[U-Boot] [PATCH v1 0/7] TI: armv7: add parallel NAND support

[Pekon Gupta]

This patch series adds support for parallel NAND devices support connected via
GPMC chip-select on various boards belonging to AM33xx and OMAPx platforms.
This series also moves some board specific CONFIG_NAND_xx from generic files
to individual files.

Tested using: ./MAKEALL -s am33xx -s omap3 -s oamp4 -s omap5
	works fine except for am335x_boneblack_vboot
	build breaks for am335x_boneblack_vboot for un-related reasons
		u-boot/scripts/dtc-version.sh: line 17: dtc: command not found
	

Pekon Gupta (7):
  TI: armv7: move board specific NAND configs out from ti_armv7_common.h
    and ti_am335x_common.h
  board/ti/am335x: add support for beaglebone NAND cape
  arm: lib: continue board_init_r even if valid flash device is not
    detected
  board/ti/am335x: add support for beaglebone NOR Cape
  board/ti/am335x: update configs for parallel NAND
  board/ti/am43xx: add support for parallel NAND
  board/ti/dra7xx: add support for parallel NAND

 arch/arm/lib/board.c               |   7 +-
 board/ti/am335x/mux.c              | 149 ++++++++++++++++++-------------------
 board/ti/am43xx/board.c            |   1 +
 board/ti/am43xx/mux.c              |  42 +++++++++++
 board/ti/dra7xx/mux_data.h         |  30 ++++++++
 boards.cfg                         |   4 +-
 doc/README.nand                    |  12 +++
 include/configs/am335x_evm.h       |  64 +++++++++-------
 include/configs/am43xx_evm.h       |  70 +++++++++++++++++
 include/configs/cm_t335.h          |  10 +++
 include/configs/dra7xx_evm.h       |  58 ++++++++++++++-
 include/configs/omap3_beagle.h     |   6 ++
 include/configs/omap3_igep00x0.h   |   9 +++
 include/configs/omap3_overo.h      |   8 ++
 include/configs/omap3_zoom1.h      |   7 ++
 include/configs/pengwyn.h          |   7 ++
 include/configs/ti_am335x_common.h |   4 -
 include/configs/ti_armv7_common.h  |   9 ---
 18 files changed, 369 insertions(+), 128 deletions(-)

-- 
1.8.5.1.163.gd7aced9