLK only in SPL builds   Simon Glass
• [U-Boot] [PATCH 1/2] fdt: Rename fdt_resize() to fdt_shrink_to_minimum()   Simon Glass
• [U-Boot] [PATCH 2/2] fdt: Sync up with libfdt   Simon Glass
• [U-Boot] Please fix warning of Exynos   Masahiro Yamada
• [U-Boot] Please fix warning of gw_ventana board   Masahiro Yamada
• [U-Boot] [PATCH] omap: clean-up dead configs   Masahiro Yamada
• [U-Boot] [PATCH 1/2] env_mmc: add mmc_get_env_addr() prototype   Dmitry Lifshitz
• [U-Boot] [PATCH v2 2/2] env_mmc: support env partition setup in runtime   Dmitry Lifshitz
• [U-Boot] [PATCH] drivers: rtc: remove dead drivers   Masahiro Yamada
• [U-Boot] [PATCH] drivers: net: remove dead drivers   Masahiro Yamada
• [U-Boot] [PATCH v7 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
• [U-Boot] [PATCH v7 01/12] samsung: misc: fix soc revision setting in the set_board_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v7 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Przemyslaw Marczak
• [U-Boot] [PATCH v7 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
• [U-Boot] Please fix warning of Exynos   Jaehoon Chung
• [U-Boot] [PATCH v7 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
• [U-Boot] [PATCH v7 05/12] samsung: misc: add function for setting $dfu_alt_info   Przemyslaw Marczak
• [U-Boot] [PATCH v7 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()   Przemyslaw Marczak
• [U-Boot] [PATCH v7 07/12] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
• [U-Boot] [PATCH v7 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
• [U-Boot] [PATCH v7 09/12] samsung: misc: use board specific functions to set env board info   Przemyslaw Marczak
• [U-Boot] [PATCH v7 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH v7 11/12] odroid: add odroid U3/X2 device tree description   Przemyslaw Marczak
• [U-Boot] [PATCH v7 12/12] odroid: add odroid_config   Przemyslaw Marczak
• [U-Boot] [U-boot] Origen board boot failed with 2014.07 source code   TigerLiu at via-alliance.com
• [U-Boot] [PATCH 3/3] test: ums: Add script for testing UMS gadget operation   Lukasz Majewski
• [U-Boot] [PATCH v1 2/4] get_maintainer.pl: import script from linux 3.15   Simon Glass
• [U-Boot] [PATCH v1 3/4] get_maintainer.pl: adapt to U-Boot tree   Simon Glass
• [U-Boot] Can not boot Linux with new FIT image on ARMv8   Simon Glass
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Tom Rini
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Tom Rini
• [U-Boot] [PATCH] test mail   Masahiro Yamada
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Simon Glass
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Tom Rini
• [U-Boot] Driver Model and DTS Parsing   Simon Glass
• [U-Boot] [PATCH v5 05/11] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Simon Glass
• [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model   Tom Rini
• [U-Boot] [PATCH v3 09/16] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Stephen Warren
• [U-Boot] clang sandbox warning   Simon Glass
• [U-Boot] [PATCH] rsa: Fix two errors in the implementation   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Simon Glass
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Tom Rini
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Masahiro YAMADA
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Tom Rini
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Tom Rini
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Masahiro YAMADA
• [U-Boot] [PATCH] tools/genboardscfg.py: Don't rely on subprocess.check_output   Masahiro YAMADA
• [U-Boot] [PATCH v8 01/13] kconfig: import Kconfig files from Linux 3.16-rc7   Tom Rini
• [U-Boot] [PATCH v8 02/13] kconfig: add board Kconfig and defconfig files   Tom Rini
• [U-Boot] [PATCH v8 03/13] kconfig: add basic Kconfig files   Tom Rini
• [U-Boot] [PATCH v8 04/13] include: define CONFIG_SPL and CONFIG_TPL as 1   Tom Rini
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Tom Rini
• [U-Boot] [PATCH v8 06/13] Add board MAINTAINERS files   Tom Rini
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Tom Rini
• [U-Boot] [PATCH v8 08/13] kconfig: remove mkconfig and boards.cfg   Tom Rini
• [U-Boot] [PATCH v8 09/13] MAKEALL: adjust for Kconfig   Tom Rini
• [U-Boot] [PATCH v8 10/13] buildman: adjust for Kconfig   Tom Rini
• [U-Boot] [PATCH v8 11/13] kconfig: delete redundant CONFIG_${ARCH} definition   Tom Rini
• [U-Boot] [PATCH v8 12/13] powerpc: remove redundant CPU definition   Tom Rini
• [U-Boot] [PATCH v8 13/13] include: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Tom Rini
• [U-Boot] [PATCH v8 0/13] Kconfig for U-Boot   Tom Rini
• [U-Boot] [PATCH v2 0/8] add clang support for some ARM boards   Jeroen Hofstee
• [U-Boot] [PATCH v2 1/8] board_r: ARM[64] do not set gd again   Jeroen Hofstee
• [U-Boot] [PATCH v2 2/8] ARM: SPL: do not set gd again   Jeroen Hofstee
• [U-Boot] [PATCH v2 3/8] cc-option: also detect unsupported warnings options   Jeroen Hofstee
• [U-Boot] [PATCH v2 4/8] ARM: make gd a function for clang   Jeroen Hofstee
• [U-Boot] [PATCH v2 5/8] eabi_compat: add __aeabi_memcpy __aeabi_memset   Jeroen Hofstee
• [U-Boot] [PATCH v2 6/8] clang: workaround for generated constants   Jeroen Hofstee
• [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Jeroen Hofstee
• [U-Boot] [PATCH v2 8/8] README.clang: build command with clang   Jeroen Hofstee
• [U-Boot] Driver Model and DTS Parsing   Stephen Warren
• [U-Boot] [PATCH] rsa: Fix two errors in the implementation   Jeroen Hofstee
• [U-Boot] [PATCH] rsa: Fix two errors in the implementation   Jeroen Hofstee
• [U-Boot] [RFC] Makefile: Add a message warning size change for mpc85xx boards   York Sun
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: tegra: use new generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: rpi_b: use new generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz   Bryan Wu
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Stephen Warren
• [U-Boot] [PATCH v2 0/4] Introducing the Broadcom Cygnus and NSP boards.   Steve Rae
• [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC   Marek Vasut
• [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions   Marek Vasut
• [U-Boot] [PATCH v3 2/4] usb/gadget: fastboot: add eMMC support for flash command   Marek Vasut
• [U-Boot] [PATCH v3 3/4] usb/gadget: fastboot: add support for flash command   Marek Vasut
• [U-Boot] [PATCH v3 4/4] usb/gadget: fastboot: minor cleanup   Marek Vasut
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Marek Vasut
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Stephen Warren
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Masahiro Yamada
• [U-Boot] Please pick up the maintainership on orphan boards   Masahiro Yamada
• [U-Boot] Please pull u-boot-sunxi.git/master   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] omap5912osk: change the status to Orphan   Masahiro Yamada
• [U-Boot] Quick guide to Kconfig   Frank Ihle
• [U-Boot] [PATCH] ARM: DRA7: Enable software leveling for dra7   Lokesh Vutla
• [U-Boot] Quick guide to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/3] MMC: atmel: enable the features supported by MCI   Bo Shen
• [U-Boot] [PATCH 1/3] MMC: atmel_mci: refactor setting the mode register   Bo Shen
• [U-Boot] [PATCH 2/3] MMC: atmel_mci: add configuration register definition   Bo Shen
• [U-Boot] [PATCH 3/3] MMC: atmel_mci: enable high speed mode support   Bo Shen
• [U-Boot] Quick guide to Kconfig   Frank Ihle
• [U-Boot] Please pull u-boot-sunxi.git/master   Ian Campbell
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi.git/master   Masahiro Yamada
• [U-Boot] Can not boot Linux with new FIT image on ARMv8   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Simon Glass
• [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Masahiro Yamada
• [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin   TigerLiu at via-alliance.com
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Ian Campbell
• [U-Boot] [PATCH 0/3] cm-t54: misc board fixes, convert to generic board   Dmitry Lifshitz
• [U-Boot] [PATCH 1/3] cm-t54: fix EEPROM read return value check   Dmitry Lifshitz
• [U-Boot] [PATCH 2/3] cm-t54: fix eMMC boot mode check   Dmitry Lifshitz
• [U-Boot] [PATCH 3/3] cm-t54: convert to generic board   Dmitry Lifshitz
• [U-Boot] [PATCH v8 07/13] tools: add genboardscfg.py   Tom Rini
• [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin   Jon Loeliger
• [U-Boot] [U-boot] the first 0x20 bytes in u-boot.bin   Christian Riesch
• [U-Boot] Setting Uboot environment variables from within Linux   Rossco
• [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi.git/master   Hans de Goede
• [U-Boot] Quick guide to Kconfig   Hans de Goede
• [U-Boot] Quick guide to Kconfig   Ian Campbell
• [U-Boot] [PATCH 1/3] config: introduce a generic $bootcmd   Stephen Warren
• [U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC   Steve Rae
• [U-Boot] [PATCH v3 1/4] usb/gadget: fastboot: add sparse image definitions   Steve Rae
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stefan Agner
• [U-Boot] Driver Model and DTS Parsing   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Stephen Warren
• [U-Boot] [PATCH] drivers: net: remove dead drivers   Joe Hershberger
• [U-Boot] [PATCH] lib: lmb: fix overflow in __lmb_alloc_base w/ large RAM   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC rather than ODMDATA   Stephen Warren
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Tom Rini
• [U-Boot] [PATCH] omap5912osk: change the status to Orphan   Tom Rini
• [U-Boot] [PATCH 1/4] Add option -r to env import to allow import of text files with CRLF as line endings   Stephen Warren
• [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c   Jeroen Hofstee
• [U-Boot] [PATCH v3 14/16] tegra: dts: Add serial port details   Stephen Warren
• [U-Boot] [PATCH v3 15/16] RFC: dm: tegra: Enable driver model for serial   Stephen Warren
• [U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node   Stephen Warren
• [U-Boot] [PATCH v3 16/16] dm: tegra: Use V_NS16550_CLK only in SPL builds   Stephen Warren
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Tom Rini
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Stephen Warren
• [U-Boot] [PATCH v8 05/13] kconfig: switch to Kconfig   Jeroen Hofstee
• [U-Boot] [PATCH] pxe: detect image format before calling bootm/bootz   Bryan Wu
• [U-Boot] [PATCH] kconfig: Fix compiler warning in menu.c   Hans de Goede
• [U-Boot] [PATCH] ARM: tegra: add Colibri T30 board support   Simon Glass
• [U-Boot] Driver Model and DTS Parsing   Simon Glass