[U-Boot] [PATCH v6 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup

Przemyslaw Marczak p.marczak at samsung.com
Mon Jul 28 10:26:50 CEST 2014


Hello Jaehoon,

On 07/28/2014 07:10 AM, Jaehoon Chung wrote:
> Hi, Przemyslaw.
>
> On 07/19/2014 12:29 AM, Przemyslaw Marczak wrote:
>> This patch introduces code clean-up for exynos boot mode check.
>> It includes:
>> - removal of typedef: boot_mode
>> - move the boot mode enum to arch-exynos/power.h
>> - add bootmode for sequence: eMMC 4.4 ch4 / SD ch2
>> - add new function: get_boot_mode() for OM[5:1] pin check
>> - update spl boot code
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>>
>> Changes v5:
>> - exynos: boot mode: add missing bootmode (1st:EMMC 4.4 / 2nd:SD ch2)
>> ---
>>   arch/arm/cpu/armv7/exynos/power.c        |  7 +++++++
>>   arch/arm/cpu/armv7/exynos/spl_boot.c     |  5 ++---
>>   arch/arm/include/asm/arch-exynos/power.h | 21 +++++++++++++++++++++
>>   arch/arm/include/asm/arch-exynos/spl.h   | 17 ++---------------
>>   4 files changed, 32 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
>> index 638ee0b..e1ab3d6 100644
>> --- a/arch/arm/cpu/armv7/exynos/power.c
>> +++ b/arch/arm/cpu/armv7/exynos/power.c
>> @@ -202,3 +202,10 @@ void power_exit_wakeup(void)
>>   	else
>>   		exynos4_power_exit_wakeup();
>>   }
>> +
>> +unsigned int get_boot_mode(void)
>> +{
>> +	unsigned int om_pin = samsung_get_base_power();
>> +
>> +	return readl(om_pin) & OM_PIN_MASK;
>> +}
>> diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
>> index 7916630..87f9214 100644
>> --- a/arch/arm/cpu/armv7/exynos/spl_boot.c
>> +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
>> @@ -20,7 +20,6 @@
>>   #include "clock_init.h"
>>
>>   DECLARE_GLOBAL_DATA_PTR;
>> -#define OM_STAT         (0x1f << 1)
>>
>>   /* Index into irom ptr table */
>>   enum index {
>> @@ -184,7 +183,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)
>>   */
>>   void copy_uboot_to_ram(void)
>>   {
>> -	enum boot_mode bootmode = BOOT_MODE_OM;
>> +	u32 bootmode = BOOT_MODE_OM;
>
> Need to use "u32"?
>
Ok, will change to "unsigned int".
>>
>>   	u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
>>   	u32 offset = 0, size = 0;
>> @@ -207,7 +206,7 @@ void copy_uboot_to_ram(void)
>>   #endif
>>
>>   	if (bootmode == BOOT_MODE_OM)
>> -		bootmode = readl(samsung_get_base_power()) & OM_STAT;
>> +		bootmode = get_boot_mode();
>>
>>   	switch (bootmode) {
>>   #ifdef CONFIG_SPI_BOOTING
>> diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
>> index 4f2447b..1c0f144 100644
>> --- a/arch/arm/include/asm/arch-exynos/power.h
>> +++ b/arch/arm/include/asm/arch-exynos/power.h
>> @@ -1670,6 +1670,27 @@ struct exynos5420_power {
>>   };
>>   #endif	/* __ASSEMBLY__ */
>>
>> +#define OM_PIN_BITS	0x1f
>> +#define OM_PIN_SHIFT	0x1
>> +#define OM_PIN_MASK	(OM_PIN_BITS << OM_PIN_SHIFT)
>> +
>> +enum {
>> +	/*
>> +	 * Assign the OM pin values for respective boot modes.
>> +	 * Exynos4 does not support spi boot and the mmc boot OM
>> +	 * pin values are the same across Exynos4 and Exynos5.
>> +	 */
>> +	BOOT_MODE_MMC = 4,      /* SD_CH2  | USB */
>
> I think good that use "BOOT_MODE_SD" instead of "BOOT_MODE_MMC".
>
> Best Regards,
> Jaehoon Chung
>
Ok, I can change this.

>> +	BOOT_MODE_EMMC = 8,     /* EMMC4.4 | USB */
>> +	BOOT_MODE_EMMC_SD = 40, /* EMMC4.4 | SD_CH2 */
>> +	BOOT_MODE_SERIAL = 20,
>> +	/* Boot based on Operating Mode pin settings */
>> +	BOOT_MODE_OM = 32,
>> +	BOOT_MODE_USB,	/* Boot using USB download */
>> +};
>> +
>> +unsigned int get_boot_mode(void);
>> +
>>   void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
>>
>>   #define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
>> diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h
>> index b1d68c3..cdcb2bc 100644
>> --- a/arch/arm/include/asm/arch-exynos/spl.h
>> +++ b/arch/arm/include/asm/arch-exynos/spl.h
>> @@ -8,20 +8,7 @@
>>   #define __ASM_ARCH_EXYNOS_SPL_H__
>>
>>   #include <asm/arch-exynos/dmc.h>
>> -
>> -enum boot_mode {
>> -	/*
>> -	 * Assign the OM pin values for respective boot modes.
>> -	 * Exynos4 does not support spi boot and the mmc boot OM
>> -	 * pin values are the same across Exynos4 and Exynos5.
>> -	 */
>> -	BOOT_MODE_MMC = 4,
>> -	BOOT_MODE_EMMC = 8,     /* EMMC4.4 */
>> -	BOOT_MODE_SERIAL = 20,
>> -	/* Boot based on Operating Mode pin settings */
>> -	BOOT_MODE_OM = 32,
>> -	BOOT_MODE_USB,	/* Boot using USB download */
>> -};
>> +#include <asm/arch/power.h>
>>
>>   #ifndef __ASSEMBLY__
>>   /* Parameters of early board initialization in SPL */
>> @@ -62,7 +49,7 @@ struct spl_machine_param {
>>   	 * table only for mmc boot.
>>   	 */
>>   	u32		uboot_size;
>> -	enum boot_mode	boot_source;	/* Boot device */
>> +	unsigned	boot_source;	/* Boot device */
>>   	unsigned	frequency_mhz;	/* Frequency of memory in MHz */
>>   	unsigned	arm_freq_mhz;	/* ARM Frequency in MHz */
>>   	u32		serial_base;	/* Serial base address */
>>
>
>

Thanks,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com


More information about the U-Boot mailing list