[U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

On mx6solox there is an additional 0x4000 offset for the GPR registers.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
This applies against 'next' branch.

 arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 782d9c4..cc746b8 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -398,6 +398,9 @@ struct src {
 
 
 struct iomuxc {
+#ifdef CONFIG_MX6SX
+	u8 reserved[0x4000];
+#endif
 	u32 gpr[14];
 	u32 omux[5];
 	/* mux and pad registers */
-- 
1.8.3.2