[U-Boot] [PATCH 1/6] usb: ci_udc: fix ci_flush_{qh, qtd} calls in ci_udc_probe()

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

ci_udc_probe() initializes a pair of QHs and QTDs for each EP. After
each pair has been initialized, the pair is cache-flushed. The
conversion from QH/QTD index [0..2*NUM_END_POINTS) to EP index
[0..NUM_ENDPOINTS] is incorrect; it simply subtracts 1 (which yields
the QH/QTD index of the first entry in the pair) rather than dividing
by two (which scales the range). Fix this.

On my system, this avoids cache debug prints due to requests to flush
unaligned ranges. This is caused because the flush calls happen before
the items[] array entries are initialized for all but EP0.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 drivers/usb/gadget/ci_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index a6433e8d2d8d..8ba604841c47 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -834,8 +834,8 @@ static int ci_udc_probe(void)
 		controller.items[i] = (struct ept_queue_item *)imem;
 
 		if (i & 1) {
-			ci_flush_qh(i - 1);
-			ci_flush_qtd(i - 1);
+			ci_flush_qh(i / 2);
+			ci_flush_qtd(i / 2);
 		}
 	}
 
-- 
1.8.1.5