[U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions
Ivan Khoronzhuk
ivan.khoronzhuk at ti.com
Wed Jul 9 22:44:44 CEST 2014
Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and
add KS2_ prefix where it's needed. It requires to change names also
in places where they're used. Align lines and remove redundant
definitions in kardware-k2hk.h at the same time.
Using common KS2_ prefix helps resolve redundant redefinitions and
adds opportunity to use KS2_ definition across a project not thinking about
what SoC should be used. It's more convenient and we don't need to worry
about the SoC type in common files, hardware.h will think about that.
The hardware.h decides definitions of what SoC to use.
Acked-by: Murali Karicheri <m-karicheri2 at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
arch/arm/cpu/armv7/keystone/clock.c | 24 +--
arch/arm/cpu/armv7/keystone/ddr3.c | 8 +-
arch/arm/cpu/armv7/keystone/init.c | 4 +-
arch/arm/cpu/armv7/keystone/keystone.c | 2 +-
arch/arm/cpu/armv7/keystone/msmc.c | 2 +-
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 2 +-
arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +-
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 202 ++++++++++-----------
arch/arm/include/asm/arch-keystone/hardware.h | 4 +-
board/ti/k2hk_evm/ddr3.c | 24 +--
include/configs/k2hk_evm.h | 12 +-
11 files changed, 138 insertions(+), 148 deletions(-)
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
index bfa4c9d..f905fdc 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -29,11 +29,11 @@ struct pll_regs {
};
static const struct pll_regs pll_regs[] = {
- [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1},
- [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1},
- [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1},
- [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1},
- [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1},
+ [CORE_PLL] = { KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
+ [PASS_PLL] = { KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
+ [TETRIS_PLL] = { KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
+ [DDR3A_PLL] = { KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
+ [DDR3B_PLL] = { KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
};
/* Fout = Fref * NF(mult) / NR(prediv) / OD */
@@ -47,7 +47,7 @@ static unsigned long pll_freq_get(int pll)
ret = external_clk[sys_clk];
if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
/* PLL mode */
- tmp = __raw_readl(K2HK_MAINPLLCTL0);
+ tmp = __raw_readl(KS2_MAINPLLCTL0);
prediv = (tmp & PLL_DIV_MASK) + 1;
mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
(pllctl_reg_read(pll, mult) &
@@ -61,19 +61,19 @@ static unsigned long pll_freq_get(int pll)
switch (pll) {
case PASS_PLL:
ret = external_clk[pa_clk];
- reg = K2HK_PASSPLLCTL0;
+ reg = KS2_PASSPLLCTL0;
break;
case TETRIS_PLL:
ret = external_clk[tetris_clk];
- reg = K2HK_ARMPLLCTL0;
+ reg = KS2_ARMPLLCTL0;
break;
case DDR3A_PLL:
ret = external_clk[ddr3a_clk];
- reg = K2HK_DDR3APLLCTL0;
+ reg = KS2_DDR3APLLCTL0;
break;
case DDR3B_PLL:
ret = external_clk[ddr3b_clk];
- reg = K2HK_DDR3BPLLCTL0;
+ reg = KS2_DDR3BPLLCTL0;
break;
default:
return 0;
@@ -214,7 +214,7 @@ void init_pll(const struct pll_init_data *data)
* Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
* only applicable for Kepler
*/
- clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
/* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
setbits_le32(pll_regs[data->pll].reg1 ,
PLL_PLLRST | PLLCTL_ENSAT);
@@ -255,7 +255,7 @@ void init_pll(const struct pll_init_data *data)
* 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
* only applicable for Kepler
*/
- setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
} else {
setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT);
/*
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c
index b711b81..2391e79 100644
--- a/arch/arm/cpu/armv7/keystone/ddr3.c
+++ b/arch/arm/cpu/armv7/keystone/ddr3.c
@@ -74,15 +74,15 @@ void ddr3_reset_ddrphy(void)
u32 tmp;
/* Assert DDR3A PHY reset */
- tmp = readl(K2HK_DDR3APLLCTL1);
+ tmp = readl(KS2_DDR3APLLCTL1);
tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
- writel(tmp, K2HK_DDR3APLLCTL1);
+ writel(tmp, KS2_DDR3APLLCTL1);
/* wait 10us to catch the reset */
udelay(10);
/* Release DDR3A PHY reset */
- tmp = readl(K2HK_DDR3APLLCTL1);
+ tmp = readl(KS2_DDR3APLLCTL1);
tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
- __raw_writel(tmp, K2HK_DDR3APLLCTL1);
+ __raw_writel(tmp, KS2_DDR3APLLCTL1);
}
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 4df5ae1..f4c293a 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -15,8 +15,8 @@
void chip_configuration_unlock(void)
{
- __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0);
- __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1);
+ __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
+ __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
}
int arch_cpu_init(void)
diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c
index 1c8c038..11a9357 100644
--- a/arch/arm/cpu/armv7/keystone/keystone.c
+++ b/arch/arm/cpu/armv7/keystone/keystone.c
@@ -23,7 +23,7 @@ int cpu_to_bus(u32 *ptr, u32 length)
{
u32 i;
- if (!(readl(K2HK_DEVSTAT) & 0x1))
+ if (!(readl(KS2_DEVSTAT) & 0x1))
for (i = 0; i < length; i++, ptr++)
*ptr = cpu_to_be32(*ptr);
diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c
index f3f1621..af858fa 100644
--- a/arch/arm/cpu/armv7/keystone/msmc.c
+++ b/arch/arm/cpu/armv7/keystone/msmc.c
@@ -58,7 +58,7 @@ struct msms_regs {
void share_all_segments(int priv_id)
{
- struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE;
+ struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
int j;
for (j = 0; j < 8; j++) {
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
index 6a69a8d..ed1225c 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -56,7 +56,7 @@ enum clk_e {
sys_clk3_clk
};
-#define K2HK_CLK1_6 sys_clk0_6_clk
+#define KS2_CLK1_6 sys_clk0_6_clk
/* PLL identifiers */
enum pll_type_e {
diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h
index b251aff..e545341 100644
--- a/arch/arm/include/asm/arch-keystone/clock_defs.h
+++ b/arch/arm/include/asm/arch-keystone/clock_defs.h
@@ -50,7 +50,7 @@ struct pllctl_regs {
};
static struct pllctl_regs *pllctl_regs[] = {
- (struct pllctl_regs *)(CLOCK_BASE + 0x100)
+ (struct pllctl_regs *)(KS2_CLOCK_BASE + 0x100)
};
#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg))
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 5e2f659..e7dff05 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -6,134 +6,124 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
+
#ifndef __ASM_ARCH_HARDWARE_K2HK_H
#define __ASM_ARCH_HARDWARE_K2HK_H
-#define K2HK_PLL_CNTRL_BASE 0x02310000
-#define CLOCK_BASE K2HK_PLL_CNTRL_BASE
-#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8)
-#define KS2_RSTCTRL_KEY 0x5a69
-#define KS2_RSTCTRL_MASK 0xffff0000
-#define KS2_RSTCTRL_SWRST 0xfffe0000
+#define KS2_PLL_CNTRL_BASE 0x02310000
+#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE
+#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8)
+#define KS2_RSTCTRL_KEY 0x5a69
+#define KS2_RSTCTRL_MASK 0xffff0000
+#define KS2_RSTCTRL_SWRST 0xfffe0000
-#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
-#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
-#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
+#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
+#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
-#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
+#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
-#define ARM_PLL_EN BIT(13)
+#define KS2_ARM_PLL_EN BIT(13)
-#define K2HK_SPI0_BASE 0x21000400
-#define K2HK_SPI1_BASE 0x21000600
-#define K2HK_SPI2_BASE 0x21000800
-#define K2HK_SPI_BASE K2HK_SPI0_BASE
+#define KS2_SPI0_BASE 0x21000400
+#define KS2_SPI1_BASE 0x21000600
+#define KS2_SPI2_BASE 0x21000800
+#define KS2_SPI_BASE KS2_SPI0_BASE
/* Chip configuration unlock codes and registers */
-#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
-#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
-#define KEYSTONE_KICK0_MAGIC 0x83e70b13
-#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0
+#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
+#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
+#define KS2_KICK0_MAGIC 0x83e70b13
+#define KS2_KICK1_MAGIC 0x95a4f1e0
/* PA SS Registers */
-#define KS2_PASS_BASE 0x02000000
+#define KS2_PASS_BASE 0x02000000
/* PLL control registers */
-#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
-#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
-#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
-#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
-#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
-#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
-#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368)
-#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
-#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
-#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
+#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
+#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
+#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
+#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
+#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
+#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
+#define KS2_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368)
+#define KS2_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
+#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
+#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
/* Power and Sleep Controller (PSC) Domains */
-#define K2HK_LPSC_MOD 0
-#define K2HK_LPSC_DUMMY1 1
-#define K2HK_LPSC_USB 2
-#define K2HK_LPSC_EMIF25_SPI 3
-#define K2HK_LPSC_TSIP 4
-#define K2HK_LPSC_DEBUGSS_TRC 5
-#define K2HK_LPSC_TETB_TRC 6
-#define K2HK_LPSC_PKTPROC 7
-#define KS2_LPSC_PA K2HK_LPSC_PKTPROC
-#define K2HK_LPSC_SGMII 8
-#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII
-#define K2HK_LPSC_CRYPTO 9
-#define K2HK_LPSC_PCIE 10
-#define K2HK_LPSC_SRIO 11
-#define K2HK_LPSC_VUSR0 12
-#define K2HK_LPSC_CHIP_SRSS 13
-#define K2HK_LPSC_MSMC 14
-#define K2HK_LPSC_GEM_1 16
-#define K2HK_LPSC_GEM_2 17
-#define K2HK_LPSC_GEM_3 18
-#define K2HK_LPSC_GEM_4 19
-#define K2HK_LPSC_GEM_5 20
-#define K2HK_LPSC_GEM_6 21
-#define K2HK_LPSC_GEM_7 22
-#define K2HK_LPSC_EMIF4F_DDR3A 23
-#define K2HK_LPSC_EMIF4F_DDR3B 24
-#define K2HK_LPSC_TAC 25
-#define K2HK_LPSC_RAC 26
-#define K2HK_LPSC_RAC_1 27
-#define K2HK_LPSC_FFTC_A 28
-#define K2HK_LPSC_FFTC_B 29
-#define K2HK_LPSC_FFTC_C 30
-#define K2HK_LPSC_FFTC_D 31
-#define K2HK_LPSC_FFTC_E 32
-#define K2HK_LPSC_FFTC_F 33
-#define K2HK_LPSC_AI2 34
-#define K2HK_LPSC_TCP3D_0 35
-#define K2HK_LPSC_TCP3D_1 36
-#define K2HK_LPSC_TCP3D_2 37
-#define K2HK_LPSC_TCP3D_3 38
-#define K2HK_LPSC_VCP2X4_A 39
-#define K2HK_LPSC_CP2X4_B 40
-#define K2HK_LPSC_VCP2X4_C 41
-#define K2HK_LPSC_VCP2X4_D 42
-#define K2HK_LPSC_VCP2X4_E 43
-#define K2HK_LPSC_VCP2X4_F 44
-#define K2HK_LPSC_VCP2X4_G 45
-#define K2HK_LPSC_VCP2X4_H 46
-#define K2HK_LPSC_BCP 47
-#define K2HK_LPSC_DXB 48
-#define K2HK_LPSC_VUSR1 49
-#define K2HK_LPSC_XGE 50
-#define K2HK_LPSC_ARM_SREFLEX 51
+#define KS2_LPSC_MOD 0
+#define KS2_LPSC_DUMMY1 1
+#define KS2_LPSC_USB 2
+#define KS2_LPSC_EMIF25_SPI 3
+#define KS2_LPSC_TSIP 4
+#define KS2_LPSC_DEBUGSS_TRC 5
+#define KS2_LPSC_TETB_TRC 6
+#define KS2_LPSC_PKTPROC 7
+#define KS2_LPSC_PA KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII 8
+#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO 9
+#define KS2_LPSC_PCIE 10
+#define KS2_LPSC_SRIO 11
+#define KS2_LPSC_VUSR0 12
+#define KS2_LPSC_CHIP_SRSS 13
+#define KS2_LPSC_MSMC 14
+#define KS2_LPSC_GEM_1 16
+#define KS2_LPSC_GEM_2 17
+#define KS2_LPSC_GEM_3 18
+#define KS2_LPSC_GEM_4 19
+#define KS2_LPSC_GEM_5 20
+#define KS2_LPSC_GEM_6 21
+#define KS2_LPSC_GEM_7 22
+#define KS2_LPSC_EMIF4F_DDR3A 23
+#define KS2_LPSC_EMIF4F_DDR3B 24
+#define KS2_LPSC_TAC 25
+#define KS2_LPSC_RAC 26
+#define KS2_LPSC_RAC_1 27
+#define KS2_LPSC_FFTC_A 28
+#define KS2_LPSC_FFTC_B 29
+#define KS2_LPSC_FFTC_C 30
+#define KS2_LPSC_FFTC_D 31
+#define KS2_LPSC_FFTC_E 32
+#define KS2_LPSC_FFTC_F 33
+#define KS2_LPSC_AI2 34
+#define KS2_LPSC_TCP3D_0 35
+#define KS2_LPSC_TCP3D_1 36
+#define KS2_LPSC_TCP3D_2 37
+#define KS2_LPSC_TCP3D_3 38
+#define KS2_LPSC_VCP2X4_A 39
+#define KS2_LPSC_CP2X4_B 40
+#define KS2_LPSC_VCP2X4_C 41
+#define KS2_LPSC_VCP2X4_D 42
+#define KS2_LPSC_VCP2X4_E 43
+#define KS2_LPSC_VCP2X4_F 44
+#define KS2_LPSC_VCP2X4_G 45
+#define KS2_LPSC_VCP2X4_H 46
+#define KS2_LPSC_BCP 47
+#define KS2_LPSC_DXB 48
+#define KS2_LPSC_VUSR1 49
+#define KS2_LPSC_XGE 50
+#define KS2_LPSC_ARM_SREFLEX 51
/* DDR3A definitions */
-#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
-#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
-#define K2HK_DDR3A_DDRPHYC 0x02329000
+#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000
+#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000
+#define KS2_DDR3A_DDRPHYC 0x02329000
/* DDR3B definitions */
-#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000
-#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000
-#define K2HK_DDR3B_DDRPHYC 0x02328000
+#define KS2_DDR3B_EMIF_CTRL_BASE 0x21020000
+#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000
+#define KS2_DDR3B_DDRPHYC 0x02328000
/* Queue manager */
-#define DEVICE_QM_MANAGER_BASE 0x02a02000
-#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000
-#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000
-#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
-#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000
-#define DEVICE_QM_NUM_LINKRAMS 2
-#define DEVICE_QM_NUM_MEMREGIONS 20
-
-#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000
-#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400
-#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800
-#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000
-
-#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24
-#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32
-#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9
+#define KS2_QM_MANAGER_BASE 0x02a02000
+#define KS2_QM_DESC_SETUP_BASE 0x02a03000
+#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000
+#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
+#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000
/* MSMC control */
-#define K2HK_MSMC_CTRL_BASE 0x0bc00000
+#define KS2_MSMC_CTRL_BASE 0x0bc00000
/* Number of DSP cores */
#define KS2_NUM_DSPS 8
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 0dcc31a..133edad 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -105,7 +105,7 @@ typedef volatile unsigned int *dv_reg_p;
#ifndef __ASSEMBLY__
static inline int cpu_is_k2hk(void)
{
- unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
unsigned int part_no = (jtag_id >> 12) & 0xffff;
return (part_no == 0xb981) ? 1 : 0;
@@ -113,7 +113,7 @@ static inline int cpu_is_k2hk(void)
static inline int cpu_revision(void)
{
- unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
unsigned int rev = (jtag_id >> 28) & 0xf;
return rev;
diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c
index b604266..31e9c31 100644
--- a/board/ti/k2hk_evm/ddr3.c
+++ b/board/ti/k2hk_evm/ddr3.c
@@ -299,20 +299,20 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_64A_pg2);
} else {
/* PG 1.1 */
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_64A);
}
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_64);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
} else {
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32);
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_32);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
}
@@ -323,18 +323,18 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_64A_pg2);
} else {
/* PG 1.1 */
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_64A);
}
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_64);
} else {
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32);
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_32);
}
} else {
@@ -344,6 +344,6 @@ void ddr3_init(void)
}
init_pll(&ddr3b_333);
- ddr3_init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64);
- ddr3_init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
+ ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64);
+ ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
}
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 63e0249..bacf3bc 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -73,7 +73,7 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
@@ -83,16 +83,16 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE
+#define CONFIG_SYS_SPI_BASE KS2_SPI_BASE
#define CONFIG_SYS_SPI0_NUM_CS 4
#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE
+#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
#define CONFIG_SYS_SPI1_NUM_CS 4
#define CONFIG_SYS_SPI2
#define CONFIG_SYS_SPI2_NUM_CS 4
-#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE
+#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
#define CONFIG_CMD_SPI
-#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI)
+#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI)
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
@@ -264,6 +264,6 @@
/* we may include files below only after all above definitions */
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6)
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
#endif /* __CONFIG_K2HK_EVM_H */
--
1.8.3.2
More information about the U-Boot
mailing list