[U-Boot] [U-boot] [Patch 3/3] k2hk_evm: add script to automate NAND flash process

[Ivan Khoronzhuk]

On 07/03/2014 06:11 PM, Murali Karicheri wrote:
> On 07/02/2014 04:36 PM, Ivan Khoronzhuk wrote:
>> Add script to automate NAND flash process. As for now the board has
>> two burn scripts - burn to boot from SPI NOR flash and burn to boot
>> from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi.
>> Also update README to contain NAND burn U-boot process description.
>>
>> Signed-off-by: Ivan Khoronzhuk<ivan.khoronzhuk at ti.com>
>> ---
>>   board/ti/k2hk_evm/README   | 27 ++++++++++++++++++++++++++-
>>   include/configs/k2hk_evm.h |  4 +++-
>>   2 files changed, 29 insertions(+), 2 deletions(-)
>>
>> diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README
>> index bfeb05b..1da721c 100644
>> --- a/board/ti/k2hk_evm/README
>> +++ b/board/ti/k2hk_evm/README
>> @@ -43,6 +43,7 @@ Supported image formats:-
>>    - u-boot.bin: for loading and running u-boot.bin through Texas 
>> instruments
>>                  code composure studio (CCS)
>>    - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI 
>> NOR boot
>> + - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for 
>> NAND boot
>>
>
> Please also update the supported boot modes to include NAND boot under 
> the section "Supported boot modes:"

I'll add
Thanks.

>
>>   Build instructions:
>>   ===================
>> @@ -55,6 +56,10 @@ To build u-boot-spi.gph
>>     >make k2hk_evm_config
>>     >make u-boot-spi.gph
>>
>> +To build u-boot-nand.gph
>> +>make k2hk_evm_config
>> +>make u-boot-nand.gph
>> +
>
> Murali

-- 
Regards,
Ivan Khoronzhuk