[U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC

[Steve Rae]

On 14-07-30 06:23 PM, Marek Vasut wrote:
> On Thursday, July 31, 2014 at 03:02:37 AM, Steve Rae wrote:
>> On 14-06-26 01:13 PM, Steve Rae wrote:
>>> This series implements the "fastboot flash" command for eMMC devices.
>>> It supports both raw and sparse images.
>>>
>>> NOTES:
>>> - the support for the "fastboot flash" command is enabled with
>>> CONFIG_FASTBOOT_FLASH - the support for eMMC is enabled with
>>> CONFIG_FASTBOOT_FLASH_MMC_DEV - (future) the support for NAND would be
>>> enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
>>>
>>> This has been tested on ARMv7.
>>>
>>> Changes in v3:
>>> - remove most references to 'mmc',
>>>
>>>     which leaves only one mmc specific function: mmc_get_dev()
>>>
>>> Changes in v2:
>>> - split large function into three
>>> - improved handling of response messages
>>> - additional partition size checking when writing sparse image
>>> - update README.android-fastboot file
>>> - new in v2
>>>
>>> Steve Rae (4):
>>>     usb/gadget: fastboot: add sparse image definitions
>>>     usb/gadget: fastboot: add eMMC support for flash command
>>>     usb/gadget: fastboot: add support for flash command
>>>     usb/gadget: fastboot: minor cleanup
>>>
>>>    README                          |  10 +++
>>>    common/Makefile                 |   5 ++
>>>    common/fb_mmc.c                 | 190
>>>    ++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot
>>>      |   5 +-
>>>    drivers/usb/gadget/f_fastboot.c |  41 ++++++++-
>>>    include/fb_mmc.h                |   8 ++
>>>    include/sparse_format.h         |  58 ++++++++++++
>>>    7 files changed, 312 insertions(+), 5 deletions(-)
>>>    create mode 100644 common/fb_mmc.c
>>>    create mode 100644 include/fb_mmc.h
>>>    create mode 100644 include/sparse_format.h
>>
>> Marek,
>> I notice that this patchset is assigned to you:
>>       http://patchwork.ozlabs.org/patch/364705/
>> Has there been any progress?
>
> Hm, dang. I merrily ignored this patchset in the hope Lukasz will pick it up,
> but he was not in the loop. Sorry about delaying this so much. Given Lukasz is
> now on a vacation, I'll take a look later today.
>
>> Thanks, Steve
>
> Best regards,
> Marek Vasut
>
Thanks -- appreciate that....
And I'll work through your reviews; but I'll comment on one right now.....