[U-Boot] [PATCH] lcd: support displaying 24bpp BMPs on >= 24bpp LCDs

[Hannes Petermaier]

most todays LCDs support 32bpp e.g. the framebuffer memory is 32bpp
organized.

To support 24bpp BMPs we need to take only 3 byte from the bpp and set
one byte from the FB to 0.

Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>
---
 common/lcd.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/common/lcd.c b/common/lcd.c
index 54bbf9a..82ea73f 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -982,8 +982,13 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 		return 1;
 	}
 
-	/* We support displaying 8bpp BMPs on 16bpp LCDs */
-	if (bpix != bmp_bpix && !(bmp_bpix == 8 && bpix == 16)) {
+	/*
+	 * We support displaying 8bpp BMPs on 16bpp LCDs
+	 * and displaying 24bpp BMPs on 32bpp LCDs
+	 * */
+	if (bpix != bmp_bpix &&
+	    !(bmp_bpix == 8 && bpix == 16) &&
+	    !(bmp_bpix == 24 && bpix == 32)) {
 		printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
 			bpix, get_unaligned_le16(&bmp->header.bit_count));
 		return 1;
@@ -1104,7 +1109,19 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 		}
 		break;
 #endif /* CONFIG_BMP_16BPP */
-
+#if defined(CONFIG_BMP_24BMP)
+	case 24:
+		for (i = 0; i < height; ++i) {
+			for (j = 0; j < width; j++) {
+				*(fb++) = *(bmap++);
+				*(fb++) = *(bmap++);
+				*(fb++) = *(bmap++);
+				*(fb++) = 0;
+			}
+			fb -= lcd_line_length + width * (bpix / 8);
+		}
+		break;
+#endif /* CONFIG_BMP_24BMP */
 #if defined(CONFIG_BMP_32BPP)
 	case 32:
 		for (i = 0; i < height; ++i) {
-- 
1.7.9.5