[U-Boot] [PATCH] kirkwood: define empty CONFIG_MVGBE_PORTS by default

[Tom Rini]

On Fri, Jul 04, 2014 at 06:07:09AM -0700, Prafulla Wadaskar wrote:
> 
> 
> > -----Original Message-----
> > From: Luka Perkov [mailto:luka at openwrt.org]
> > Sent: 02 July 2014 05:48
> > To: u-boot at lists.denx.de
> > Cc: luka at openwrt.org; Prafulla Wadaskar; Stefan Roese
> > Subject: [PATCH] kirkwood: define empty
> > CONFIG_MVGBE_PORTS by default
> > 
> > Each board with defines it's own set of values. If we
> > do not define
> > CONFIG_MVGBE_PORTS we will hit following error:
> > 
> > mvgbe.c: In function 'mvgbe_initialize':
> > mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared
> > (first use in this function)
> >   u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;
> > 
> > This patch fixes above described problem.
> > 
> > Signed-off-by: Luka Perkov <luka at openwrt.org>
> > CC: Prafulla Wadaskar <prafulla at marvell.com>
> > CC: Stefan Roese <sr at denx.de>
> > ---
> >  drivers/net/mvgbe.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
> > index 0cd06b6..d558f59 100644
> > --- a/drivers/net/mvgbe.c
> > +++ b/drivers/net/mvgbe.c
> > @@ -35,6 +35,10 @@
> > 
> >  DECLARE_GLOBAL_DATA_PTR;
> > 
> > +#ifndef CONFIG_MVGBE_PORTS
> > +# define CONFIG_MVGBE_PORTS {0, 0}
> > +#endif
> > +
> >  #define MV_PHY_ADR_REQUEST 0xee
> >  #define MVGBE_SMI_REG (((struct mvgbe_registers
> > *)MVGBE0_BASE)->smi)
> >
> 
> This is generic to network driver, to be picked up by net custodian..
> 
> +Joe
> 
> Acked-by: Prafulla Wadaskar <prafulla at marvell.com>
> 

It's in the marvell driver so please just pick it up, thanks.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140714/c8fe8ee0/attachment.pgp>