[U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC
Marek Vasut
marex at denx.de
Thu Jul 31 03:23:22 CEST 2014
On Thursday, July 31, 2014 at 03:02:37 AM, Steve Rae wrote:
> On 14-06-26 01:13 PM, Steve Rae wrote:
> > This series implements the "fastboot flash" command for eMMC devices.
> > It supports both raw and sparse images.
> >
> > NOTES:
> > - the support for the "fastboot flash" command is enabled with
> > CONFIG_FASTBOOT_FLASH - the support for eMMC is enabled with
> > CONFIG_FASTBOOT_FLASH_MMC_DEV - (future) the support for NAND would be
> > enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
> >
> > This has been tested on ARMv7.
> >
> > Changes in v3:
> > - remove most references to 'mmc',
> >
> > which leaves only one mmc specific function: mmc_get_dev()
> >
> > Changes in v2:
> > - split large function into three
> > - improved handling of response messages
> > - additional partition size checking when writing sparse image
> > - update README.android-fastboot file
> > - new in v2
> >
> > Steve Rae (4):
> > usb/gadget: fastboot: add sparse image definitions
> > usb/gadget: fastboot: add eMMC support for flash command
> > usb/gadget: fastboot: add support for flash command
> > usb/gadget: fastboot: minor cleanup
> >
> > README | 10 +++
> > common/Makefile | 5 ++
> > common/fb_mmc.c | 190
> > ++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot
> > | 5 +-
> > drivers/usb/gadget/f_fastboot.c | 41 ++++++++-
> > include/fb_mmc.h | 8 ++
> > include/sparse_format.h | 58 ++++++++++++
> > 7 files changed, 312 insertions(+), 5 deletions(-)
> > create mode 100644 common/fb_mmc.c
> > create mode 100644 include/fb_mmc.h
> > create mode 100644 include/sparse_format.h
>
> Marek,
> I notice that this patchset is assigned to you:
> http://patchwork.ozlabs.org/patch/364705/
> Has there been any progress?
Hm, dang. I merrily ignored this patchset in the hope Lukasz will pick it up,
but he was not in the loop. Sorry about delaying this so much. Given Lukasz is
now on a vacation, I'll take a look later today.
> Thanks, Steve
Best regards,
Marek Vasut
More information about the U-Boot
mailing list