[U-Boot] [PATCH] driver/mtd: Use generic timer API for FSL IFC, eLBC

Prabhakar Kushwaha prabhakar at freescale.com
Tue Jul 15 10:39:11 CEST 2014


Freescale's flash control driver is using architecture specific timer API
i.e. usec2ticks

Replace usec2ticks with get_timer() (generic timer API)

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---

 drivers/mtd/nand/fsl_elbc_nand.c |    8 ++++----
 drivers/mtd/nand/fsl_ifc_nand.c  |   21 ++++++++++-----------
 2 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 2f31fc9..58b55cb 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -37,7 +37,6 @@
 
 #define MAX_BANKS 8
 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
-#define FCM_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for FCM */
 
 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
 
@@ -199,7 +198,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
 	fsl_lbc_t *lbc = ctrl->regs;
-	long long end_tick;
+	u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
+	u32 time_start;
 	u32 ltesr;
 
 	/* Setup the FMR[OP] to execute without write protection */
@@ -218,10 +218,10 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	out_be32(&lbc->lsor, priv->bank);
 
 	/* wait for FCM complete flag or timeout */
-	end_tick = usec2ticks(FCM_TIMEOUT_MSECS * 1000) + get_ticks();
+	time_start = get_timer(0);
 
 	ltesr = 0;
-	while (end_tick > get_ticks()) {
+	while (get_timer(time_start) < timeo) {
 		ltesr = in_be32(&lbc->ltesr);
 		if (ltesr & LTESR_CC)
 			break;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 8b453cb..6c158f5 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -26,8 +26,6 @@
 #define MAX_BANKS	CONFIG_SYS_FSL_IFC_BANK_COUNT
 #define ERR_BYTE	0xFF /* Value returned for read bytes
 				when read failed */
-#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC
-				NAND Machine */
 
 struct fsl_ifc_ctrl;
 
@@ -292,7 +290,8 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
 	struct fsl_ifc_mtd *priv = chip->priv;
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc *ifc = ctrl->regs;
-	long long end_tick;
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	u32 time_start;
 	u32 eccstat[4];
 	int i;
 
@@ -304,9 +303,9 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
 		  IFC_NAND_SEQ_STRT_FIR_STRT);
 
 	/* wait for NAND Machine complete flag or timeout */
-	end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+	time_start = get_timer(0);
 
-	while (end_tick > get_ticks()) {
+	while (get_timer(time_start) < timeo) {
 		ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
 
 		if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
@@ -810,15 +809,16 @@ static int fsl_ifc_sram_init(uint32_t ver)
 	struct fsl_ifc *ifc = ifc_ctrl->regs;
 	uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
 	uint32_t ncfgr = 0;
-	long long end_tick;
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	u32 time_start;
 
 	if (ver > FSL_IFC_V1_1_0) {
 		ncfgr = ifc_in32(&ifc->ifc_nand.ncfgr);
 		ifc_out32(&ifc->ifc_nand.ncfgr, ncfgr | IFC_NAND_SRAM_INIT_EN);
 
 		/* wait for  SRAM_INIT bit to be clear or timeout */
-		end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
-		while (end_tick > get_ticks()) {
+		time_start = get_timer(0);
+		while (get_timer(time_start) < timeo) {
 			ifc_ctrl->status =
 				ifc_in32(&ifc->ifc_nand.nand_evter_stat);
 
@@ -861,10 +861,9 @@ static int fsl_ifc_sram_init(uint32_t ver)
 	/* start read seq */
 	ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
 
-	/* wait for NAND Machine complete flag or timeout */
-	end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+	time_start = get_timer(0);
 
-	while (end_tick > get_ticks()) {
+	while (get_timer(time_start) < timeo) {
 		ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
 
 		if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC)
-- 
1.7.9.5




More information about the U-Boot mailing list