[U-Boot] [PATCH 06/25] dm: spi: Add a uclass for SPI
Simon Glass
sjg at chromium.org
Tue Jul 15 02:56:13 CEST 2014
Add a uclass which provides access to SPI buses and includes operations
required by SPI.
For a time driver model will need to co-exist with the legacy SPI interface
so some parts of the header file are changed depending on which is in use.
The exports are adjusted also since some functions are not available with
driver model.
Boards must define CONFIG_DM_SPI to use driver model for SPI.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
common/exports.c | 4 +-
drivers/spi/Makefile | 4 +
drivers/spi/spi-uclass.c | 253 +++++++++++++++++++++++++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/spi.h | 140 ++++++++++++++++++++++++++
5 files changed, 401 insertions(+), 1 deletion(-)
create mode 100644 drivers/spi/spi-uclass.c
diff --git a/common/exports.c b/common/exports.c
index b97ca48..88fcfc8 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -27,10 +27,12 @@ unsigned long get_version(void)
# define i2c_write dummy
# define i2c_read dummy
#endif
-#ifndef CONFIG_CMD_SPI
+#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI)
# define spi_init dummy
# define spi_setup_slave dummy
# define spi_free_slave dummy
+#endif
+#ifndef CONFIG_CMD_SPI
# define spi_claim_bus dummy
# define spi_release_bus dummy
# define spi_xfer dummy
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f02c35a..d1f1dd0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -6,7 +6,11 @@
#
# There are many options which enable SPI, so make this library available
+ifdef CONFIG_DM_SPI
+obj-y += spi-uclass.o
+else
obj-y += spi.o
+endif
obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o
obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
new file mode 100644
index 0000000..4057bce
--- /dev/null
+++ b/drivers/spi/spi-uclass.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <spi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <dm/root.h>
+#include <dm/lists.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int spi_set_speed_mode(struct udevice *bus, int speed, int mode)
+{
+ struct dm_spi_ops *ops;
+ int ret;
+
+ ops = spi_get_ops(bus);
+ if (ops->set_speed)
+ ret = (*ops->set_speed)(bus, speed);
+ else
+ ret = -EINVAL;
+ if (ret) {
+ printf("Cannot set speed (err=%d)\n", ret);
+ return ret;
+ }
+
+ ops = spi_get_ops(bus);
+ if (ops->set_mode)
+ ret = (*ops->set_mode)(bus, mode);
+ else
+ ret = -EINVAL;
+ if (ret) {
+ printf("Cannot set mode (err=%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct udevice *dev = slave->dev;
+ struct udevice *bus = dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+ struct dm_spi_bus *spi = bus->uclass_priv;
+ int speed;
+ int ret;
+
+ speed = slave->max_hz;
+ if (spi->max_hz) {
+ if (speed)
+ speed = min(speed, spi->max_hz);
+ else
+ speed = spi->max_hz;
+ }
+ if (!speed)
+ speed = 100000;
+ ret = spi_set_speed_mode(bus, speed, slave->mode);
+ if (ret)
+ return ret;
+
+ return ops->claim_bus ? ops->claim_bus(bus) : 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct udevice *dev = slave->dev;
+ struct udevice *bus = dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ if (ops->release_bus)
+ spi_get_ops(bus)->release_bus(bus);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *dev = slave->dev;
+ struct udevice *bus = dev->parent;
+
+ if (bus->uclass->uc_drv->id != UCLASS_SPI)
+ return -EOPNOTSUPP;
+
+ return spi_get_ops(bus)->xfer(bus, dev, bitlen, dout, din, flags);
+}
+
+int spi_post_bind(struct udevice *dev)
+{
+ /* Scan the bus for devices */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+int spi_post_probe(struct udevice *dev)
+{
+ struct dm_spi_bus *spi = dev->uclass_priv;
+
+ spi->max_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "spi-max-frequency", 0);
+
+ return 0;
+}
+
+int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
+ const char *dev_name, struct udevice **slavep)
+{
+ struct driver *drv;
+ int ret;
+
+ drv = lists_driver_lookup_name(drv_name);
+ if (!drv) {
+ puts("Cannot find spi_flash_std driver\n");
+ return -ENOENT;
+ }
+ ret = device_bind(bus, drv, dev_name, NULL, -1, slavep);
+ if (ret) {
+ printf("Cannot create device named '%s' (err=%d)\n",
+ dev_name, ret);
+ return ret;
+ }
+ (*slavep)->req_seq = cs;
+
+ return 0;
+}
+
+int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
+ struct udevice **devp)
+{
+ struct udevice *bus, *dev;
+ int ret;
+
+ ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus);
+ if (ret)
+ return ret;
+ ret = device_find_child_by_seq(bus, cs, false, &dev);
+ if (ret)
+ return ret;
+ *busp = bus;
+ *devp = dev;
+
+ return ret;
+}
+
+int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+ const char *drv_name, const char *dev_name,
+ struct udevice **devp, struct spi_slave **slavep)
+{
+ struct udevice *bus, *dev;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
+ if (ret) {
+ printf("Invalid bus %d (err=%d)\n", busnum, ret);
+ return ret;
+ }
+ ret = device_get_child_by_seq(bus, cs, &dev);
+
+ /**
+ * If there is no such device, create one automatically. This means
+ * that we don't need a device tree node or platform data for the
+ * SPI flash chip - we will bind to the correct driver.
+ */
+ if (ret == -ENODEV && drv_name) {
+ ret = spi_bind_device(bus, cs, drv_name, dev_name, &dev);
+ if (ret)
+ return ret;
+ }
+ if (ret) {
+ printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs,
+ ret);
+ return ret;
+ }
+
+ ret = spi_set_speed_mode(bus, speed, mode);
+ if (ret)
+ return ret;
+
+ *devp = bus;
+ *slavep = dev_get_parentdata(dev);
+
+ return 0;
+}
+
+/* Compatibility function - to be removed */
+struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
+ int bus_node)
+{
+ struct udevice *bus, *dev;
+ int ret;
+
+ ret = uclass_get_device_by_of_offset(UCLASS_SPI, bus_node, &bus);
+ if (ret)
+ return NULL;
+ ret = device_get_child_by_of_offset(bus, node, &dev);
+ if (ret)
+ return NULL;
+ return dev_get_parentdata(dev);
+}
+
+/* Compatibility function - to be removed */
+struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
+ unsigned int speed, unsigned int mode)
+{
+ struct spi_slave *slave;
+ struct udevice *dev;
+ int ret;
+
+ ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
+ &slave);
+ if (ret)
+ return NULL;
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ device_remove(slave->dev);
+ slave->dev = NULL;
+}
+
+int spi_ofdata_to_platdata(const void *blob, int node,
+ struct spi_slave *spi)
+{
+ int mode = 0;
+
+ spi->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 0);
+ if (fdtdec_get_bool(blob, node, "spi-cpol"))
+ mode |= SPI_CPOL;
+ if (fdtdec_get_bool(blob, node, "spi-cpha"))
+ mode |= SPI_CPHA;
+ if (fdtdec_get_bool(blob, node, "spi-cs-high"))
+ mode |= SPI_CS_HIGH;
+ if (fdtdec_get_bool(blob, node, "spi-half-duplex"))
+ mode |= SPI_PREAMBLE;
+ spi->mode = mode;
+
+ return 0;
+}
+
+UCLASS_DRIVER(spi) = {
+ .id = UCLASS_SPI,
+ .name = "spi",
+ .post_bind = spi_post_bind,
+ .post_probe = spi_post_probe,
+ .per_device_auto_alloc_size = sizeof(struct dm_spi_bus),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 7f0e37b..8207483 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -22,6 +22,7 @@ enum uclass_id {
/* U-Boot uclasses start here */
UCLASS_GPIO, /* Bank of general-purpose I/O pins */
UCLASS_SERIAL, /* Serial UART */
+ UCLASS_SPI, /* SPI bus */
UCLASS_COUNT,
UCLASS_INVALID = -1,
diff --git a/include/spi.h b/include/spi.h
index b673be2..b5e9347 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -54,11 +54,19 @@
#define SPI_DEFAULT_WORDLEN 8
+#ifdef CONFIG_DM_SPI
+struct dm_spi_bus {
+ uint max_hz;
+};
+
+#endif /* CONFIG_DM_SPI */
+
/**
* struct spi_slave - Representation of a SPI slave
*
* Drivers are expected to extend this with controller-specific data.
*
+ * @dev: SPI slave device
* @bus: ID of the bus that the slave is attached to.
* @cs: ID of the chip select connected to the slave.
* @op_mode_rx: SPI RX operation mode.
@@ -71,8 +79,14 @@
* @flags: Indication of SPI flags.
*/
struct spi_slave {
+#ifdef CONFIG_DM_SPI
+ struct udevice *dev; /* struct spi_slave is dev->parentdata */
+ uint max_hz;
+ uint mode;
+#else
unsigned int bus;
unsigned int cs;
+#endif
u8 op_mode_rx;
u8 op_mode_tx;
unsigned int wordlen;
@@ -220,6 +234,8 @@ int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen);
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags);
+#ifndef CONFIG_DM_SPI
+
/**
* Determine if a SPI chipselect is valid.
* This function is provided by the board if the low-level SPI driver
@@ -255,6 +271,7 @@ void spi_cs_deactivate(struct spi_slave *slave);
* @hz: The transfer speed
*/
void spi_set_speed(struct spi_slave *slave, uint hz);
+#endif
/**
* Write 8 bits, then read 8 bits.
@@ -305,4 +322,127 @@ struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
int node);
+#ifdef CONFIG_DM_SPI
+
+/**
+ * struct struct dm_spi_ops - Driver model SPI operations
+ *
+ * The uclass interface is implemented by all SPI devices which use
+ * driver model.
+ */
+struct dm_spi_ops {
+ /**
+ * Claim the bus and prepare it for communication.
+ *
+ * The device privided is the slave device. It's parent controller
+ * will be used to provide the communication.
+ *
+ * This must be called before doing any transfers with a SPI slave. It
+ * will enable and initialize any SPI hardware as necessary, and make
+ * sure that the SCK line is in the correct idle state. It is not
+ * allowed to claim the same bus for several slaves without releasing
+ * the bus in between.
+ *
+ * @device: The SPI slave
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+ int (*claim_bus)(struct udevice *device);
+
+ /**
+ * Release the SPI bus
+ *
+ * This must be called once for every call to spi_claim_bus() after
+ * all transfers have finished. It may disable any SPI hardware as
+ * appropriate.
+ *
+ * @device: The SPI slave
+ */
+ int (*release_bus)(struct udevice *device);
+
+ /**
+ * Set the word length for SPI transactions
+ *
+ * Set the word length (number of bits per word) for SPI transactions.
+ *
+ * @device: The SPI slave
+ * @wordlen: The number of bits in a word
+ *
+ * Returns: 0 on success, -ve on failure.
+ */
+ int (*set_wordlen)(struct udevice *deiuce, unsigned int wordlen);
+
+ /**
+ * SPI transfer
+ *
+ * This writes "bitlen" bits out the SPI MOSI port and simultaneously
+ * clocks "bitlen" bits in the SPI MISO port. That's just the way SPI
+ * works.
+ *
+ * The source of the outgoing bits is the "dout" parameter and the
+ * destination of the input bits is the "din" parameter. Note that
+ * "dout" and "din" can point to the same memory location, in which
+ * case the input data overwrites the output data (since both are
+ * buffered by temporary variables, this is OK).
+ *
+ * spi_xfer() interface:
+ * @device: The SPI bus which will be sending/receiving the data.
+ * @slave: The slave device to communicate with
+ * @bitlen: How many bits to write and read.
+ * @dout: Pointer to a string of bits to send out. The bits are
+ * held in a byte array and are sent MSB first.
+ * @din: Pointer to a string of bits that will be filled in.
+ * @flags: A bitwise combination of SPI_XFER_* flags.
+ *
+ * Returns: 0 on success, not -1 on failure
+ */
+ int (*xfer)(struct udevice *device, struct udevice *slave,
+ unsigned int bitlen, const void *dout, void *din,
+ unsigned long flags);
+
+ /**
+ * Set transfer speed.
+ * This sets a new speed to be applied for next spi_xfer().
+ * @slave: The SPI slave
+ * @hz: The transfer speed
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_speed)(struct udevice *device, uint hz);
+
+ /**
+ * Set the SPI mode/flags
+ *
+ * It is unclear if we want to set speed and mode together instead
+ * of separately.
+ *
+ * @slave: The SPI slave
+ * @mode: Requested SPI mode (SPI_... flags)
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_mode)(struct udevice *device, uint mode);
+};
+
+int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
+ struct udevice **devp);
+
+int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+ const char *drv_name, const char *dev_name,
+ struct udevice **devp, struct spi_slave **slavep);
+
+int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
+ const char *dev_name, struct udevice **slavep);
+
+int spi_ofdata_to_platdata(const void *blob, int node,
+ struct spi_slave *spi);
+
+struct sandbox_state;
+int sandbox_spi_get_emul(struct sandbox_state *state,
+ struct udevice *bus, struct udevice *slave,
+ struct udevice **emulp);
+
+/* Access the serial operations for a device */
+#define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops)
+#endif /* CONFIG_DM_SPI */
+
#endif /* _SPI_H_ */
--
2.0.0.526.g5318336
More information about the U-Boot
mailing list