[U-Boot] [PATCH 2/2] support blackfin board initialization in generic board_f

[Sonic Zhang]

From: Sonic Zhang <sonic.zhang at analog.com>

- init hardware watchdog if applicable
- use CONFIG_SYS_MONITOR_LEN as the gd monitor len for Blackfin
- reserve u-boot memory at the top field of the RAM for Blackfin
- avoid refer to CONFIG_SYS_MONITOR_LEN, which is not defined by Blackfin

Signed-off-by: Sonic Zhang <sonic.zhang at analog.com>
---

 common/board_f.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/common/board_f.c b/common/board_f.c
index bdab38e..079e1fa 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -107,6 +107,9 @@ __weak void blue_led_off(void) {}
 #if defined(CONFIG_WATCHDOG)
 static int init_func_watchdog_init(void)
 {
+#ifdef CONFIG_HW_WATCHDOG
+	hw_watchdog_init();
+#endif
 	puts("       Watchdog enabled\n");
 	WATCHDOG_RESET();
 
@@ -144,7 +147,11 @@ static int display_text_info(void)
 	bss_end = (ulong)&__bss_end;
 
 	debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX\n",
+#ifdef CONFIG_SYS_TEXT_BASE
 	      CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
+#else
+	      CONFIG_SYS_MONITOR_BASE, bss_start, bss_end);
+#endif
 #endif
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -259,6 +266,8 @@ static int setup_mon_len(void)
 	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #elif defined(CONFIG_SANDBOX)
 	gd->mon_len = (ulong)&_end - (ulong)_init;
+#elif defined(CONFIG_BLACKFIN)
+	gd->mon_len = CONFIG_SYS_MONITOR_LEN;
 #else
 	/* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
 	gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
@@ -719,7 +728,9 @@ static int reloc_fdt(void)
 
 static int setup_reloc(void)
 {
+#ifdef CONFIG_SYS_TEXT_BASE
 	gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
+#endif
 	memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
 
 	debug("Relocation Offset is: %08lx\n", gd->reloc_off);
@@ -802,7 +813,7 @@ static init_fnc_t init_sequence_f[] = {
 	/* TODO: can we rename this to timer_init()? */
 	init_timebase,
 #endif
-#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
+#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_BLACKFIN)
 	timer_init,		/* initialize timer */
 #endif
 #ifdef CONFIG_SYS_ALLOC_DPRAM
@@ -901,6 +912,10 @@ static init_fnc_t init_sequence_f[] = {
 	 *  - board info struct
 	 */
 	setup_dest_addr,
+#if defined(CONFIG_BLACKFIN)
+	/* Blackfin u-boot monitor should be on top of the ram */
+	reserve_uboot,
+#endif
 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 	reserve_logbuffer,
 #endif
@@ -921,7 +936,9 @@ static init_fnc_t init_sequence_f[] = {
 		&& !defined(CONFIG_ARM) && !defined(CONFIG_X86)
 	reserve_video,
 #endif
+#if !defined(CONFIG_BLACKFIN)
 	reserve_uboot,
+#endif
 #ifndef CONFIG_SPL_BUILD
 	reserve_malloc,
 	reserve_board,
-- 
1.8.2.3