[U-Boot] [PATCH 4/4] arm: add Cygnus and NSP boards
Steve Rae
srae at broadcom.com
Sat Jul 19 03:37:34 CEST 2014
From: Scott Branden <sbranden at broadcom.com>
The bcm_ep board configuration is used by a number of boards
including Cygnus and NSP.
Add builds for the bcm958300k and the bcm958622hr boards.
Signed-off-by: Scott Branden <sbranden at broadcom.com>
Signed-off-by: Steve Rae <srae at broadcom.com>
---
arch/arm/include/asm/arch-bcmcygnus/configs.h | 25 ++++++
arch/arm/include/asm/arch-bcmnsp/configs.h | 22 +++++
arch/arm/include/asm/iproc-common/configs.h | 20 +++++
board/broadcom/bcm_ep/Makefile | 7 ++
board/broadcom/bcm_ep/board.c | 62 ++++++++++++++
boards.cfg | 2 +
include/configs/bcm_ep_board.h | 111 ++++++++++++++++++++++++++
7 files changed, 249 insertions(+)
create mode 100644 arch/arm/include/asm/arch-bcmcygnus/configs.h
create mode 100644 arch/arm/include/asm/arch-bcmnsp/configs.h
create mode 100644 arch/arm/include/asm/iproc-common/configs.h
create mode 100644 board/broadcom/bcm_ep/Makefile
create mode 100644 board/broadcom/bcm_ep/board.c
create mode 100644 include/configs/bcm_ep_board.h
diff --git a/arch/arm/include/asm/arch-bcmcygnus/configs.h b/arch/arm/include/asm/arch-bcmcygnus/configs.h
new file mode 100644
index 0000000..5354637
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcmcygnus/configs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ARCH_CONFIGS_H
+#define __ARCH_CONFIGS_H
+
+#include <asm/iproc-common/configs.h>
+
+/* uArchitecture specifics */
+
+/* Serial Info */
+/* Post pad 3 bytes after each reg addr */
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_NS16550_CLK 100000000
+#define CONFIG_SYS_NS16550_CLK_DIV 54
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 0x18023000
+
+#endif /* __ARCH_CONFIGS_H */
diff --git a/arch/arm/include/asm/arch-bcmnsp/configs.h b/arch/arm/include/asm/arch-bcmnsp/configs.h
new file mode 100644
index 0000000..786deae
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcmnsp/configs.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ARCH_CONFIGS_H
+#define __ARCH_CONFIGS_H
+
+#include <asm/iproc-common/configs.h>
+
+/* uArchitecture specifics */
+
+/* Serial Info */
+/* no padding */
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+
+#define CONFIG_SYS_NS16550_CLK 0x03b9aca0
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 0x18000300
+
+#endif /* __ARCH_CONFIGS_H */
diff --git a/arch/arm/include/asm/iproc-common/configs.h b/arch/arm/include/asm/iproc-common/configs.h
new file mode 100644
index 0000000..c24de1f
--- /dev/null
+++ b/arch/arm/include/asm/iproc-common/configs.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IPROC_COMMON_CONFIGS_H
+#define __IPROC_COMMON_CONFIGS_H
+
+#include <linux/stringify.h>
+
+/* Architecture, CPU, chip, etc */
+#define CONFIG_IPROC
+#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
+
+/* Memory Info */
+#define CONFIG_SYS_TEXT_BASE 0x61000000
+#define CONFIG_SYS_SDRAM_BASE 0x61000000
+
+#endif /* __IPROC_COMMON_CONFIGS_H */
diff --git a/board/broadcom/bcm_ep/Makefile b/board/broadcom/bcm_ep/Makefile
new file mode 100644
index 0000000..8914e54
--- /dev/null
+++ b/board/broadcom/bcm_ep/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2014 Broadcom Corporation.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
diff --git a/board/broadcom/bcm_ep/board.c b/board/broadcom/bcm_ep/board.c
new file mode 100644
index 0000000..df17f72
--- /dev/null
+++ b/board/broadcom/bcm_ep/board.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <config.h>
+#include <asm/system.h>
+#include <asm/iproc-common/armpll.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * board_init - early hardware init
+ */
+int board_init(void)
+{
+ /* Address of boot parameters passed to kernel
+ * Use default offset 0x100
+ */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
+
+/*
+ * misc_init_r - miscellaneous platform dependent initializations
+ */
+int misc_init_r(void)
+{
+ return 0;
+}
+
+/*
+ * dram_init - sets u-boot's idea of sdram size
+ */
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+int board_early_init_f(void)
+{
+ uint32_t status = 0;
+
+ /* Setup PLL if required */
+#if defined(CONFIG_ARMCLK)
+ armpll_config(CONFIG_ARMCLK);
+#endif
+
+ return status;
+}
diff --git a/boards.cfg b/boards.cfg
index 1ba2081..25eaaee 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -289,6 +289,8 @@ Active arm armv7 at91 atmel sama5d3xek
Active arm armv7 at91 atmel sama5d3xek sama5d3xek_nandflash sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH Bo Shen <voice.shen at atmel.com>
Active arm armv7 at91 atmel sama5d3xek sama5d3xek_spiflash sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH Bo Shen <voice.shen at atmel.com>
Active arm armv7 bcm281xx broadcom bcm28155_ap bcm28155_ap bcm28155_ap Tim Kryger <tim.kryger at linaro.org>
+Active arm armv7 bcmcygnus broadcom bcm_ep bcm958300k bcm_ep_board:SYS_SDRAM_SIZE=0x20000000 Steve Rae <srae at broadcom.com>
+Active arm armv7 bcmnsp broadcom bcm_ep bcm958622hr bcm_ep_board:SYS_SDRAM_SIZE=0x01000000 Steve Rae <srae at broadcom.com>
Active arm armv7 exynos samsung arndale arndale - Inderpal Singh <inderpal.singh at linaro.org>
Active arm armv7 exynos samsung origen origen - Chander Kashyap <k.chander at samsung.com>
Active arm armv7 exynos samsung smdk5250 smdk5250 - Chander Kashyap <k.chander at samsung.com>
diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h
new file mode 100644
index 0000000..27b817b
--- /dev/null
+++ b/include/configs/bcm_ep_board.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BCM_EP_BOARD_H
+#define __BCM_EP_BOARD_H
+
+#include <linux/sizes.h>
+#include <asm/arch/configs.h>
+
+/* Architecture, CPU, chip, etc */
+#define CONFIG_ARMV7
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/*
+ * Memory configuration
+ *
+ * CONFIG_SYS_TEXT_BASE, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE
+ * defined in boards.cfg
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
+#define CONFIG_STACKSIZE SZ_256K
+
+/* Init functions */
+#define CONFIG_MISC_INIT_R /* board's misc_init_r function */
+
+/* Some commands use this as the default load address */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+
+/* No mtest functions as recommended */
+#undef CONFIG_CMD_MEMORY
+
+/*
+ * This is the initial SP which is used only briefly for relocating the u-boot
+ * image to the top of SDRAM. After relocation u-boot moves the stack to the
+ * proper place.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Serial Info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
+
+/* console configuration */
+#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * One partition type must be defined for part.c
+ * This is necessary for the fatls command to work on an SD card
+ * for example.
+ */
+#define CONFIG_DOS_PARTITION
+
+/* version string, parser, etc */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* SHA hashing */
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+/* Enable Time Command */
+#define CONFIG_CMD_TIME
+
+#define CONFIG_CMD_BOOTZ
+
+/* Misc utility code */
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CRC32_VERIFY
+
+#endif /* __BCM_EP_BOARD_H */
--
1.8.5
More information about the U-Boot
mailing list