[U-Boot] [PATCH 2/2] usb: phy: omap_usb_phy: implement usb_phy_power() for AM437x

Felipe Balbi balbi at ti.com
Thu Jul 10 06:02:43 CEST 2014


Newer AM437x silicon requires us to explicitly power up
the USB2 PHY. By implementing usb_phy_power() we can
achieve that.

Signed-off-by: Felipe Balbi <balbi at ti.com>
---
 arch/arm/include/asm/arch-am33xx/hardware_am43xx.h |  5 +++++
 drivers/usb/phy/omap_usb_phy.c                     | 11 ++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
index b470319..efdecf4 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
@@ -43,6 +43,11 @@
 #define VTP0_CTRL_ADDR			0x44E10E0C
 #define VTP1_CTRL_ADDR			0x48140E10
 
+/* USB CTRL Base Address */
+#define USB1_CTRL			0x44e10628
+#define USB1_CTRL_CM_PWRDN		BIT(0)
+#define USB1_CTRL_OTG_PWRDN		BIT(1)
+
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x44E12000
 #define DDR_PHY_DATA_ADDR		0x44E120C8
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
index af46db2..53778b3 100644
--- a/drivers/usb/phy/omap_usb_phy.c
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -222,7 +222,16 @@ static void am437x_enable_usb2_phy2(struct omap_xhci *omap)
 
 void usb_phy_power(int on)
 {
-	return;
+	/*
+	 * In order to get USB working on newer AM43xx silicon, we must
+	 * explicitly power the USB PHYs.
+	 */
+	if (on)
+		clrbits_le32(USB1_CTRL, USB1_CTRL_CM_PWRDN |
+				USB1_CTRL_OTG_PWRDN);
+	else
+		setbits_le32(USB1_CTRL, USB1_CTRL_CM_PWRDN |
+				USB1_CTRL_OTG_PWRDN);
 }
 #endif /* CONFIG_AM437X_USB2PHY2_HOST */
 
-- 
2.0.0.390.gcb682f8



More information about the U-Boot mailing list