[U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC

[Steve Rae]

On 14-06-26 01:13 PM, Steve Rae wrote:
> This series implements the "fastboot flash" command for eMMC devices.
> It supports both raw and sparse images.
>
> NOTES:
> - the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
> - the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
> - (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
>
> This has been tested on ARMv7.
>
> Changes in v3:
> - remove most references to 'mmc',
>    which leaves only one mmc specific function: mmc_get_dev()
>
> Changes in v2:
> - split large function into three
> - improved handling of response messages
> - additional partition size checking when writing sparse image
> - update README.android-fastboot file
> - new in v2
>
> Steve Rae (4):
>    usb/gadget: fastboot: add sparse image definitions
>    usb/gadget: fastboot: add eMMC support for flash command
>    usb/gadget: fastboot: add support for flash command
>    usb/gadget: fastboot: minor cleanup
>
>   README                          |  10 +++
>   common/Makefile                 |   5 ++
>   common/fb_mmc.c                 | 190 ++++++++++++++++++++++++++++++++++++++++
>   doc/README.android-fastboot     |   5 +-
>   drivers/usb/gadget/f_fastboot.c |  41 ++++++++-
>   include/fb_mmc.h                |   8 ++
>   include/sparse_format.h         |  58 ++++++++++++
>   7 files changed, 312 insertions(+), 5 deletions(-)
>   create mode 100644 common/fb_mmc.c
>   create mode 100644 include/fb_mmc.h
>   create mode 100644 include/sparse_format.h
>

Marek,
I notice that this patchset is assigned to you:
     http://patchwork.ozlabs.org/patch/364705/
Has there been any progress?
Thanks, Steve