[U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too

[Ian Campbell]

On Fri, 2014-07-04 at 16:59 +0200, Marek Vasut wrote:
> On Saturday, May 31, 2014 at 06:36:12 PM, Ian Campbell wrote:
> > This has been disabled for ARM in initr_scsi since that function was
> > introduced. However it works fine for me on Cubieboard and Cubietruck (with
> > the upcoming AHCI glue patch).
> 
> Does this break bisectability ?

Not if this patch goes in first.

> > I also tested on two random ARM platforms which seem to define
> > CONFIG_CMD_SCSI: - highbank worked fine (on midway hardware)
> >  - omap5_uevm built OK and I confirmed using objdump that things were as
> >    expected (i.e. the default weak scsi_init nop was used).
> > 
> > While there remove the mismatched comment from the #endif (omitting the
> > comment seems to be the prevailing style in this file) and add a missing
> > return to initr_doc which I happened to spot while editing.
> > 
> > Signed-off-by: Ian Campbell <ijc at hellion.org.uk>
> > Cc: Simon Glass <sjg at chromium.org>
> 
> Make sure to check no ARM boards call scsi_init() from their board files.

I grepped around and couldn't find any.