[U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process

Murali Karicheri m-karicheri2 at ti.com
Thu Jul 3 17:11:29 CEST 2014


On 07/02/2014 04:36 PM, Ivan Khoronzhuk wrote:
> Add script to automate NAND flash process. As for now the board has
> two burn scripts - burn to boot from SPI NOR flash and burn to boot
> from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi.
> Also update README to contain NAND burn U-boot process description.
>
> Signed-off-by: Ivan Khoronzhuk<ivan.khoronzhuk at ti.com>
> ---
>   board/ti/k2hk_evm/README   | 27 ++++++++++++++++++++++++++-
>   include/configs/k2hk_evm.h |  4 +++-
>   2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README
> index bfeb05b..1da721c 100644
> --- a/board/ti/k2hk_evm/README
> +++ b/board/ti/k2hk_evm/README
> @@ -43,6 +43,7 @@ Supported image formats:-
>    - u-boot.bin: for loading and running u-boot.bin through Texas instruments
>                  code composure studio (CCS)
>    - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
> + - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot
>

Please also update the supported boot modes to include NAND boot under 
the section "Supported boot modes:"

>   Build instructions:
>   ===================
> @@ -55,6 +56,10 @@ To build u-boot-spi.gph
>     >make k2hk_evm_config
>     >make u-boot-spi.gph
>
> +To build u-boot-nand.gph
> +>make k2hk_evm_config
> +>make u-boot-nand.gph
> +

Murali


More information about the U-Boot mailing list