[U-Boot] [RFC PATCH v4 10/11] exynos: gpio: Convert to driver model
Simon Glass
sjg at chromium.org
Fri Jul 11 07:00:47 CEST 2014
Convert the exynos GPIO driver to driver model. This implements the generic
GPIO interface but not the extra Exynos-specific functions.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpio/s5p_gpio.c | 419 +++++++++++++++++++++++++++++--------------
include/configs/exynos4-dt.h | 4 +
include/configs/exynos5-dt.h | 4 +
3 files changed, 291 insertions(+), 136 deletions(-)
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 99f2dd8..7fd97e2 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -6,8 +6,15 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK)
@@ -26,101 +33,19 @@
#define RATE_MASK(gpio) (0x1 << (gpio + 16))
#define RATE_SET(gpio) (0x1 << (gpio + 16))
-#define name_to_gpio(n) s5p_name_to_gpio(n)
-static inline int s5p_name_to_gpio(const char *name)
-{
- unsigned num, irregular_set_number, irregular_bank_base;
- const struct gpio_name_num_table *tabp;
- char this_bank, bank_name, irregular_bank_name;
- char *endp;
-
- /*
- * The gpio name starts with either 'g' or 'gp' followed by the bank
- * name character. Skip one or two characters depending on the prefix.
- */
- if (name[0] == 'g' && name[1] == 'p')
- name += 2;
- else if (name[0] == 'g')
- name++;
- else
- return -1; /* Name must start with 'g' */
-
- bank_name = *name++;
- if (!*name)
- return -1; /* At least one digit is required/expected. */
-
- /*
- * On both exynos5 and exynos5420 architectures there is a bank of
- * GPIOs which does not fall into the regular address pattern. Those
- * banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below
- * assignments help to handle these irregularities.
- */
-#if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5)
- if (cpu_is_exynos5()) {
- if (proid_is_exynos5420()) {
- tabp = exynos5420_gpio_table;
- irregular_bank_name = 'y';
- irregular_set_number = '7';
- irregular_bank_base = EXYNOS5420_GPIO_Y70;
- } else {
- tabp = exynos5_gpio_table;
- irregular_bank_name = 'c';
- irregular_set_number = '4';
- irregular_bank_base = EXYNOS5_GPIO_C40;
- }
- } else {
- if (proid_is_exynos4412())
- tabp = exynos4x12_gpio_table;
- else
- tabp = exynos4_gpio_table;
- irregular_bank_name = 0;
- irregular_set_number = 0;
- irregular_bank_base = 0;
- }
-#else
- if (cpu_is_s5pc110())
- tabp = s5pc110_gpio_table;
- else
- tabp = s5pc100_gpio_table;
- irregular_bank_name = 0;
- irregular_set_number = 0;
- irregular_bank_base = 0;
-#endif
+#define GPIO_NAME_SIZE 20
- this_bank = tabp->bank;
- do {
- if (bank_name == this_bank) {
- unsigned pin_index; /* pin number within the bank */
- if ((bank_name == irregular_bank_name) &&
- (name[0] == irregular_set_number)) {
- pin_index = name[1] - '0';
- /* Irregular sets have 8 pins. */
- if (pin_index >= GPIO_PER_BANK)
- return -1;
- num = irregular_bank_base + pin_index;
- } else {
- pin_index = simple_strtoul(name, &endp, 8);
- pin_index -= tabp->bank_offset;
- /*
- * Sanity check: bunk 'z' has no set number,
- * for all other banks there must be exactly
- * two octal digits, and the resulting number
- * should not exceed the number of pins in the
- * bank.
- */
- if (((bank_name != 'z') && !name[1]) ||
- *endp ||
- (pin_index >= tabp->bank_size))
- return -1;
- num = tabp->base + pin_index;
- }
- return num;
- }
- this_bank = (++tabp)->bank;
- } while (this_bank);
+/* Platform data for each bank */
+struct exynos_gpio_platdata {
+ struct s5p_gpio_bank *bank;
+ const char *bank_name; /* Name of port, e.g. 'gpa0" */
+};
- return -1;
-}
+/* Information about each bank at run-time */
+struct exynos_bank_info {
+ char label[GPIO_PER_BANK][GPIO_NAME_SIZE];
+ struct s5p_gpio_bank *bank;
+};
static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
{
@@ -132,35 +57,34 @@ static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
writel(value, &bank->con);
}
-static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
+#ifndef CONFIG_SPL_BUILD
+static int s5p_gpio_get_cfg_pin(struct s5p_gpio_bank *bank, int gpio)
{
unsigned int value;
- value = readl(&bank->dat);
- value &= ~DAT_MASK(gpio);
- if (en)
- value |= DAT_SET(gpio);
- writel(value, &bank->dat);
+ value = readl(&bank->con);
+ value &= CON_MASK(gpio);
+ return CON_SFR_UNSHIFT(value, gpio);
}
-static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank,
- int gpio, int en)
+static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
{
- s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT);
- s5p_gpio_set_value(bank, gpio, en);
-}
+ unsigned int value;
-static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
-{
- s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT);
+ value = readl(&bank->dat);
+ return !!(value & DAT_MASK(gpio));
}
+#endif
-static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
+static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
value = readl(&bank->dat);
- return !!(value & DAT_MASK(gpio));
+ value &= ~DAT_MASK(gpio);
+ if (en)
+ value |= DAT_SET(gpio);
+ writel(value, &bank->dat);
}
static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
@@ -254,66 +178,289 @@ int s5p_gpio_get_pin(unsigned gpio)
return S5P_GPIO_GET_PIN(gpio);
}
-/* Common GPIO API */
+#ifdef CONFIG_SPL_BUILD
+/* Common GPIO API - SPL does not support driver model yet */
+int gpio_set_value(unsigned gpio, int value)
+{
+ s5p_gpio_set_value(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), value);
+
+ return 0;
+}
+#endif /* CONFIG_SPL_BUILD */
+
+/* There is no common GPIO API for pull, drv, pin, rate (yet) */
+void gpio_set_pull(int gpio, int mode)
+{
+ s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
+
+void gpio_set_drv(int gpio, int mode)
+{
+ s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
+
+void gpio_cfg_pin(int gpio, int cfg)
+{
+ s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), cfg);
+}
+
+void gpio_set_rate(int gpio, int mode)
+{
+ s5p_gpio_set_rate(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
-int gpio_request(unsigned gpio, const char *label)
+/* Driver model interface */
+#ifndef CONFIG_SPL_BUILD
+static int exynos_gpio_get_state(struct udevice *dev, unsigned int offset,
+ char *buf, int bufsize)
{
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ const char *label;
+ bool is_output;
+ int size;
+ int cfg;
+
+ label = state->label[offset];
+ cfg = s5p_gpio_get_cfg_pin(state->bank, offset);
+ is_output = cfg == S5P_GPIO_OUTPUT;
+ size = snprintf(buf, bufsize, "%s%d: ",
+ uc_priv->bank_name ? uc_priv->bank_name : "", offset);
+ buf += size;
+ bufsize -= size;
+ if (is_output || cfg == S5P_GPIO_INPUT) {
+ snprintf(buf, bufsize, "%s: %d [%c]%s%s",
+ is_output ? "out" : " in",
+ s5p_gpio_get_value(state->bank, offset),
+ *label ? 'x' : ' ',
+ *label ? " " : "",
+ label);
+ } else {
+ snprintf(buf, bufsize, "sfpio");
+ }
+
return 0;
}
-int gpio_free(unsigned gpio)
+static int check_reserved(struct udevice *dev, unsigned offset,
+ const char *func)
{
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+ if (!*state->label[offset]) {
+ printf("exynos_gpio: %s: error: gpio %s%d not reserved\n",
+ func, uc_priv->bank_name, offset);
+ return -EPERM;
+ }
+
return 0;
}
-int gpio_direction_input(unsigned gpio)
+static int exynos_gpio_request(struct udevice *dev, unsigned offset,
+ const char *label)
{
- s5p_gpio_direction_input(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio));
+ struct exynos_bank_info *state = dev_get_priv(dev);
+
+ if (*state->label[offset])
+ return -EBUSY;
+
+ strncpy(state->label[offset], label, GPIO_NAME_SIZE);
+ state->label[offset][GPIO_NAME_SIZE - 1] = '\0';
+
return 0;
}
-int gpio_direction_output(unsigned gpio, int value)
+static int exynos_gpio_free(struct udevice *dev, unsigned offset)
{
- s5p_gpio_direction_output(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), value);
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int ret;
+
+ ret = check_reserved(dev, offset, __func__);
+ if (ret)
+ return ret;
+ state->label[offset][0] = '\0';
+
return 0;
}
-int gpio_get_value(unsigned gpio)
+/* set GPIO pin 'gpio' as an input */
+static int exynos_gpio_direction_input(struct udevice *dev, unsigned offset)
{
- return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio));
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int ret;
+
+ ret = check_reserved(dev, offset, __func__);
+ if (ret)
+ return ret;
+
+ /* Configure GPIO direction as input. */
+ s5p_gpio_cfg_pin(state->bank, offset, S5P_GPIO_INPUT);
+
+ return 0;
}
-int gpio_set_value(unsigned gpio, int value)
+/* set GPIO pin 'gpio' as an output, with polarity 'value' */
+static int exynos_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
{
- s5p_gpio_set_value(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), value);
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int ret;
+
+ ret = check_reserved(dev, offset, __func__);
+ if (ret)
+ return ret;
+
+ /* Configure GPIO output value. */
+ s5p_gpio_set_value(state->bank, offset, value);
+
+ /* Configure GPIO direction as output. */
+ s5p_gpio_cfg_pin(state->bank, offset, S5P_GPIO_OUTPUT);
return 0;
}
-void gpio_set_pull(int gpio, int mode)
+/* read GPIO IN value of pin 'gpio' */
+static int exynos_gpio_get_value(struct udevice *dev, unsigned offset)
{
- s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), mode);
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int ret;
+
+ ret = check_reserved(dev, offset, __func__);
+ if (ret)
+ return ret;
+
+ return s5p_gpio_get_value(state->bank, offset);
}
-void gpio_set_drv(int gpio, int mode)
+/* write GPIO OUT value to pin 'gpio' */
+static int exynos_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
{
- s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), mode);
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int ret;
+
+ ret = check_reserved(dev, offset, __func__);
+ if (ret)
+ return ret;
+
+ s5p_gpio_set_value(state->bank, offset, value);
+
+ return 0;
}
-void gpio_cfg_pin(int gpio, int cfg)
+static int exynos_gpio_get_function(struct udevice *dev, unsigned offset)
{
- s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), cfg);
+ struct exynos_bank_info *state = dev_get_priv(dev);
+ int cfg;
+
+ if (!*state->label[offset])
+ return GPIOF_UNUSED;
+ cfg = s5p_gpio_get_cfg_pin(state->bank, offset);
+ if (cfg == S5P_GPIO_OUTPUT)
+ return GPIOF_OUTPUT;
+ else if (cfg == S5P_GPIO_INPUT)
+ return GPIOF_INPUT;
+ else
+ return GPIOF_FUNC;
}
-void gpio_set_rate(int gpio, int mode)
+static const struct dm_gpio_ops gpio_exynos_ops = {
+ .request = exynos_gpio_request,
+ .free = exynos_gpio_free,
+ .direction_input = exynos_gpio_direction_input,
+ .direction_output = exynos_gpio_direction_output,
+ .get_value = exynos_gpio_get_value,
+ .set_value = exynos_gpio_set_value,
+ .get_function = exynos_gpio_get_function,
+ .get_state = exynos_gpio_get_state,
+};
+
+static int gpio_exynos_probe(struct udevice *dev)
{
- s5p_gpio_set_rate(s5p_gpio_get_bank(gpio),
- s5p_gpio_get_pin(gpio), mode);
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+ struct exynos_bank_info *priv = dev->priv;
+ struct exynos_gpio_platdata *plat = dev->platdata;
+
+ /* Only child devices have ports */
+ if (!plat)
+ return 0;
+
+ priv->bank = plat->bank;
+
+ uc_priv->gpio_count = GPIO_PER_BANK;
+ uc_priv->bank_name = plat->bank_name;
+
+ return 0;
+}
+
+/**
+ * We have a top-level GPIO device with no actual GPIOs. It has a child
+ * device for each Exynos GPIO bank.
+ */
+static int gpio_exynos_bind(struct udevice *parent)
+{
+ struct exynos_gpio_platdata *plat = parent->platdata;
+ struct s5p_gpio_bank *bank, *base;
+ const void *blob = gd->fdt_blob;
+ int node;
+
+ /* If this is a child device, there is nothing to do here */
+ if (plat)
+ return 0;
+
+ base = (struct s5p_gpio_bank *)fdtdec_get_addr(gd->fdt_blob,
+ parent->of_offset, "reg");
+ for (node = fdt_first_subnode(blob, parent->of_offset), bank = base;
+ node > 0;
+ node = fdt_next_subnode(blob, node), bank++) {
+ struct exynos_gpio_platdata *plat;
+ struct udevice *dev;
+ fdt_addr_t reg;
+ int ret;
+
+ if (!fdtdec_get_bool(blob, node, "gpio-controller"))
+ continue;
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+ reg = fdtdec_get_addr(blob, node, "reg");
+ if (reg != FDT_ADDR_T_NONE)
+ bank = (struct s5p_gpio_bank *)((ulong)base + reg);
+ plat->bank = bank;
+ plat->bank_name = fdt_get_name(blob, node, NULL);
+ debug("dev at %p: %s\n", bank, plat->bank_name);
+
+ ret = device_bind(parent, parent->driver,
+ plat->bank_name, plat, -1, &dev);
+ if (ret)
+ return ret;
+ dev->of_offset = parent->of_offset;
+ }
+
+ return 0;
}
+
+static const struct udevice_id exynos_gpio_ids[] = {
+ { .compatible = "samsung,exynos4210-pinctrl" },
+ { .compatible = "samsung,exynos4x12-pinctrl" },
+ { .compatible = "samsung,exynos5250-pinctrl" },
+ { .compatible = "samsung,exynos5420-pinctrl" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_exynos) = {
+ .name = "gpio_exynos",
+ .id = UCLASS_GPIO,
+ .of_match = exynos_gpio_ids,
+ .bind = gpio_exynos_bind,
+ .probe = gpio_exynos_probe,
+ .priv_auto_alloc_size = sizeof(struct exynos_bank_info),
+ .ops = &gpio_exynos_ops,
+};
+#endif
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
index 44e6ab4..32fbc80 100644
--- a/include/configs/exynos4-dt.h
+++ b/include/configs/exynos4-dt.h
@@ -16,6 +16,10 @@
#include <asm/arch/cpu.h> /* get chip and board defs */
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO
+
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index fb03500..cc3a409 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -16,6 +16,10 @@
#include <asm/arch/cpu.h> /* get chip and board defs */
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO
+
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
--
2.0.0.526.g5318336
More information about the U-Boot
mailing list